[Buildroot] [PATCH v3 9/9] configs/nxp_ls1028ardb*: new board
Vladimir Oltean
olteanv at gmail.com
Tue Dec 3 01:48:41 UTC 2019
On Wed, 27 Nov 2019 at 09:18, Changming Huang <jerry.huang at nxp.com> wrote:
>
> This is to support Freescale/NXP LS1028ARDB in Buildroot.
> The board is setup to track the Linux at 4.19 via NXP LSDK-19.09.
>
> The target will build uboot and RCW binary with arm-trusted-firmware support.
>
> board/nxp/ls1028ardb/: scripts related with ls1028ardb
> nxp_ls1028ardb-64b-emmc_defconfig: defconfig boot from emmc chip on board
> nxp_ls1028ardb-64b_defconfig: defconfig boot from SD card
> nxp_ls1028ardb-64b-xspi_defconfig: defconfig boot from FlexSPI chip on board
>
> Signed-off-by: Changming Huang <jerry.huang at nxp.com>
> ---
> changes since v2:
> 1. Modify the qoriq-cadence-dp-firmware option in defconfig.
> 2. rename defconfig to nxp_ls1028*.
> 3. remove extra packages except busybox in defconfig.
> 4. modify the description of file genimage.xspi.cfg.template.
>
> changes since v1:
> 1. add new option in configs/freescale_ls1028ardb-xxxx_defconfig.
> ---
> .gitlab-ci.yml | 3 +
> DEVELOPERS | 2 +
> .../nxp/ls1028ardb/genimage.emmc.cfg.template | 52 ++++++++++++
> board/nxp/ls1028ardb/genimage.sd.cfg.template | 52 ++++++++++++
> .../nxp/ls1028ardb/genimage.xspi.cfg.template | 55 ++++++++++++
> board/nxp/ls1028ardb/kernel.its | 59 +++++++++++++
> board/nxp/ls1028ardb/ls1028-10-network.rules | 16 ++++
> board/nxp/ls1028ardb/post-cfg-udev.sh | 10 +++
> board/nxp/ls1028ardb/readme.txt | 61 +++++++++++++
> .../ls1028ardb/u-boot-environment-emmc.txt | 22 +++++
> .../nxp/ls1028ardb/u-boot-environment-sd.txt | 21 +++++
> .../ls1028ardb/u-boot-environment-xspi.txt | 22 +++++
> configs/nxp_ls1028ardb-64b-emmc_defconfig | 85 +++++++++++++++++++
> configs/nxp_ls1028ardb-64b-xspi_defconfig | 85 +++++++++++++++++++
> configs/nxp_ls1028ardb-64b_defconfig | 85 +++++++++++++++++++
> 15 files changed, 630 insertions(+)
> create mode 100644 board/nxp/ls1028ardb/genimage.emmc.cfg.template
> create mode 100644 board/nxp/ls1028ardb/genimage.sd.cfg.template
> create mode 100644 board/nxp/ls1028ardb/genimage.xspi.cfg.template
> create mode 100644 board/nxp/ls1028ardb/kernel.its
> create mode 100644 board/nxp/ls1028ardb/ls1028-10-network.rules
> create mode 100755 board/nxp/ls1028ardb/post-cfg-udev.sh
> create mode 100644 board/nxp/ls1028ardb/readme.txt
> create mode 100644 board/nxp/ls1028ardb/u-boot-environment-emmc.txt
> create mode 100644 board/nxp/ls1028ardb/u-boot-environment-sd.txt
> create mode 100644 board/nxp/ls1028ardb/u-boot-environment-xspi.txt
> create mode 100644 configs/nxp_ls1028ardb-64b-emmc_defconfig
> create mode 100644 configs/nxp_ls1028ardb-64b-xspi_defconfig
> create mode 100644 configs/nxp_ls1028ardb-64b_defconfig
>
> diff --git a/.gitlab-ci.yml b/.gitlab-ci.yml
> index 22befa0427..08e6360ff7 100644
> --- a/.gitlab-ci.yml
> +++ b/.gitlab-ci.yml
> @@ -223,6 +223,9 @@ nitrogen6sx_defconfig: { extends: .defconfig }
> nitrogen6x_defconfig: { extends: .defconfig }
> nitrogen7_defconfig: { extends: .defconfig }
> nitrogen8m_defconfig: { extends: .defconfig }
> +nxp_ls1028ardb-64b-emmc_defconfig: { extends: .defconfig }
> +nxp_ls1028ardb-64b_defconfig: { extends: .defconfig }
> +nxp_ls1028ardb-64b-xspi_defconfig: { extends: .defconfig }
> odroidxu4_defconfig: { extends: .defconfig }
> olimex_a10_olinuxino_lime_defconfig: { extends: .defconfig }
> olimex_a13_olinuxino_defconfig: { extends: .defconfig }
> diff --git a/DEVELOPERS b/DEVELOPERS
> index 6fd8f8ee08..efe4039194 100644
> --- a/DEVELOPERS
> +++ b/DEVELOPERS
> @@ -515,6 +515,8 @@ F: configs/orangepi_plus_defconfig
>
> N: Changming Huang <jerry.huang at nxp.com>
> F: board/nxp/common/ls/
> +F: board/nxp/ls1028ardb/
> +F: configs/nxp_ls1028ardb*
> F: package/nxp/qoriq-cadence-dp-firmware/
>
> N: Chris Packham <judge.packham at gmail.com>
