[Buildroot] [PATCH v2 5/5] package/mender: adding a readme file

[Adam Duskett]

All;

On Tue, Feb 5, 2019 at 11:24 AM Angelo Compagnucci
<angelo at amarulasolutions.com> wrote:
>
> This patch adds a readme file with basic instructions to get mender up
> and running on a production system.
>
> Signed-off-by: Angelo Compagnucci <angelo at amarulasolutions.com>
> ---
>  package/mender/readme.txt | 18 ++++++++++++++++++
>  1 file changed, 18 insertions(+)
>  create mode 100644 package/mender/readme.txt
>
> diff --git a/package/mender/readme.txt b/package/mender/readme.txt
> new file mode 100644
> index 0000000..329b2a4
> --- /dev/null
> +++ b/package/mender/readme.txt
> @@ -0,0 +1,18 @@
> +=== Notes on using Mender on Buildroot
> +======================================
> +Default configurations files
> +----------------------------
> +
> +Buildroot comes with a default artifact_info and device_type configuration files
> +in /etc/mender. They contain default values, and thus they should be overridden
> +on a production system.
> +
> +The simplest way to do it is to change these files in an overlay or in a post
> +build script.
> +
> +Configuring mender with certificates
> +------------------------------------
> +
> +Mender uses TLS to communicate with the management server and, if you use a
> +CA-signed certificate on the server, you should select the ca-certificates
> +package otherwise it doesn't work.
> --
> 2.7.4
>
> _______________________________________________
> buildroot mailing list
> buildroot at busybox.net
> http://lists.busybox.net/mailman/listinfo/buildroot

Acked-by: <aduskett at gmail.com>