[Buildroot] [PATCHv2] sgp30: New kernel module package
David
david at ledav.net
Sat Aug 3 22:21:40 UTC 2019
Hi Peter,
Not anymore. I sent that patch 8 months ago... In the meantime, it was
indeed added so.
Just forget about this patch and keep using the mainline.
Thanks.
Regards,
David.
On 03/08/2019 16:33, Peter Korsgaard wrote:
>>>>>> "Yann" == Yann E MORIN <yann.morin.1998 at free.fr> writes:
>
> > From: David De Grave <david at ledav.net>
> > Kernel module for the Sensirion sgp30 / sgpc2 chemical sensors.
>
> > Signed-off-by: David De Grave <david at ledav.net>
> > [yann.morin.1998 at free.fr:
> > - fix coding style after check-package
> > - enable required linux options
> > ]
> > Signed-off-by: Yann E. MORIN <yann.morin.1998 at free.fr>
>
> > ---
> > Changes v1 -> v2 (Yann):
> > - fix coding style with check-package
> > - enable the required linux options
> > ---
> > linux/linux.mk | 3 +++
> > package/Config.in | 1 +
> > package/sgp30/Config.in | 13 +++++++++++++
> > package/sgp30/sgp30.hash | 1 +
> > package/sgp30/sgp30.mk | 18 ++++++++++++++++++
>
> A DEVELOPERS entry is missing.
>
> I see the kernel now has a sgp30 driver since 5.1, is there any reason
> to use this over the mainline driver?
>
> Author: Andreas Brauchli <a.brauchli at elementarea.net>
> Date: Thu Dec 13 15:43:23 2018 +0100
>
> iio: chemical: sgp30: Support Sensirion SGP30/SGPC3 sensors
>
> Support Sensirion SGP30 and SGPC3 multi-pixel I2C gas sensors
>
> Supported Features:
>
> * Indoor Air Quality (IAQ) concentrations for
> - tVOC (in_concentration_voc_input)
> - CO2eq (in_concentration_co2_input) - SGP30 only
>
> IAQ concentrations are periodically read out by a background
> thread
> to allow the sensor to maintain its internal baseline.
>
> * Gas concentration signals
> - Ethanol (in_concentration_ethanol_raw)
> - H2 (in_concentration_h2_raw) - SGP30 only
>
> https://www.sensirion.com/file/datasheet_sgp30
> https://www.sensirion.com/file/datasheet_sgpc3
>
> Signed-off-by: Andreas Brauchli <andreas.brauchli at sensirion.com>
> Signed-off-by: Jonathan Cameron <Jonathan.Cameron at huawei.com>
More information about the buildroot
mailing list