[Buildroot] [PATCH v2 1/2] qt5 add qmake.conf.in for eglfs
Arnout Vandecappelle
arnout at mind.be
Wed Nov 8 22:30:44 UTC 2017
Hi Giulio,
On 08-11-17 19:21, Giulio Benetti wrote:
> EGLFS_DEVICE_INTEGRATION = eglfs_* doesn't work correctly with previous patch
> EGLFS_DEVICE_INTEGRATION = eglfs_viv/eglfs_* must be written before include(../common/linux_device_post.conf)
>
> Starting from qmake.conf.in,
> generate qmake.conf substituting @EGLFS_DEVICE@ with eglfs_viv or eglfs_mali
> according to Package selection
The commit message is still not entirely clear. Howe about this:
qt5: correct eglfs support in qmake.conf.in
Setting EGLFS_DEVICE_INTEGRATION at the end of qmake.conf like is done by commit
0c219ddb8a doesn't work correctly: it has to be set before the
include(../common/linux_device_post.conf)
Instead of appending to the file, change it into a qmake.conf.in template file
that contains an EGLFS_DEVICE_INTEGRATION assignment and update it with sed.
>
> Changes v1 -> v2:
>
> * Moved qmake.conf to qmake.conf.in
> * Added @EGLFS_DEVICE@ placeholder into qmake.conf.in
> * Modified QT5BASE_CONFIGURE_QMAKE_CONFIG to use sed
>
> Signed-off-by: Giulio Benetti <giulio.benetti at micronovasrl.com>
> ---
> package/qt5/qt5base/{qmake.conf => qmake.conf.in} | 2 ++
> package/qt5/qt5base/qt5base.mk | 12 +++++++++---
> 2 files changed, 11 insertions(+), 3 deletions(-)
> rename package/qt5/qt5base/{qmake.conf => qmake.conf.in} (95%)
>
> diff --git a/package/qt5/qt5base/qmake.conf b/package/qt5/qt5base/qmake.conf.in
> similarity index 95%
> rename from package/qt5/qt5base/qmake.conf
> rename to package/qt5/qt5base/qmake.conf.in
> index 8b6debe..fb698b9 100644
> --- a/package/qt5/qt5base/qmake.conf
> +++ b/package/qt5/qt5base/qmake.conf.in
> @@ -24,5 +24,7 @@ QMAKE_CFLAGS_ISYSTEM =
> # Architecturespecific configuration
> include(arch.conf)
>
> +EGLFS_DEVICE_INTEGRATION = @EGLFS_DEVICE@
> +
> include(../common/linux_device_post.conf)
> load(qt_config)
> diff --git a/package/qt5/qt5base/qt5base.mk b/package/qt5/qt5base/qt5base.mk
> index b3f9c79..d58a58a 100644
> --- a/package/qt5/qt5base/qt5base.mk
> +++ b/package/qt5/qt5base/qt5base.mk
> @@ -243,8 +243,13 @@ QT5BASE_INSTALL_LIBS_$(BR2_PACKAGE_QT5BASE_DBUS) += Qt5DBus
> ifeq ($(BR2_PACKAGE_QT5_VERSION_LATEST)$(BR2_PACKAGE_IMX_GPU_VIV),yy)
> # use vivante backend
> define QT5BASE_CONFIGURE_QMAKE_CONFIG
> - echo "EGLFS_DEVICE_INTEGRATION = eglfs_viv" >> \
> - $(@D)/mkspecs/devices/linux-buildroot-g++/qmake.conf
> + sed 's/@EGLFS_DEVICE@/eglfs_viv/g' $(QT5BASE_PKGDIR)/qmake.conf.in > \
> + $(QT5BASE_PKGDIR)/qmake.conf
What I meant is to write directly to the target file, so
$(@D)/mkspecs/devices/linux-buildroot-g++/qmake.conf
> +endef
> +else
> +define QT5BASE_CONFIGURE_QMAKE_CONFIG
> + sed '/@EGLFS_DEVICE@/,+1d' $(QT5BASE_PKGDIR)/qmake.conf.in > \
> + $(QT5BASE_PKGDIR)/qmake.conf
> endef
> endif
>
> @@ -263,9 +268,10 @@ endef
> endif
>
> define QT5BASE_CONFIGURE_CMDS
> + $(QT5BASE_CONFIGURE_QMAKE_CONFIG)
> $(INSTALL) -m 0644 -D $(QT5BASE_PKGDIR)/qmake.conf \
> $(@D)/mkspecs/devices/linux-buildroot-g++/qmake.conf
So remove this
> - $(QT5BASE_CONFIGURE_QMAKE_CONFIG)
> + $(RM) $(QT5BASE_PKGDIR)/qmake.conf
And this.
Regards,
Arnout
> $(INSTALL) -m 0644 -D $(QT5BASE_PKGDIR)/qplatformdefs.h \
> $(@D)/mkspecs/devices/linux-buildroot-g++/qplatformdefs.h
> $(QT5BASE_CONFIGURE_CONFIG_FILE)
>
--
Arnout Vandecappelle arnout at mind be
Senior Embedded Software Architect +32-16-286500
Essensium/Mind http://www.mind.be
G.Geenslaan 9, 3001 Leuven, Belgium BE 872 984 063 RPR Leuven
LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle
GPG fingerprint: 7493 020B C7E3 8618 8DEC 222C 82EB F404 F9AC 0DDF
More information about the buildroot
mailing list