[Buildroot] Orange Pi Prime does not boot

[aai at tut.by]

16.07.2018, 16:23, "aai at tut.by" <aai at tut.by>:
> 13.07.2018, 21:18, "Peter Seiderer" <ps.report at gmx.net>:
>>  Hello,
>>
>>  On Fri, 13 Jul 2018 20:43:49 +0530, Jagan Teki <jagan at amarulasolutions.com> wrote:
>>
>>>   On Tue, Jul 10, 2018 at 2:23 PM, <aai at tut.by> wrote:
>>>   > Hello,
>>>   >
>>>   > orangepi_prime_defconfig does not work for me (try buildroot 2018.02.3 and 2018.05)
>>>   >
>>>   > I do:
>>>   > make orangepi_prime_defconfig
>>>   > make
>>>   >
>>>   > boot log:
>>>   > --------------------------------------------------------------
>>>   > Terminal ready
>>>   >
>>>   > U-Boot SPL 2017.11 (Jul 09 2018 - 10:12:15)
>>>   > DRAM: 2048 MiB
>>>   > Trying to boot from MMC1
>>>   >
>>>   >
>>>   > U-Boot 2017.11 (Jul 09 2018 - 10:12:15 +0300) Allwinner Technology
>>>   >
>>>   > CPU: Allwinner H5 (SUN50I)
>>>   > Model: OrangePi Prime
>>>   > DRAM: 2 GiB
>>>   > MMC: SUNXI SD/MMC: 0
>>>   > *** Warning - bad CRC, using default environment
>>>   >
>>>   > In: serial
>>>   > Out: serial
>>>   > Err: serial
>>>   > Net: No ethernet found.
>>>   > starting USB...
>>>   > USB0: USB EHCI 1.00
>>>   > USB1: USB OHCI 1.0
>>>   > scanning bus 0 for devices... 1 USB Device(s) found
>>>   > scanning usb for storage devices... 0 Storage Device(s) found
>>>   > Hit any key to stop autoboot: 0
>>>   > switch to partitions #0, OK
>>>   > mmc0 is current device
>>>   > Scanning mmc 0:1...
>>>   > Found U-Boot script /boot.scr
>>>   > reading /boot.scr
>>>   > 277 bytes read in 14 ms (18.6 KiB/s)
>>>   > ## Executing script at 4fc00000
>>>   > reading Image
>>>   > 17365504 bytes read in 870 ms (19 MiB/s)
>>>   > reading sun50i-h5-orangepi-prime.dtb
>>>   > 13714 bytes read in 25 ms (535.2 KiB/s)
>>>   > ## Flattened Device Tree blob at 4fa00000
>>>   > Booting using the fdt blob at 0x4fa00000
>>>   > Loading Device Tree to 0000000049ff9000, end 0000000049fff591 ... OK
>>
>>  From Jagans boot log:
>>
>>  reading /boot.scr
>>  277 bytes read in 15 ms (17.6 KiB/s)
>>  ## Executing script at 4fc00000
>>  reading Image
>>  16310784 bytes read in 820 ms (19 MiB/s)
>>  reading sun50i-h5-orangepi-prime.dtb
>>  13714 bytes read in 26 ms (514.6 KiB/s)
>>  ## Flattened Device Tree blob at 4fa00000
>>     Booting using the fdt blob at 0x4fa00000
>>     Loading Device Tree to 0000000049ff9000, end 0000000049fff591 ... OK
>>
>>  Jagan Image size: 16310784
>>  aai Image size: 17365504
>
> I built the image again on another computer. Image size is 16310784. But I can not check booting now.
> I will try later, maybe by the end of the week


17365504 - I made a mistake and posted the wrong log with optimization level 2.

I tried Buildroot 2018.05 + Ubuntu 16.04 and Buildroot 2018.02.3 + Fedors 28. Not work.

Maybe my board is broken, but Armbian 5.38 works.


>
>>  The only visible difference (besides not booting)...
>>
>>  Regards,
>>  Peter
>>
>>>   >
>>>   > Starting kernel ...
>>>   > --------------------------------------------------------------
>>>
>>>   It's booting fine with my side, here is full boot log[1]
>>>
>>>   [1] https://paste.ubuntu.com/p/mQsRxMrKnh/
>>>
>>>   Jagan.