> diff --git a/board/nxp/ls1028ardb/genimage.emmc.cfg.template b/board/nxp/ls1028ardb/genimage.emmc.cfg.template
> new file mode 100644
> index 0000000000..3afbda494e
> --- /dev/null
> +++ b/board/nxp/ls1028ardb/genimage.emmc.cfg.template
> @@ -0,0 +1,52 @@
> +# Minimal eMMC boot image for the NXP boards Template
> +#
> +# eMMC image (sdcard.img) format:
> +# * the eMMC must have 4 kB free space at the beginning,
> +# * U-Boot is dumped as is,
> +# * a FAT partition at offset 64 MB is containing Image and DTB files
> +# * a single root filesystem partition is required (ext2, ext3 or ext4)
> +#
> +
> +image boot.vfat {
> + vfat {
> + files = {
> + %FILES%
> + }
> + }
> + size = 256M
> +}
> +
> +image sdcard.img {
> + hdimage {
> + }
> +
> + partition rcw {
> + in-partition-table = "no"
> + image = "bl2_emmc.pbl"
> + offset = 4096
> + }
> +
> + partition u-boot {
> + in-partition-table = "no"
> + image = "fip.bin"
> + offset = 1M
> + }
> +
> + partition u-boot-environment {
> + in-partition-table = "no"
> + image = "uboot-env.bin"
> + offset = 5M
> + }
> +
> + partition boot {
> + partition-type = 0xC
> + bootable = "true"
> + image = "boot.vfat"
> + offset = 64M
> + }
> +
> + partition rootfs {
> + partition-type = 0x83
> + image = "rootfs.ext2"
> + }
> +}
> diff --git a/board/nxp/ls1028ardb/genimage.sd.cfg.template b/board/nxp/ls1028ardb/genimage.sd.cfg.template
> new file mode 100644
> index 0000000000..ab50e103c1
> --- /dev/null
> +++ b/board/nxp/ls1028ardb/genimage.sd.cfg.template
> @@ -0,0 +1,52 @@
> +# Minimal SD card image for the NXP boards Template
> +#
> +# SD card image (sdcard.img) format:
> +# * the SD card must have 4 kB free space at the beginning,
> +# * U-Boot is dumped as is,
> +# * a FAT partition at offset 64 MB is containing Image and DTB files
> +# * a single root filesystem partition is required (ext2, ext3 or ext4)
> +#
> +
> +image boot.vfat {
> + vfat {
> + files = {
> + %FILES%
> + }
> + }
> + size = 256M
> +}
> +
> +image sdcard.img {
> + hdimage {
> + }
> +
> + partition rcw {
> + in-partition-table = "no"
> + image = "bl2_sd.pbl"
> + offset = 4096
> + }
> +
> + partition u-boot {
> + in-partition-table = "no"
> + image = "fip.bin"
> + offset = 1M
> + }
> +
> + partition u-boot-environment {
> + in-partition-table = "no"
> + image = "uboot-env.bin"
> + offset = 5M
> + }
> +
> + partition boot {
> + partition-type = 0xC
> + bootable = "true"
> + image = "boot.vfat"
> + offset = 64M
> + }
> +
> + partition rootfs {
> + partition-type = 0x83
> + image = "rootfs.ext2"
> + }
> +}
> diff --git a/board/nxp/ls1028ardb/genimage.xspi.cfg.template b/board/nxp/ls1028ardb/genimage.xspi.cfg.template
> new file mode 100644
> index 0000000000..1bc3a4ec49
> --- /dev/null
> +++ b/board/nxp/ls1028ardb/genimage.xspi.cfg.template
> @@ -0,0 +1,55 @@
> +# Minimal XSPI (FlexSPI) image for the NXP boards Template
> +#
> +# FlexSPI image (xspi.cpio.img) format:
> +# * For ls1028ardb, the FlexSPI flash size is 256MB, erase size is 128KB
> +# * bl2_flexspi_nor.bpl: the RCW with ATF header
> +# * fib.bin: u-boot-dtb.bin binary with ATF header
> +# * Kernel.itb:
> +# * offset 16MB, include Kernel, ramdisk file system and DTB file
> +#
> +flash xspi-256M-128K {
> + pebsize = 128K
> + numpebs = 2048
> + minimum-io-unit-size = 128k
> +}
> +
> +image xspi.cpio.img {
> + flash {
> + }
> + flashtype = "xspi-256M-128K"
> +
> + partition rcw {
> + in-partition-table = "no"
> + image = "bl2_flexspi_nor.pbl"
> + offset = 0
> + size = 1M
> + }
> +
> + partition u-boot {
> + in-partition-table = "no"
> + image = "fip.bin"
> + offset = 1M
> + size = 4M
> + }
> +
> + partition u-boot-environment {
> + in-partition-table = "no"
> + image = "uboot-env.bin"
> + offset = 5M
> + size = 1M
> + }
> +
> + partition dp-firmware {
> + in-partition-table = "no"
> + image = "ls1028a-dp-fw.bin"
> + offset = 0x940000
