[Buildroot] [PATCH] configs/qemu_riscv64_virt_defconfig: bump Linux version
Mark Corbin
mark.corbin at embecosm.com
Tue Jan 22 11:51:21 UTC 2019
Hello Gwenhael
On 21/01/2019 20:04, Gwenhael Goavec-Merou wrote:
> From: Gwenhael Goavec-Merou <gwenhael.goavec-merou at trabucayre.com>
>
> Since riscv64 works with linux default defconfig, this patch drop custom config.
>
> Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou at trabucayre.com>
> ---
> board/qemu/riscv64-virt/linux.config | 23 -----------------------
> configs/qemu_riscv64_virt_defconfig | 9 ++++-----
> 2 files changed, 4 insertions(+), 28 deletions(-)
> delete mode 100644 board/qemu/riscv64-virt/linux.config
>
> diff --git a/board/qemu/riscv64-virt/linux.config b/board/qemu/riscv64-virt/linux.config
> deleted file mode 100644
> index d09e8b3bb1..0000000000
> --- a/board/qemu/riscv64-virt/linux.config
> +++ /dev/null
> @@ -1,23 +0,0 @@
> -CONFIG_ARCH_RV64I=y
> -CONFIG_SMP=y
> -CONFIG_NR_CPUS=8
> -CONFIG_PCI=y
> -CONFIG_SYSVIPC=y
> -CONFIG_NET=y
> -CONFIG_PACKET=y
> -CONFIG_UNIX=y
> -CONFIG_INET=y
> -# CONFIG_WIRELESS is not set
> -CONFIG_VIRTIO_BLK=y
> -CONFIG_NETDEVICES=y
> -CONFIG_VIRTIO_NET=y
> -# CONFIG_ETHERNET is not set
> -# CONFIG_WLAN is not set
> -CONFIG_SERIAL_8250=y
> -CONFIG_SERIAL_8250_CONSOLE=y
> -CONFIG_SERIAL_OF_PLATFORM=y
> -CONFIG_VIRT_DRIVERS=y
> -CONFIG_VIRTIO_MMIO=y
> -CONFIG_EXT2_FS=y
> -CONFIG_EXT4_FS=y
> -CONFIG_TMPFS=y
> diff --git a/configs/qemu_riscv64_virt_defconfig b/configs/qemu_riscv64_virt_defconfig
> index e15f804341..705ec1293a 100644
> --- a/configs/qemu_riscv64_virt_defconfig
> +++ b/configs/qemu_riscv64_virt_defconfig
> @@ -10,16 +10,15 @@ BR2_TARGET_ROOTFS_EXT2=y
> BR2_TARGET_GENERIC_GETTY=y
> BR2_TARGET_GENERIC_GETTY_PORT="ttyS0"
>
> -# Linux headers same as kernel, a 4.15 series
> -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_15=y
> +# Linux headers same as kernel, a 4.20 series
> +BR2_KERNEL_HEADERS_4_20=y
>
> # Kernel
> BR2_LINUX_KERNEL=y
> BR2_LINUX_KERNEL_CUSTOM_GIT=y
> BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/riscv/riscv-linux.git"
> -BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="fe92d7905c6ea0ebeabeb725b8040754ede7c220"
> -BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
> -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/riscv64-virt/linux.config"
> +BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="8fe28cb58bcb235034b64cbbb7550a8a43fd88be"
> +BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y
>
> # Bootloader
> BR2_TARGET_RISCV_PK=y
This builds on my system and boots under QEMU 2.12.0.
Tested-by: Mark Corbin <mark.corbin at embecosm.com>
--
Mark Corbin
Embecosm Ltd.
https://www.embecosm.com
More information about the buildroot
mailing list