[Buildroot] [BuildRoot] at91sam9x5ek_defconfig not booting

[Alejandro Ariel Fachini]

Well ill keep rying with at91 site support, because i did not changed
anything in the defconfig, is the defaultt configuration for nandflash.
I know for another search i did, that sam-ba 2.16 has an issue flashing
sam9x35 thats because i use 2.12.

Worth mentioning: The BootStrap Version is not changing even though it
should be 3.8.9, may be my kit is broken.

2017-10-18 18:01 GMT-03:00 Thomas Petazzoni <
thomas.petazzoni at free-electrons.com>:

> Hello,
>
> On Fri, 13 Oct 2017 15:36:24 -0300, Alejandro Ariel Fachini wrote:
>
> > > AT91Bootstrap 3.8.7 (lun oct  9 13:46:05 ART 2017)
> > >
> > > 1-Wire: Loading 1-Wire information ...
> > > 1-Wire: ROM Searching ... Done, 3 1-Wire chips found
> > >
> > > 1-Wire: BoardName | [Revid] | VendorName
> > >   #0  SAM9x5-EK [B0]      FLEX
> > >   #1  SAM9X35-CM [B2]      RONETIX
> > >   #2  SAM9x5-DM [B0]      FLEX
> > >
> > > 1-Wire: Board sn: 0x4010466 revision: 0x10421
> > >
> > > NAND: ONFI flash detected
> > > NAND: ONFI para CRC error!
> > > NAND: Manufacturer ID: 0xad Chip ID: 0xda
> > > WARNING: Fail to disable On-Die ECC
> > > Nand flash is not ONFI compliant, use 2-bit/512-byte ecc.
> > > NAND: Initialize PMECC params, cap: 2, sector: 512
> > > NAND: Image: Copy 0x80000 bytes from 0x40000 to 0x26f00000
> > > NAND: Done to load image
> > > <debug_uart> No serial driver found
>
> This last message looks really weird, and smells like a bogus U-Boot
> configuration.
>
> However, you posted in the at91.com forums at
> https://www.at91.com/viewtopic.php?f=9&p=49635 and here your boot logs
> show U-Boot starting.
>
> I don't have a at91sam9x5ek board at hand to test this.
>
> Best regards,
>
> Thomas
> --
> Thomas Petazzoni, CTO, Free Electrons
> Embedded Linux and Kernel engineering
> http://free-electrons.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20171019/051ff442/attachment.html>