[Buildroot] Problems with the package wget version 1.19.5

[Oscar Gomez Fuente]

Hi Peter,

Thank you in advanced for your help.

> Please post your .config/defconfig file (with the bare raspberrypi3_defconfig
> wget is disabled because of the BR2_USE_WCHAR dependency (and BR2_PACKAGE_BUSYBOX_SHOW_OTHERS))?

BR2_arm=y
BR2_cortex_a53=y
BR2_ARM_FPU_NEON_VFPV4=y
BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_14=y
BR2_TOOLCHAIN_BUILDROOT_WCHAR=y
BR2_TOOLCHAIN_BUILDROOT_CXX=y
BR2_TARGET_GENERIC_HOSTNAME="tstpi"
BR2_TARGET_GENERIC_ISSUE="Welcome to Buildroot 2018.02.5 by TST"
BR2_TARGET_GENERIC_PASSWD_SHA512=y
BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y
BR2_TARGET_GENERIC_ROOT_PASSWD="tstpi"
BR2_SYSTEM_BIN_SH_BASH=y
BR2_TARGET_GENERIC_GETTY_PORT="ttyAMA0"
BR2_TARGET_GENERIC_GETTY_BAUDRATE_115200=y
BR2_SYSTEM_DHCP="eth0"
# BR2_ENABLE_LOCALE_PURGE is not set
BR2_ROOTFS_POST_BUILD_SCRIPT="$(TOPDIR)/board/tst/tstpi/post-build-tstpi-3b.sh"
BR2_ROOTFS_POST_IMAGE_SCRIPT="$(TOPDIR)/board/tst/tstpi/post-image.sh"
BR2_ROOTFS_POST_SCRIPT_ARGS="tstpi-3p-pc --serial --ext-mon-wifi --bt"
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_GIT=y
BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/raspberrypi/linux.git"
BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="865ddc1393f558198e7e7ce70928ff2e49c4f7f6"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="$(TOPDIR)/board/tst/tstpi/linux-config/linux-tstpi-3b-pc.config"
BR2_LINUX_KERNEL_DTS_SUPPORT=y
BR2_LINUX_KERNEL_INTREE_DTS_NAME="bcm2710-rpi-3-b bcm2710-rpi-3-b-plus
bcm2710-rpi-cm3"
BR2_PACKAGE_LINUX_TOOLS_CPUPOWER=y
BR2_PACKAGE_LINUX_TOOLS_GPIO=y
BR2_PACKAGE_LINUX_TOOLS_TMON=y
BR2_PACKAGE_BUSYBOX_CONFIG="$(TOPDIR)/board/tst/tstpi/busybox-config/busybox-tstpi-pc.config"
BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y
BR2_PACKAGE_BUSYBOX_WATCHDOG=y
BR2_PACKAGE_CHECK=y
BR2_PACKAGE_RPI_BT_FIRMWARE=y
BR2_PACKAGE_RPI_FIRMWARE=y
BR2_PACKAGE_RPI_WIFI_FIRMWARE=y
BR2_PACKAGE_I2C_TOOLS=y
BR2_PACKAGE_SPI_TOOLS=y
BR2_PACKAGE_PYTHON3=y
BR2_PACKAGE_PYTHON3_CURSES=y
BR2_PACKAGE_PYTHON_SMBUS_CFFI=y
BR2_PACKAGE_LIBSNDFILE=y
BR2_PACKAGE_LIBUSB=y
BR2_PACKAGE_WIRINGPI=y
BR2_PACKAGE_BC=y
BR2_PACKAGE_AIRCRACK_NG=y
BR2_PACKAGE_BLUEZ_TOOLS=y
BR2_PACKAGE_BLUEZ5_UTILS=y
BR2_PACKAGE_BLUEZ5_UTILS_OBEX=y
BR2_PACKAGE_BLUEZ5_UTILS_CLIENT=y
BR2_PACKAGE_BLUEZ5_UTILS_EXPERIMENTAL=y
BR2_PACKAGE_BLUEZ5_UTILS_PLUGINS_HEALTH=y
BR2_PACKAGE_BLUEZ5_UTILS_PLUGINS_MIDI=y
BR2_PACKAGE_BLUEZ5_UTILS_PLUGINS_NFC=y
BR2_PACKAGE_BLUEZ5_UTILS_PLUGINS_SAP=y
BR2_PACKAGE_BLUEZ5_UTILS_PLUGINS_SIXAXIS=y
BR2_PACKAGE_BLUEZ5_UTILS_TEST=y
BR2_PACKAGE_BLUEZ5_TOOLS_BDADDR=y
BR2_PACKAGE_DROPBEAR=y
BR2_PACKAGE_ETHTOOL=y
BR2_PACKAGE_IW=y
BR2_PACKAGE_NETCAT=y
BR2_PACKAGE_NTP=y
BR2_PACKAGE_NTP_NTPDATE=y
BR2_PACKAGE_PPPD=y
BR2_PACKAGE_WGET=y
BR2_PACKAGE_WPA_SUPPLICANT=y
BR2_PACKAGE_NANO=y
BR2_TARGET_ROOTFS_EXT2=y
BR2_TARGET_ROOTFS_EXT2_4=y
BR2_TARGET_ROOTFS_EXT2_SIZE="120M"
BR2_PACKAGE_HOST_DOSFSTOOLS=y
BR2_PACKAGE_HOST_GENIMAGE=y
BR2_PACKAGE_HOST_MTOOLS=y

> Did you try a complete rebuild after changing your configuration (see [1])?
YES

Best regards.

Oscar Gomez Fuente
TST Sistemas
www.tst-sistemas.es