[Buildroot] [PATCH 2/2] New Buildroot v2016.08 configuration for Acmesystems Arietta G25
Biagio Montaruli
biagio.hkr at gmail.com
Wed Sep 21 08:50:26 UTC 2016
- Update default configuration files for both 128MB and 256MB version :
> Add support for the default kernel version,
> Add support for AT91bootstrap v3.8.6
- Update 'post-image.sh' script and 'genimage.cfg' in order to build
sdcard.img for Arietta G25
- Update documentation and notes about how to build sdcard.img
for Arietta G25 in the readme.txt file
Signed-off-by: Biagio Montaruli <biagio.hkr at gmail.com>
---
board/acmesystems/arietta-g25/genimage.cfg | 12 ++++----
board/acmesystems/arietta-g25/post-image.sh | 2 +-
board/acmesystems/arietta-g25/readme.txt | 31 +++++++++++++--------
configs/acmesystems_arietta_g25_128mb_defconfig | 37 ++++++++++++++-----------
configs/acmesystems_arietta_g25_256mb_defconfig | 37 ++++++++++++++-----------
5 files changed, 68 insertions(+), 51 deletions(-)
diff --git a/board/acmesystems/arietta-g25/genimage.cfg b/board/acmesystems/arietta-g25/genimage.cfg
index 1080b0e..420f1b6 100644
--- a/board/acmesystems/arietta-g25/genimage.cfg
+++ b/board/acmesystems/arietta-g25/genimage.cfg
@@ -1,18 +1,18 @@
# Minimal SD card image for the Acmesystems Arietta G25
-#
+
image boot.vfat {
vfat {
file zImage {
image = "zImage"
}
-
+
file acme-arietta.dtb {
- image = "at91-ariag25.dtb"
+ image = "at91-ariettag25.dtb"
}
-
+
file boot.bin {
- image = "at91sam9x5_arietta-sdcardboot-linux-zimage-dt-3.7.bin"
- }
+ image = "at91sam9x5_arietta-sdcardboot-linux-zimage-dt-3.8.6.bin"
+ }
}
size = 16M
}
diff --git a/board/acmesystems/arietta-g25/post-image.sh b/board/acmesystems/arietta-g25/post-image.sh
index c82b189..4192826 100755
--- a/board/acmesystems/arietta-g25/post-image.sh
+++ b/board/acmesystems/arietta-g25/post-image.sh
@@ -6,7 +6,7 @@ GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp"
rm -rf "${GENIMAGE_TMP}"
-genimage \
+genimage \
--rootpath "${TARGET_DIR}" \
--tmppath "${GENIMAGE_TMP}" \
--inputpath "${BINARIES_DIR}" \
diff --git a/board/acmesystems/arietta-g25/readme.txt b/board/acmesystems/arietta-g25/readme.txt
index 485e275..c712c8f 100644
--- a/board/acmesystems/arietta-g25/readme.txt
+++ b/board/acmesystems/arietta-g25/readme.txt
@@ -1,11 +1,16 @@
-Acmesystems Arietta G25
+Acme Systems Arietta G25
Intro
=====
-This default configuration will allow you to start experimenting with the
-buildroot environment for the Arietta G25. With the current configuration
-it will bring-up the board, and allow access through the serial console.
+Buildroot configuration for Arietta G25.
+This default configuration allows you to build a minimal root filesystem
+which includes the support for the serial console.
+The default configuration for Arietta G25 includes the getty program that
+enables you to log in through the serial console ttyS0.
+After the boot, to log in at the getty prompt use the following credentials:
+Username: root
+Password: acmesystems
You can find additional informations, tutorials and a very comprehensive
documentation on http://www.acmesystems.it/arietta.
@@ -13,8 +18,8 @@ documentation on http://www.acmesystems.it/arietta.
Build instructions
==================
-To build an image for the arietta g25 choose the configuration
-corresponding to the arietta variant.
+To build an image for the Arietta G25 choose the configuration
+corresponding to the Arietta variant.
For 128MB RAM variant type:
@@ -24,7 +29,11 @@ else for 256MB RAM variant type:
$ make acmesystems_arietta_g25_256mb_defconfig
-then:
+To customize the configuration choosed type:
+
+$ make menuconfig
+
+When you are ready to start building Buildroot type:
$ make
@@ -34,12 +43,10 @@ How to write the microSD card
Once the build process is finished you will have an image called "sdcard.img"
in the output/images/ directory.
-Copy the bootable "sdcard.img" onto an SD card with "dd":
+Write the bootable SD card image "sdcard.img" onto an SD card with "dd" command:
$ sudo dd if=output/images/sdcard.img of=/dev/sdX
-Insert the microSD card into the arietta slot and power it.
+Insert the microSD card into the Arietta slot and power it.
