[Buildroot] [PATCH 1/2] configs/freescale_t2080_qds_rdb_defconfig: new board

Arnout Vandecappelle arnout at mind.be
Wed Apr 17 20:51:08 UTC 2019



On 16/08/2018 20:01, Matt Weber wrote:
> The board is setup to track upstream Linux as the official
> vendor support was complete(depricated) at 4.1 via NXP SDKs.
> 
> The target does not build uboot and assumes the user still uses the NXP
> suggested prebuilts in the SDK2.0 (last release for PowerPC). If a
> uboot is required, the source for SDK2.0 can be found in the following
> repo.
> http://git.freescale.com/git/cgit.cgi/ppc/sdk/u-boot.git/tag/?id=fsl-sdk-v2.0-1703
> 
> Signed-off-by: Matthew Weber <matthew.weber at rockwellcollins.com>

 Both (finally) applied to master, thanks.

 It would be nice if you could bump the kernel (and also t1040's) to something
more recent.

 Regards,
 Arnout

> ---
> 
> DEVELOPERS already covers my entry with a wildcard catching this one
> configs/freescale_t*
> ---
>  configs/freescale_t2080_qds_rdb_defconfig | 25 +++++++++++++++++++++++
>  1 file changed, 25 insertions(+)
>  create mode 100644 configs/freescale_t2080_qds_rdb_defconfig
> 
> diff --git a/configs/freescale_t2080_qds_rdb_defconfig b/configs/freescale_t2080_qds_rdb_defconfig
> new file mode 100644
> index 0000000000..3d03c32f7e
> --- /dev/null
> +++ b/configs/freescale_t2080_qds_rdb_defconfig
> @@ -0,0 +1,25 @@
> +# Architecture
> +BR2_powerpc64=y
> +BR2_powerpc_e6500=y
> +
> +# Linux headers same as kernel
> +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_17=y
> +
> +# Serial port config
> +BR2_TARGET_GENERIC_GETTY_PORT="ttyS0"
> +
> +# Kernel
> +BR2_LINUX_KERNEL=y
> +BR2_LINUX_KERNEL_CUSTOM_VERSION=y
> +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.17.14"
> +BR2_LINUX_KERNEL_DEFCONFIG="corenet64_smp"
> +BR2_LINUX_KERNEL_DTS_SUPPORT=y
> +BR2_LINUX_KERNEL_INTREE_DTS_NAME="fsl/t2080qds fsl/t2080rdb"
> +BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
> +
> +# Filesystem
> +BR2_TARGET_ROOTFS_CPIO=y
> +BR2_TARGET_ROOTFS_CPIO_GZIP=y
> +BR2_TARGET_ROOTFS_CPIO_UIMAGE=y
> +# BR2_TARGET_ROOTFS_TAR is not set
> +
> 


More information about the buildroot mailing list