> + size = 256K
> + }
> +
> + partition boot {
> + in-partition-table = "no"
> + image = "kernel.itb"
> + offset = 16M
> + size = 48M
> + }
> +}
> diff --git a/board/nxp/ls1028ardb/kernel.its b/board/nxp/ls1028ardb/kernel.its
> new file mode 100644
> index 0000000000..08e9700f30
> --- /dev/null
> +++ b/board/nxp/ls1028ardb/kernel.its
> @@ -0,0 +1,59 @@
> +/*
> + * Copyright 2019 NXP
> + *
> + * Changming Huang <jerry.huang at nxp.com>
> + *
> + * SPDX-License-Identifier: GPL-2.0+
> + */
> +
> +/dts-v1/;
> +
> +/ {
> + description = "Image file for the LS1028A Linux Kernel";
> + #address-cells = <1>;
> +
> + images {
> + kernel at 1 {
> + description = "ARM64 Linux kernel";
> + data = /incbin/("./Image.gz");
> + type = "kernel";
> + arch = "arm64";
> + os = "linux";
> + compression = "gzip";
> + load = <0x80080000>;
> + entry = <0x80080000>;
> + };
> + fdt at 1 {
> + description = "Flattened Device Tree blob";
> + data = /incbin/("./fsl-ls1028a-rdb.dtb");
> + type = "flat_dt";
> + arch = "arm64";
> + compression = "none";
> + load = <0x90000000>;
> + };
> + ramdisk at 1 {
> + description = "LS1028 Ramdisk";
> + data = /incbin/("./rootfs.cpio.gz");
> + type = "ramdisk";
> + arch = "arm64";
> + os = "linux";
> + compression = "gzip";
> + };
> + };
> +
> + configurations {
> + default = "config at 1";
> + config at 1 {
> + description = "Boot Linux kernel";
> + kernel = "kernel at 1";
> + fdt = "fdt at 1";
> + ramdisk = "ramdisk at 1";
> + };
> + ls1028ardb {
> + description = "Boot Linux kernel";
> + kernel = "kernel at 1";
> + fdt = "fdt at 1";
> + ramdisk = "ramdisk at 1";
> + };
> + };
> +};
> diff --git a/board/nxp/ls1028ardb/ls1028-10-network.rules b/board/nxp/ls1028ardb/ls1028-10-network.rules
> new file mode 100644
> index 0000000000..19f41634bd
> --- /dev/null
> +++ b/board/nxp/ls1028ardb/ls1028-10-network.rules
> @@ -0,0 +1,16 @@
> +# ENETC rules
> +ACTION=="add", SUBSYSTEM=="net", KERNELS=="0000:00:00.0", DRIVERS=="fsl_enetc", NAME:="eno0"
> +ACTION=="add", SUBSYSTEM=="net", KERNELS=="0000:00:00.1", DRIVERS=="fsl_enetc", NAME:="eno1"
> +ACTION=="add", SUBSYSTEM=="net", KERNELS=="0000:00:00.2", DRIVERS=="fsl_enetc", NAME:="eno2"
> +ACTION=="add", SUBSYSTEM=="net", KERNELS=="0000:00:00.6", DRIVERS=="fsl_enetc", NAME:="eno3"
> +ACTION=="add", SUBSYSTEM=="net", KERNELS=="0000:00:01.0", DRIVERS=="fsl_enetc_vf", NAME:="eno0vf0"
> +ACTION=="add", SUBSYSTEM=="net", KERNELS=="0000:00:01.1", DRIVERS=="fsl_enetc_vf", NAME:="eno0vf1"
> +ACTION=="add", SUBSYSTEM=="net", KERNELS=="0000:00:01.2", DRIVERS=="fsl_enetc_vf", NAME:="eno1vf0"
> +ACTION=="add", SUBSYSTEM=="net", KERNELS=="0000:00:01.3", DRIVERS=="fsl_enetc_vf", NAME:="eno1vf1"
> +# LS1028 switch rules
> +ACTION=="add", SUBSYSTEM=="net", KERNELS=="0000:00:00.5", DRIVERS=="mscc_felix", ATTR{phys_port_name}=="p0", NAME="swp0"
> +ACTION=="add", SUBSYSTEM=="net", KERNELS=="0000:00:00.5", DRIVERS=="mscc_felix", ATTR{phys_port_name}=="p1", NAME="swp1"
> +ACTION=="add", SUBSYSTEM=="net", KERNELS=="0000:00:00.5", DRIVERS=="mscc_felix", ATTR{phys_port_name}=="p2", NAME="swp2"
> +ACTION=="add", SUBSYSTEM=="net", KERNELS=="0000:00:00.5", DRIVERS=="mscc_felix", ATTR{phys_port_name}=="p3", NAME="swp3"
> +ACTION=="add", SUBSYSTEM=="net", KERNELS=="0000:00:00.5", DRIVERS=="mscc_felix", ATTR{phys_port_name}=="p4", NAME="swp4"
> +ACTION=="add", SUBSYSTEM=="net", KERNELS=="0000:00:00.5", DRIVERS=="mscc_felix", ATTR{phys_port_name}=="p5", NAME="swp5"
> diff --git a/board/nxp/ls1028ardb/post-cfg-udev.sh b/board/nxp/ls1028ardb/post-cfg-udev.sh
> new file mode 100755
> index 0000000000..311a93aee2
> --- /dev/null
> +++ b/board/nxp/ls1028ardb/post-cfg-udev.sh
> @@ -0,0 +1,10 @@
> +#!/usr/bin/env bash
> +
> +main()
> +{
> + cp board/nxp/ls1028ardb/ls1028-10-network.rules ${TARGET_DIR}/etc/udev/rules.d/10-network.rules
Shouldn't this be a part of a BR2_ROOTFS_OVERLAY fragment?
