[Buildroot] [PATCH 1/1] configs: add raspberrypi4 64bits defconfig

Arthur COURTEL arthur.courtel at smile.fr
Mon Dec 2 12:46:11 UTC 2019


Hi Romain,
I took the --add-pi3-miniuart-bt-overlay option from the RPI 4 defconfig. I
don't know well enough DTS mechanism to tell if this overlay is needed by
the rpi4 DTS.
If someone can look at it ?
I don't have the board to test without today but I'll test test as soon as
I can.
i will send proper defconfig as soon as we know about bt overlay option.

Best regards,
Arthur


On Fri, Nov 29, 2019 at 6:43 PM Romain Naour <romain.naour at smile.fr> wrote:

> Hi Arthur,
>
> Le 29/11/2019 à 17:02, Arthur Courtel a écrit :
> > This configuration builds a 64bit image for RaspberryPi 4.
> >
> > Signed-off-by: Arthur Courtel <arthur.courtel at smile.fr>
> > ---
> >  .../raspberrypi/genimage-raspberrypi4-64.cfg  | 30 +++++++++++++++++++
> >  board/raspberrypi/post-image.sh               |  4 +--
> >  board/raspberrypi4-64                         |  1 +
> >  configs/raspberrypi4_64_defconfig             | 24 +++++++++++++++
> >  4 files changed, 57 insertions(+), 2 deletions(-)
> >  create mode 100644 board/raspberrypi/genimage-raspberrypi4-64.cfg
> >  create mode 120000 board/raspberrypi4-64
> >  create mode 100644 configs/raspberrypi4_64_defconfig
> >
> > diff --git a/board/raspberrypi/genimage-raspberrypi4-64.cfg
> b/board/raspberrypi/genimage-raspberrypi4-64.cfg
> > new file mode 100644
> > index 0000000000..3c480e98f0
> > --- /dev/null
> > +++ b/board/raspberrypi/genimage-raspberrypi4-64.cfg
> > @@ -0,0 +1,30 @@
> > +image boot.vfat {
> > +  vfat {
> > +    files = {
> > +      "bcm2711-rpi-4-b.dtb",
> > +      "rpi-firmware/cmdline.txt",
> > +      "rpi-firmware/config.txt",
> > +      "rpi-firmware/fixup4.dat",
> > +      "rpi-firmware/start4.elf",
> > +      "rpi-firmware/overlays",
> > +      "Image"
>
> Not related to your patch but the raspberry-pi3 defconfig use zImage but
> the
> 64bit version use Image.
>
> Any reason for this?
>
> > +    }
> > +  }
> > +  size = 32M
> > +}
> > +
> > +image sdcard.img {
> > +  hdimage {
> > +  }
> > +
> > +  partition boot {
> > +    partition-type = 0xC
> > +    bootable = "true"
> > +    image = "boot.vfat"
> > +  }
> > +
> > +  partition rootfs {
> > +    partition-type = 0x83
> > +    image = "rootfs.ext4"
> > +  }
> > +}
> > diff --git a/board/raspberrypi/post-image.sh
> b/board/raspberrypi/post-image.sh
> > index bf9af5dc60..e79141f142 100755
> > --- a/board/raspberrypi/post-image.sh
> > +++ b/board/raspberrypi/post-image.sh
> > @@ -15,7 +15,7 @@ do
> >                       echo "Adding 'dtoverlay=pi3-miniuart-bt' to
> config.txt (fixes ttyAMA0 serial console)."
> >                       cat << __EOF__ >>
> "${BINARIES_DIR}/rpi-firmware/config.txt"
> >
> > -# fixes rpi3 ttyAMA0 serial console
> > +# fixes rpi3/4 ttyAMA0 serial console
>
> Are you sure that is the same devicetree overlay for rpi3 and rpi4 ?
>
> The option is rpi3 specific (--add-pi3-miniuart-bt-overlay).
>
> >  dtoverlay=pi3-miniuart-bt
> >  __EOF__
> >               fi
> > @@ -35,7 +35,7 @@ __EOF__
> >               if ! grep -qE '^enable_uart=1'
> "${BINARIES_DIR}/rpi-firmware/config.txt"; then
> >                       cat << __EOF__ >>
> "${BINARIES_DIR}/rpi-firmware/config.txt"
> >
> > -# enable rpi3 ttyS0 serial console
> > +# enable rpi3/4 ttyS0 serial console
> >  enable_uart=1
> >  __EOF__
> >               fi
> > diff --git a/board/raspberrypi4-64 b/board/raspberrypi4-64
> > new file mode 120000
> > index 0000000000..fcdafc81ed
> > --- /dev/null
> > +++ b/board/raspberrypi4-64
> > @@ -0,0 +1 @@
> > +raspberrypi
> > \ No newline at end of file
> > diff --git a/configs/raspberrypi4_64_defconfig
> b/configs/raspberrypi4_64_defconfig
> > new file mode 100644
> > index 0000000000..3d30fb05f5
> > --- /dev/null
> > +++ b/configs/raspberrypi4_64_defconfig
> > @@ -0,0 +1,24 @@
> > +BR2_aarch64=y
> > +BR2_cortex_a72=y
> > +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_19=y
> > +BR2_TOOLCHAIN_BUILDROOT_CXX=y
> > +BR2_SYSTEM_DHCP="eth0"
> > +BR2_ROOTFS_POST_BUILD_SCRIPT="board/raspberrypi4-64/post-build.sh"
> > +BR2_ROOTFS_POST_IMAGE_SCRIPT="board/raspberrypi4-64/post-image.sh"
> > +BR2_ROOTFS_POST_SCRIPT_ARGS="--add-pi3-miniuart-bt-overlay --aarch64"
> > +BR2_LINUX_KERNEL=y
> > +BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
> > +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call
> github,raspberrypi,linux,raspberrypi-kernel_1.20190819-1)/linux-raspberrypi-kernel_1.20190819-1.tar.gz"
> > +BR2_LINUX_KERNEL_DEFCONFIG="bcm2711"
> > +BR2_LINUX_KERNEL_DTS_SUPPORT=y
> > +BR2_LINUX_KERNEL_INTREE_DTS_NAME="broadcom/bcm2711-rpi-4-b"
> > +BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
> > +BR2_PACKAGE_RPI_FIRMWARE=y
> > +BR2_PACKAGE_RPI_FIRMWARE_VARIANT_PI4=y
> > +BR2_TARGET_ROOTFS_EXT2=y
> > +BR2_TARGET_ROOTFS_EXT2_4=y
> > +BR2_TARGET_ROOTFS_EXT2_SIZE="120M"
> > +# BR2_TARGET_ROOTFS_TAR is not set
> > +BR2_PACKAGE_HOST_DOSFSTOOLS=y
> > +BR2_PACKAGE_HOST_GENIMAGE=y
> > +BR2_PACKAGE_HOST_MTOOLS=y
>
> We use generally a hand written defconfig file to add some comments, see
> [1].
>
> [1]
> https://git.buildroot.net/buildroot/tree/configs/raspberrypi4_defconfig
>
> Best regards,
> Romain
>
>
>

-- 
<http://www.smile.eu/>
*Arthur COURTEL*
Ingénieur Etude et Développement

[image: email] arthur.courtel at smile.fr

[image: eco] Pour la planète, n'imprimez ce mail que si c'est nécessaire
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20191202/3b5ffa89/attachment.html>


More information about the buildroot mailing list