[Buildroot] [PATCH v3 1/1] mender-grubenv: new package

[Mirza Krak]

On Mon, Jun 10, 2019 at 9:05 AM Mirza Krak <mirza.krak at northern.tech> wrote:
>
> On Thu, Jun 6, 2019 at 5:52 PM <aduskett at gmail.com> wrote:
> >
> > From: Adam Duskett <Aduskett at gmail.com>
> >
> > Mender-grubenv contains the boot scripts and tools used by Mender to
> > integrate with the Grub2 bootloader.
> >
> > The user must select the following Grub modules for this package:
> > loadenv, hashsum, echo, halt, gcry_sha256, and test.
> >
> > Because this patch also includes a grub version of fw_printenv and fw_setenv,
> > package/mender/Config.in must be changed as well at the same time, because if
> > both uboot-tools and this package are selected, during startup, mender calls
> > the uboot-tools version of fw_printenv and fails to start.
> >
> > Signed-off-by: Adam Duskett <Aduskett at gmail.com>
>
> Tested-by: Mirza Krak <mirza.krak at northern.tech>
> Signed-off-by: Mirza Krak <mirza.krak at northern.tech>

Ops, the "Signed-off-by" should be,

Acked-by: Mirza Krak <mirza.krak at northern.tech>

-- 
Mirza Krak | Embedded Solutions Architect | https://mender.io

 Northern.tech AS | @northerntechHQ