> +
> + exit $?
> +}
> +
> +main $@
> diff --git a/board/nxp/ls1028ardb/readme.txt b/board/nxp/ls1028ardb/readme.txt
> new file mode 100644
> index 0000000000..713babd7c3
> --- /dev/null
> +++ b/board/nxp/ls1028ardb/readme.txt
> @@ -0,0 +1,61 @@
> +LS1028ARDB board is one platform based on LS1028A silicon for industry,
> +which is supported in LSDK-19.09.
> +
> +One simple image file is created by buildroot, which includes RCW, uboot,
> +Linux kernel, rootfs and other necessary binaries for this board.
> +
> +To program the image file created by buildroot into the flash.
> +There are two way to do it:
> +
> +1. Program the image file on PC machine for SD card boot
> + $ sudo dd if=./output/images/sdcard.img of=/dev/sdx
> + # or in some other host machine:
> + $ sudo dd if=./output/images/sdcard.img of=/dev/mmcblkx
> +
> + # find the right SD Card device name in your host machine and replace the
> + # “sdx” or “mmcblkx”.
> +
> +2. Program the image file on board for eMMC and XSPI boot
> +Make sure your board has ipaddr, netmask, and serverip defined to reach your
> +tftp server.
> +
> + 2.1 Program eMMC boot image file to eMMC chip
> + # Make sure output/images/sdcard.img is stored to tftp server
> + # Below command is one example
> + => tftpboot 0xa0000000 sdcard.img
> + => mmc dev 1
> + => mmc erase 0 0x200000
> + => mmc write 0xa0000000 0 0x200000
> +
> + # The size "0x200000" will be changed when the image size is different.
> +
> + 2.2 Program XSPI boot image file to flash
> + # Make sure output/images/xspi.cpio.img is stored to tftp server
> + # Below command is one example
> + => tftpboot 0xa0000000 xspi.cpio.img
> + => sf probe
> + => sf erase 0 $filesize
> + => sf write 0xa0000000 0 $filesize
> +
> +3. Booting your new system
> +Before booting the new system, we should make sure the switch setting is right.
> +below switch setting is for each booting mode:
> + +-----------+---------------------+
> + |Boot mode | Switch setting |
> + +---------------------------------+
> + |SD boot | SW2[1~4] = 0b’1000 |
> + +---------------------------------+
> + |eMMC boot | SW2[1~4] = 0b’1001 |
> + +---------------------------------+
> + |XSPI boot | SW2[1~4] = 0b’1111 |
> + +-----------+---------------------+
> +
> +or we use following command to reset the board in uboot prompt:
> + # boot from SD card
> + => qixis_reset sd
> +
> + # boot from eMMC chip
> + => qixis_reset emmc
> +
> + # boot from XSPI
> + => qixis_reset qspi
> diff --git a/board/nxp/ls1028ardb/u-boot-environment-emmc.txt b/board/nxp/ls1028ardb/u-boot-environment-emmc.txt
> new file mode 100644
> index 0000000000..01a97aa89d
> --- /dev/null
> +++ b/board/nxp/ls1028ardb/u-boot-environment-emmc.txt
> @@ -0,0 +1,22 @@
> +baudrate=115200
> +bootcmd=setenv bootargs root=/dev/mmcblk1p2 rootwait rw earlycon=uart8250,0x21c0500 console=ttyS0,115200 cma=256M video=1920x1080-32 at 60;mmc dev 1;mmcinfo;fatload mmc 1:1 ${dp_load} ${dp_file};hdp load ${dp_load} ${dp_offset};fatload mmc 1:1 ${loadaddr} ${bootfile};fatload mmc 1:1 ${fdtaddr} ${fdtfile};booti ${loadaddr} - ${fdtaddr}
> +bootdelay=3
> +bootfile=Image
> +fdtfile=fsl-ls1028a-rdb.dtb
> +eth2addr=00:1F:7B:63:35:E9
Do we really want to put a MAC address in the U-Boot environment? This
will work ok for the first board, but not so well for the second board
that you put in the same network.
And actually, do we want a U-Boot environment at all? The LSDK U-Boot
default environment is distroboot enabled. With the proper
extlinux.conf file generated by post-image.sh, it can load Buildroot
in a breeze with no custom script necessary:
label Buildroot %VERSION% - %BOARD%
kernel %KERNEL%
devicetree %DTB%
append console=ttyS0,115200n8 root=/dev/mmcblk0p2 rw rootwait
> +ethact=FM1 at DTSEC3
> +ethprime=FM1 at DTSEC3
There is certainly no DTSEC port on LS1028A.