-The image just built is fairly basic and the only output
-you will get is on serial console, please consider to use a DPI
-cable (http://www.acmesystems.it/DPI)
+To get the kernel log messages you can use a DPI cable (http://www.acmesystems.it/DPI)
diff --git a/configs/acmesystems_arietta_g25_128mb_defconfig b/configs/acmesystems_arietta_g25_128mb_defconfig
index e5ddf13..0e392bc 100644
--- a/configs/acmesystems_arietta_g25_128mb_defconfig
+++ b/configs/acmesystems_arietta_g25_128mb_defconfig
@@ -1,30 +1,35 @@
# Architecture
BR2_arm=y
-# Toolchain
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_1=y
+# Kernel header
+BR2_KERNEL_HEADERS_4_7=y
-# Kernel
+# System configuration
+BR2_TARGET_GENERIC_ISSUE="Welcome to Arietta-G25 Buildroot"
+BR2_TARGET_GENERIC_ROOT_PASSWD="acmesystems"
+BR2_TARGET_GENERIC_GETTY_PORT="ttyS0"
+BR2_TARGET_GENERIC_GETTY_BAUDRATE_115200=y
+BR2_ROOTFS_POST_IMAGE_SCRIPT="board/acmesystems/arietta-g25/post-image.sh"
+
+# Kernel configuration
BR2_LINUX_KERNEL=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.1.1"
BR2_LINUX_KERNEL_DEFCONFIG="at91_dt"
BR2_LINUX_KERNEL_DTS_SUPPORT=y
-BR2_LINUX_KERNEL_INTREE_DTS_NAME="at91-ariag25"
-BR2_LINUX_KERNEL_XZ=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="at91-ariettag25"
+
+# Root filesystem
+BR2_TARGET_ROOTFS_EXT2=y
+BR2_TARGET_ROOTFS_EXT2_4=y
+BR2_TARGET_ROOTFS_EXT2_LABEL="rootfs"
-# Bootloader
+# AT91bootstrap bootloader
BR2_TARGET_AT91BOOTSTRAP3=y
BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_GIT=y
-BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_URL="https://github.com/tanzilli/at91bootstrap.git"
-BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_VERSION="cedbde4b36695b715f469f4872f47e5cc8115000"
+BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_URL="https://github.com/linux4sam/at91bootstrap.git"
+BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_VERSION="v3.8.6"
BR2_TARGET_AT91BOOTSTRAP3_DEFCONFIG="arietta-128m"
-# Image
-BR2_ROOTFS_POST_IMAGE_SCRIPT="board/acmesystems/arietta-g25/post-image.sh"
-BR2_TARGET_ROOTFS_EXT2=y
-BR2_TARGET_ROOTFS_EXT2_4=y
-# BR2_TARGET_ROOTFS_TAR is not set
-BR2_PACKAGE_HOST_GENIMAGE=y
+# Tools to build sdcard.img
BR2_PACKAGE_HOST_DOSFSTOOLS=y
+BR2_PACKAGE_HOST_GENIMAGE=y
BR2_PACKAGE_HOST_MTOOLS=y
diff --git a/configs/acmesystems_arietta_g25_256mb_defconfig b/configs/acmesystems_arietta_g25_256mb_defconfig
index cf6f67b..0529847 100644
--- a/configs/acmesystems_arietta_g25_256mb_defconfig
+++ b/configs/acmesystems_arietta_g25_256mb_defconfig
@@ -1,30 +1,35 @@
# Architecture
BR2_arm=y
-# Toolchain
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_1=y
+# Kernel header
+BR2_KERNEL_HEADERS_4_7=y
-# Kernel
+# System configuration
+BR2_TARGET_GENERIC_ISSUE="Welcome to Arietta-G25 Buildroot"
+BR2_TARGET_GENERIC_ROOT_PASSWD="acmesystems"
+BR2_TARGET_GENERIC_GETTY_PORT="ttyS0"
+BR2_TARGET_GENERIC_GETTY_BAUDRATE_115200=y
+BR2_ROOTFS_POST_IMAGE_SCRIPT="board/acmesystems/arietta-g25/post-image.sh"
+
+# Kernel configuration
BR2_LINUX_KERNEL=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.1.1"
BR2_LINUX_KERNEL_DEFCONFIG="at91_dt"
BR2_LINUX_KERNEL_DTS_SUPPORT=y
-BR2_LINUX_KERNEL_INTREE_DTS_NAME="at91-ariag25"
-BR2_LINUX_KERNEL_XZ=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="at91-ariettag25"
+
+# Root filesystem
+BR2_TARGET_ROOTFS_EXT2=y
+BR2_TARGET_ROOTFS_EXT2_4=y
+BR2_TARGET_ROOTFS_EXT2_LABEL="rootfs"
-# Bootloader
+# AT91bootstrap bootloader
BR2_TARGET_AT91BOOTSTRAP3=y
BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_GIT=y
-BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_URL="https://github.com/tanzilli/at91bootstrap.git"
-BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_VERSION="cedbde4b36695b715f469f4872f47e5cc8115000"
+BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_URL="https://github.com/linux4sam/at91bootstrap.git"
+BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_VERSION="v3.8.6"
BR2_TARGET_AT91BOOTSTRAP3_DEFCONFIG="arietta-256m"
-# Image
-BR2_ROOTFS_POST_IMAGE_SCRIPT="board/acmesystems/arietta-g25/post-image.sh"
-BR2_TARGET_ROOTFS_EXT2=y
-BR2_TARGET_ROOTFS_EXT2_4=y
-# BR2_TARGET_ROOTFS_TAR is not set
-BR2_PACKAGE_HOST_GENIMAGE=y
+# Tools to build sdcard.img
BR2_PACKAGE_HOST_DOSFSTOOLS=y
+BR2_PACKAGE_HOST_GENIMAGE=y
BR2_PACKAGE_HOST_MTOOLS=y
--
2.7.4
More information about the buildroot
mailing list