[Buildroot] [PATCH 1/2] configs/freescale_t2080_qds_rdb_defconfig: new board

Matt Weber matthew.weber at rockwellcollins.com
Thu Aug 16 18:01:04 UTC 2018


The board is setup to track upstream Linux as the official
vendor support was complete(depricated) at 4.1 via NXP SDKs.

The target does not build uboot and assumes the user still uses the NXP
suggested prebuilts in the SDK2.0 (last release for PowerPC). If a
uboot is required, the source for SDK2.0 can be found in the following
repo.
http://git.freescale.com/git/cgit.cgi/ppc/sdk/u-boot.git/tag/?id=fsl-sdk-v2.0-1703

Signed-off-by: Matthew Weber <matthew.weber at rockwellcollins.com>
---

DEVELOPERS already covers my entry with a wildcard catching this one
configs/freescale_t*
---
 configs/freescale_t2080_qds_rdb_defconfig | 25 +++++++++++++++++++++++
 1 file changed, 25 insertions(+)
 create mode 100644 configs/freescale_t2080_qds_rdb_defconfig

diff --git a/configs/freescale_t2080_qds_rdb_defconfig b/configs/freescale_t2080_qds_rdb_defconfig
new file mode 100644
index 0000000000..3d03c32f7e
--- /dev/null
+++ b/configs/freescale_t2080_qds_rdb_defconfig
@@ -0,0 +1,25 @@
+# Architecture
+BR2_powerpc64=y
+BR2_powerpc_e6500=y
+
+# Linux headers same as kernel
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_17=y
+
+# Serial port config
+BR2_TARGET_GENERIC_GETTY_PORT="ttyS0"
+
+# Kernel
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.17.14"
+BR2_LINUX_KERNEL_DEFCONFIG="corenet64_smp"
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="fsl/t2080qds fsl/t2080rdb"
+BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
+
+# Filesystem
+BR2_TARGET_ROOTFS_CPIO=y
+BR2_TARGET_ROOTFS_CPIO_GZIP=y
+BR2_TARGET_ROOTFS_CPIO_UIMAGE=y
+# BR2_TARGET_ROOTFS_TAR is not set
+
-- 
2.17.0



More information about the buildroot mailing list