> +fdt_high=0xffffffffffffffff
> +fdtcontroladdr=ffc01550
> +fman_ucode=ffc12090
And no FMan microcode.
> +hwconfig=fsl_ddr:bank_intlv=auto
> +initrd_high=0xffffffffffffffff
> +loadaddr=0xa0000000
> +fdtaddr=0xb0000000
> +dp_file=ls1028a-dp-fw.bin
> +dp_load=0x90000000
> +dp_offset=0x2000
> +stderr=serial
> +stdin=serial
> +stdout=serial
> +rollbackboot=setenv bootargs root=/dev/ram0 rootwait rw earlycon=uart8250,0x21c0500 console=ttyS0,115200;mmcinfo;fatload mmc 0:1 ${loadaddr} ${bootfile};bootm ${loadaddr}
What does "rollbackboot" do?
> diff --git a/board/nxp/ls1028ardb/u-boot-environment-sd.txt b/board/nxp/ls1028ardb/u-boot-environment-sd.txt
> new file mode 100644
> index 0000000000..820989280f
> --- /dev/null
> +++ b/board/nxp/ls1028ardb/u-boot-environment-sd.txt
> @@ -0,0 +1,21 @@
> +baudrate=115200
> +bootcmd=setenv bootargs root=/dev/mmcblk0p2 rootwait rw earlycon=uart8250,0x21c0500 console=ttyS0,115200 cma=256M video=1920x1080-32 at 60;mmcinfo;fatload mmc 0:1 ${dp_load} ${dp_file}; hdp load ${dp_load} ${dp_offset};fatload mmc 0:1 ${loadaddr} ${bootfile};fatload mmc 0:1 ${fdtaddr} ${fdtfile};booti ${loadaddr} - ${fdtaddr}
> +bootdelay=3
> +bootfile=Image
> +fdtfile=fsl-ls1028a-rdb.dtb
> +eth2addr=00:1F:7B:63:35:E9
> +ethact=FM1 at DTSEC3
> +ethprime=FM1 at DTSEC3
> +fdt_high=0xffffffffffffffff
> +fdtcontroladdr=ffc01550
> +fman_ucode=ffc12090
> +hwconfig=fsl_ddr:bank_intlv=auto
> +initrd_high=0xffffffffffffffff
> +loadaddr=0xa0000000
> +fdtaddr=0xb0000000
> +dp_file=ls1028a-dp-fw.bin
> +dp_load=0x90000000
> +dp_offset=0x2000
> +stderr=serial
> +stdin=serial
> +stdout=serial
> diff --git a/board/nxp/ls1028ardb/u-boot-environment-xspi.txt b/board/nxp/ls1028ardb/u-boot-environment-xspi.txt
> new file mode 100644
> index 0000000000..5677cdddaa
> --- /dev/null
> +++ b/board/nxp/ls1028ardb/u-boot-environment-xspi.txt
> @@ -0,0 +1,22 @@
> +baudrate=115200
> +bootcmd=setenv bootargs root=/dev/ram0 rw earlycon=uart8250,0x21c0500 console=ttyS0,115200 cma=256M video=1920x1080-32 at 60; sf probe 0:0; sf read $dp_load $dp_start $dp_size; hdp load $dp_load $dp_offset; sf read $kernel_load $kernel_start $kernel_size && bootm $kernel_load
> +bootdelay=3
> +eth2addr=00:1F:7B:63:35:E9
> +ethact=FM1 at DTSEC3
> +ethprime=FM1 at DTSEC3
> +fdt_high=0xffffffffffffffff
> +fdtcontroladdr=ffc01550
> +fman_ucode=ffc12090
> +hwconfig=fsl_ddr:bank_intlv=auto
> +initrd_high=0xffffffffffffffff
> +kernel_load=0xa0000000
> +kernel_size=0x3000000
> +kernel_start=0x1000000
> +dp_load=0x90000000
> +dp_start=0x940000
> +dp_size=0x40000
> +dp_offset=0x2000
> +stderr=serial
> +stdin=serial
> +stdout=serial
> +rollbackboot=setenv bootargs root=/dev/ram0 rootwait rw earlycon=uart8250,0x21c0500 console=ttyS0,115200;mmcinfo;fatload mmc 0:1 ${loadaddr} ${bootfile};bootm $loadaddr
> diff --git a/configs/nxp_ls1028ardb-64b-emmc_defconfig b/configs/nxp_ls1028ardb-64b-emmc_defconfig
> new file mode 100644
> index 0000000000..019889f5e0
> --- /dev/null
> +++ b/configs/nxp_ls1028ardb-64b-emmc_defconfig
Thomas, is there any way in Buildroot to use fragments for the board
configs, to avoid duplication? I couldn't find any way.
