[Buildroot] [PATCH 1/1] board/freescale/common/imx: use nodtb variant in uboot images for 8M
Julien Olivain
juju at cotds.org
Mon Dec 2 20:03:33 UTC 2019
When using u-boot.bin, u-boot is using its builtin dtb which may not
be suitable for all cases. For TechNexion Pico Pi i.MX8M and
i.MX8MMini, this break the USB and UMS commands. Since those boards
does not have SD card slots, a recovery serial download is needed at
every update.
Using u-boot-nodtb.bin now fixes this issue.
Signed-off-by: Julien Olivain <juju at cotds.org>
---
board/freescale/common/imx/imx8-bootloader-prepare.sh | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/board/freescale/common/imx/imx8-bootloader-prepare.sh b/board/freescale/common/imx/imx8-bootloader-prepare.sh
index df528b0df5..cbf741af30 100755
--- a/board/freescale/common/imx/imx8-bootloader-prepare.sh
+++ b/board/freescale/common/imx/imx8-bootloader-prepare.sh
@@ -10,14 +10,14 @@ main ()
if grep -Eq "^BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8M=y$" ${BR2_CONFIG}; then
cat ${BINARIES_DIR}/u-boot-spl.bin ${BINARIES_DIR}/lpddr4_pmu_train_fw.bin > ${BINARIES_DIR}/u-boot-spl-ddr.bin
- BL31=${BINARIES_DIR}/bl31.bin BL33=${BINARIES_DIR}/u-boot.bin ATF_LOAD_ADDR=0x00910000 ${HOST_DIR}/bin/mkimage_fit_atf.sh ${UBOOT_DTB} > ${BINARIES_DIR}/u-boot.its
+ BL31=${BINARIES_DIR}/bl31.bin BL33=${BINARIES_DIR}/u-boot-nodtb.bin ATF_LOAD_ADDR=0x00910000 ${HOST_DIR}/bin/mkimage_fit_atf.sh ${UBOOT_DTB} > ${BINARIES_DIR}/u-boot.its
${HOST_DIR}/bin/mkimage -E -p 0x3000 -f ${BINARIES_DIR}/u-boot.its ${BINARIES_DIR}/u-boot.itb
rm -f ${BINARIES_DIR}/u-boot.its
${HOST_DIR}/bin/mkimage_imx8 -fit -signed_hdmi ${BINARIES_DIR}/signed_hdmi_imx8m.bin -loader ${BINARIES_DIR}/u-boot-spl-ddr.bin 0x7E1000 -second_loader ${BINARIES_DIR}/u-boot.itb 0x40200000 0x60000 -out ${BINARIES_DIR}/imx8-boot-sd.bin
elif grep -Eq "^BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8MM=y$" ${BR2_CONFIG}; then
cat ${BINARIES_DIR}/u-boot-spl.bin ${BINARIES_DIR}/lpddr4_pmu_train_fw.bin > ${BINARIES_DIR}/u-boot-spl-ddr.bin
- BL31=${BINARIES_DIR}/bl31.bin BL33=${BINARIES_DIR}/u-boot.bin ATF_LOAD_ADDR=0x00920000 ${HOST_DIR}/bin/mkimage_fit_atf.sh ${UBOOT_DTB} > ${BINARIES_DIR}/u-boot.its
+ BL31=${BINARIES_DIR}/bl31.bin BL33=${BINARIES_DIR}/u-boot-nodtb.bin ATF_LOAD_ADDR=0x00920000 ${HOST_DIR}/bin/mkimage_fit_atf.sh ${UBOOT_DTB} > ${BINARIES_DIR}/u-boot.its
${HOST_DIR}/bin/mkimage -E -p 0x3000 -f ${BINARIES_DIR}/u-boot.its ${BINARIES_DIR}/u-boot.itb
rm -f ${BINARIES_DIR}/u-boot.its
--
2.23.0
More information about the buildroot
mailing list