[Buildroot] [PATCH 1/1] boot/uboot: Really use host-dtc

[David De Grave]

Hi Thomas,

On Wed, Aug 1, 2018 at 12:43 PM, Thomas Petazzoni <
thomas.petazzoni at bootlin.com> wrote:

> Hello,
>
> On Wed, 1 Aug 2018 12:36:16 +0200, David De Grave wrote:
>
> > In the other hand, using the host-dtc is working but lead to other
> problems:
>
> So, using the U-Boot provided DTC is better when available. So indeed,
> I think you should just fix U-Boot so that when it
> uses ./scripts/dtc/dtc, it builds it first :-)
>

Indeed it sounds a better approach and submitted a new patch. Not sure
however if
it's well done. At least everything is running fine now on my side.


> DEVICE_TREE ?= $(CONFIG_DEFAULT_DEVICE_TREE:"%"=%)
> ifeq ($(DEVICE_TREE),)
> DEVICE_TREE := unset
> endif
>
> This is where your unset.dts comes from.
>

Indeed. Thx! :-)

Regards,
David.

-- 

*David De Grave*
Senior Embedded Software Developer
Gsm : +32(0)496.364.960 | Tel : +32-16-28.65.00 | Fax : +32-16-28a.65.01
Essensium-Mind <https://www.mind.be/> - Gaston Geenslaan 9, B-3001 Leuven,
Belgium
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20180801/3c434e2a/attachment.html>