> @@ -0,0 +1,85 @@
> +# Architecture
> +BR2_aarch64=y
> +BR2_cortex_a72=y
> +
> +# Filesystem
> +BR2_TARGET_ROOTFS_EXT2=y
> +BR2_TARGET_ROOTFS_EXT2_4=y
> +
> +# Hostname and issue
> +BR2_TARGET_GENERIC_HOSTNAME="LS1028ARDB"
> +
> +# toolchain
> +BR2_TOOLCHAIN_BUILDROOT_GLIBC=y
> +BR2_TOOLCHAIN_BUILDROOT_LIBC="glibc"
> +
> +# Linux headers same as kernel
> +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_19=y
> +
> +# bootloader
> +BR2_TARGET_UBOOT=y
> +BR2_TARGET_UBOOT_FORMAT_DTB_BIN=y
> +BR2_TARGET_UBOOT_BOARDNAME="ls1028ardb_tfa"
> +BR2_TARGET_UBOOT_CUSTOM_GIT=y
> +BR2_TARGET_UBOOT_CUSTOM_REPO_URL="https://source.codeaurora.org/external/qoriq/qoriq-components/u-boot"
> +BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="LSDK-19.09"
> +BR2_TARGET_UBOOT_NEEDS_DTC=y
> +BR2_TARGET_UBOOT_FORMAT_BIN=n
> +BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
> +BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot-dtb.bin"
> +BR2_PACKAGE_UBOOT_TOOLS_MKIMAGE=y
> +BR2_TARGET_UBOOT_ENVIMAGE=y
> +BR2_TARGET_UBOOT_ENVIMAGE_SOURCE="board/nxp/ls1028ardb/u-boot-environment-emmc.txt"
> +BR2_TARGET_UBOOT_ENVIMAGE_SIZE="0x2000"
> +
> +# Kernel
> +BR2_LINUX_KERNEL=y
> +BR2_LINUX_KERNEL_CUSTOM_GIT=y
> +BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://source.codeaurora.org/external/qoriq/qoriq-components/linux"
> +BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="LSDK-19.09-V4.19"
> +BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y
> +BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(LINUX_DIR)/arch/arm64/configs/lsdk.config"
> +BR2_LINUX_KERNEL_DTS_SUPPORT=y
> +BR2_LINUX_KERNEL_INTREE_DTS_NAME="freescale/fsl-ls1028a-rdb"
> +BR2_LINUX_KERNEL_IMAGE_TARGET_CUSTOM=y
> +BR2_LINUX_KERNEL_IMAGE_TARGET_NAME="Image"
> +
> +# Serial port config
> +BR2_TARGET_GENERIC_GETTY=y
> +BR2_TARGET_GENERIC_GETTY_PORT="ttyS0"
> +
> +# required tools to create the microSD image
> +BR2_PACKAGE_HOST_DOSFSTOOLS=y
> +BR2_PACKAGE_HOST_GENIMAGE=y
> +BR2_PACKAGE_HOST_MTOOLS=y
> +BR2_ROOTFS_POST_IMAGE_SCRIPT="board/nxp/common/ls/post-image.sh"
> +BR2_ROOTFS_POST_SCRIPT_ARGS="$(LINUX_DIR) $(TOPDIR) $(UBOOT_DIR)"
> +
> +# busybox setting
> +BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y
> +
> +# packages for rcw
> +BR2_PACKAGE_HOST_QORIQ_RCW=y
> +BR2_PACKAGE_HOST_QORIQ_RCW_BOOT_MODE="emmc"
> +BR2_PACKAGE_HOST_QORIQ_RCW_BIN="ls1028ardb/R_SQPP_0x85bb/rcw_1300_emmcboot.bin"
> +
> +#Display port firmware
> +BR2_PACKAGE_QORIQ_CADENCE_DP_FIRMWARE=y
> +
> +#eudev support
> +BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y
> +BR2_ROOTFS_POST_BUILD_SCRIPT="board/nxp/ls1028ardb/post-cfg-udev.sh"
> +
> +# Arm-Trusted-Firmware
> +BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
> +BR2_TARGET_ARM_TRUSTED_FIRMWARE_FIP=y
> +BR2_TARGET_ARM_TRUSTED_FIRMWARE_UBOOT_AS_BL33=y
> +BR2_TARGET_ARM_TRUSTED_FIRMWARE_UBOOT_BL33_IMAGE="u-boot-dtb.bin"
> +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_GIT=y
> +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_URL="https://source.codeaurora.org/external/qoriq/qoriq-components/atf"
> +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_VERSION="LSDK-19.09"
> +BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="ls1028ardb"
> +BR2_TARGET_ARM_TRUSTED_FIRMWARE_IMAGES="fip.bin bl2_emmc.pbl"
> +BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_TARGETS="pbl"
> +BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_DEPENDENCIES="host-qoriq-rcw"
> +BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_VARIABLES="BOOT_MODE=emmc RCW=$(BINARIES_DIR)/rcw_1300_emmcboot.bin"
> diff --git a/configs/nxp_ls1028ardb-64b-xspi_defconfig b/configs/nxp_ls1028ardb-64b-xspi_defconfig
> new file mode 100644
> index 0000000000..66241c4c79
> --- /dev/null
> +++ b/configs/nxp_ls1028ardb-64b-xspi_defconfig
> @@ -0,0 +1,85 @@
> +# Architecture
> +BR2_aarch64=y
> +BR2_cortex_a72=y
> +
> +# Filesystem
> +BR2_TARGET_ROOTFS_CPIO=y
> +BR2_TARGET_ROOTFS_CPIO_GZIP=y
> +BR2_TARGET_ROOTFS_CPIO_UIMAGE=y
> +
> +# Hostname and issue
> +BR2_TARGET_GENERIC_HOSTNAME="LS1028ARDB"
> +
> +# toolchain
> +BR2_TOOLCHAIN_BUILDROOT_GLIBC=y
> +BR2_TOOLCHAIN_BUILDROOT_LIBC="glibc"
> +
> +# Linux headers same as kernel
> +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_19=y
> +
> +# bootloader
> +BR2_TARGET_UBOOT=y
> +BR2_TARGET_UBOOT_BOARDNAME="ls1028ardb_tfa"
> +BR2_TARGET_UBOOT_CUSTOM_GIT=y
> +BR2_TARGET_UBOOT_CUSTOM_REPO_URL="https://source.codeaurora.org/external/qoriq/qoriq-components/u-boot"
> +BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="LSDK-19.09"
> +BR2_TARGET_UBOOT_NEEDS_DTC=y
> +BR2_TARGET_UBOOT_FORMAT_BIN=n
> +BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
> +BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot-dtb.bin"
> +BR2_TARGET_UBOOT_ENVIMAGE=y
> +BR2_TARGET_UBOOT_ENVIMAGE_SOURCE="board/nxp/ls1028ardb/u-boot-environment-xspi.txt"
> +BR2_TARGET_UBOOT_ENVIMAGE_SIZE="0x2000"
> +
> +# Kernel
> +BR2_LINUX_KERNEL=y
> +BR2_LINUX_KERNEL_CUSTOM_GIT=y
> +BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://source.codeaurora.org/external/qoriq/qoriq-components/linux"
> +BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="LSDK-19.09-V4.19"
> +BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y
> +BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(LINUX_DIR)/arch/arm64/configs/lsdk.config"
> +BR2_LINUX_KERNEL_DTS_SUPPORT=y
> +BR2_LINUX_KERNEL_INTREE_DTS_NAME="freescale/fsl-ls1028a-rdb"
> +BR2_LINUX_KERNEL_IMAGE_TARGET_CUSTOM=y
> +BR2_LINUX_KERNEL_IMAGE_TARGET_NAME="Image.gz"
> +
> +# Serial port config
> +BR2_TARGET_GENERIC_GETTY=y
> +BR2_TARGET_GENERIC_GETTY_PORT="ttyS0"
> +
> +# required tools to create the microSD image
> +BR2_PACKAGE_HOST_DOSFSTOOLS=y
> +BR2_PACKAGE_HOST_GENIMAGE=y
> +BR2_PACKAGE_HOST_MTOOLS=y
> +BR2_ROOTFS_POST_IMAGE_SCRIPT="board/nxp/common/ls/post-image-spi.sh"
> +BR2_ROOTFS_POST_SCRIPT_ARGS="$(LINUX_DIR) $(TOPDIR) $(UBOOT_DIR)"
> +
> +# busybox setting
> +BR2_PACKAGE_BUSYBOX_CONFIG_FRAGMENT_FILES="board/nxp/common/ls/busybox.config"
> +BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y
> +
> +# packages for rcw
> +BR2_PACKAGE_HOST_QORIQ_RCW=y
> +BR2_PACKAGE_HOST_QORIQ_RCW_BOOT_MODE="flexspi_nor"
> +BR2_PACKAGE_HOST_QORIQ_RCW_BIN="ls1028ardb/R_SQPP_0x85bb/rcw_1500_gpu600.bin"
> +
> +#Display port firmware
> +BR2_PACKAGE_QORIQ_CADENCE_DP_FIRMWARE=y
> +
> +#eudev support
> +BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y
> +BR2_ROOTFS_POST_BUILD_SCRIPT="board/nxp/ls1028ardb/post-cfg-udev.sh"
> +
> +# Arm-Trusted-Firmware
> +BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
> +BR2_TARGET_ARM_TRUSTED_FIRMWARE_FIP=y
> +BR2_TARGET_ARM_TRUSTED_FIRMWARE_UBOOT_AS_BL33=y
> +BR2_TARGET_ARM_TRUSTED_FIRMWARE_UBOOT_BL33_IMAGE="u-boot-dtb.bin"
> +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_GIT=y
> +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_URL="https://source.codeaurora.org/external/qoriq/qoriq-components/atf"
> +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_VERSION="LSDK-19.09"
> +BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="ls1028ardb"
> +BR2_TARGET_ARM_TRUSTED_FIRMWARE_IMAGES="fip.bin bl2_flexspi_nor.pbl"
> +BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_TARGETS="pbl"
> +BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_DEPENDENCIES="host-qoriq-rcw"
> +BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_VARIABLES="BOOT_MODE=flexspi_nor RCW=$(BINARIES_DIR)/rcw_1500_gpu600.bin"
> diff --git a/configs/nxp_ls1028ardb-64b_defconfig b/configs/nxp_ls1028ardb-64b_defconfig
> new file mode 100644
> index 0000000000..fdb251058f
> --- /dev/null
> +++ b/configs/nxp_ls1028ardb-64b_defconfig
> @@ -0,0 +1,85 @@
> +# Architecture
> +BR2_aarch64=y
> +BR2_cortex_a72=y
> +
> +# Filesystem
> +BR2_TARGET_ROOTFS_EXT2=y
> +BR2_TARGET_ROOTFS_EXT2_4=y
> +
> +# Hostname and issue
> +BR2_TARGET_GENERIC_HOSTNAME="LS1028ARDB"
> +
> +# toolchain
> +BR2_TOOLCHAIN_BUILDROOT_GLIBC=y
> +BR2_TOOLCHAIN_BUILDROOT_LIBC="glibc"
> +
> +# Linux headers same as kernel
> +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_19=y
> +
> +# bootloader
> +BR2_TARGET_UBOOT=y
> +BR2_TARGET_UBOOT_BOARDNAME="ls1028ardb_tfa"
> +BR2_TARGET_UBOOT_CUSTOM_GIT=y
> +BR2_TARGET_UBOOT_CUSTOM_REPO_URL="https://source.codeaurora.org/external/qoriq/qoriq-components/u-boot"
> +BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="LSDK-19.09"
> +BR2_TARGET_UBOOT_NEEDS_DTC=y
> +BR2_TARGET_UBOOT_FORMAT_BIN=n
> +BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
> +BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot-dtb.bin"
> +BR2_PACKAGE_UBOOT_TOOLS_MKIMAGE=y
> +BR2_TARGET_UBOOT_ENVIMAGE=y
> +BR2_TARGET_UBOOT_ENVIMAGE_SOURCE="board/nxp/ls1028ardb/u-boot-environment-sd.txt"
> +BR2_TARGET_UBOOT_ENVIMAGE_SIZE="0x2000"
> +
> +# Kernel
> +BR2_LINUX_KERNEL=y
> +BR2_LINUX_KERNEL_CUSTOM_GIT=y
> +BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://source.codeaurora.org/external/qoriq/qoriq-components/linux"
> +BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="LSDK-19.09-V4.19"
> +BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y
> +BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(LINUX_DIR)/arch/arm64/configs/lsdk.config"
> +BR2_LINUX_KERNEL_DTS_SUPPORT=y
> +BR2_LINUX_KERNEL_INTREE_DTS_NAME="freescale/fsl-ls1028a-rdb"
> +BR2_LINUX_KERNEL_IMAGE_TARGET_CUSTOM=y
> +BR2_LINUX_KERNEL_IMAGE_TARGET_NAME="Image"
> +
> +# Serial port config
> +BR2_TARGET_GENERIC_GETTY=y
> +BR2_TARGET_GENERIC_GETTY_PORT="ttyS0"
> +
> +# required tools to create the microSD image
> +BR2_PACKAGE_HOST_DOSFSTOOLS=y
> +BR2_PACKAGE_HOST_GENIMAGE=y
> +BR2_PACKAGE_HOST_MTOOLS=y
> +BR2_ROOTFS_POST_IMAGE_SCRIPT="board/nxp/common/ls/post-image.sh"
> +BR2_ROOTFS_POST_SCRIPT_ARGS="$(LINUX_DIR) $(TOPDIR) $(UBOOT_DIR)"
> +
> +# busybox setting
> +BR2_PACKAGE_BUSYBOX_CONFIG_FRAGMENT_FILES="board/nxp/common/ls/busybox.config"
> +BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y
> +
> +# packages for rcw
> +BR2_PACKAGE_HOST_QORIQ_RCW=y
> +BR2_PACKAGE_HOST_QORIQ_RCW_BOOT_MODE="sd"
> +BR2_PACKAGE_HOST_QORIQ_RCW_BIN="ls1028ardb/R_SQPP_0x85bb/rcw_1300_sdboot.bin"
> +
> +#Display port firmware
> +BR2_PACKAGE_QORIQ_CADENCE_DP_FIRMWARE=y
> +
> +#eudev support
> +BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y
> +BR2_ROOTFS_POST_BUILD_SCRIPT="board/nxp/ls1028ardb/post-cfg-udev.sh"
> +
> +# Arm-Trusted-Firmware
> +BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
> +BR2_TARGET_ARM_TRUSTED_FIRMWARE_FIP=y
> +BR2_TARGET_ARM_TRUSTED_FIRMWARE_UBOOT_AS_BL33=y
> +BR2_TARGET_ARM_TRUSTED_FIRMWARE_UBOOT_BL33_IMAGE="u-boot-dtb.bin"
> +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_GIT=y
> +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_URL="https://source.codeaurora.org/external/qoriq/qoriq-components/atf"
> +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_VERSION="LSDK-19.09"
> +BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="ls1028ardb"
> +BR2_TARGET_ARM_TRUSTED_FIRMWARE_IMAGES="fip.bin bl2_sd.pbl"
> +BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_TARGETS="pbl"
> +BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_DEPENDENCIES="host-qoriq-rcw"
> +BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_VARIABLES="BOOT_MODE=sd RCW=$(BINARIES_DIR)/rcw_1300_sdboot.bin"
> --
> 2.17.1
>
> _______________________________________________
> buildroot mailing list
> buildroot at busybox.net
> http://lists.busybox.net/mailman/listinfo/buildroot
Thanks,
-Vladimir
More information about the buildroot
mailing list