[Buildroot] [PATCH] configs: freescale_imx31_3stack: bump kernel version to 4.1.15_2.0.0_ga
Vincent Stehle
vincent.stehle at laposte.net
Wed Nov 9 16:38:23 UTC 2016
From: Vincent Stehlé <vincent.stehle at laposte.net>
Switch to the kernel of release 4.1.15_2.0.0_ga, as it builds properly with
gcc 5.x, which is now the default.
We add a linux config fragment to disable the framebuffer, to repair the
build for imx_v6_v7_defconfig.
Suggested-by: Thomas Petazzoni <thomas.petazzoni at free-electrons.com>
Signed-off-by: Vincent Stehlé <vincent.stehle at laposte.net>
Signed-off-by: Julien Olivain <juju at cotds.org>
Tested-by: Julien Olivain <juju at cotds.org>
Cc: Fabio Estevam <fabio.estevam at nxp.com>
---
Hello Thomas and Fabio,
My friend Julien got the i.MX31 PDK and he could kindly test a few
buildroot configs!
His experiments show that mainline kernel will not boot "as is" on the PDK.
What he proposed instead is that we switch to a recent NXP/Freescale
release based on kernel 4.1, which does boot on the PDK.
Is that proposal fine with you, please?
Best regards,
Vincent.
board/freescale/imx31_3stack/linux.fragment | 1 +
configs/freescale_imx31_3stack_defconfig | 12 ++++++------
2 files changed, 7 insertions(+), 6 deletions(-)
create mode 100644 board/freescale/imx31_3stack/linux.fragment
diff --git a/board/freescale/imx31_3stack/linux.fragment b/board/freescale/imx31_3stack/linux.fragment
new file mode 100644
index 0000000..8d89e8e
--- /dev/null
+++ b/board/freescale/imx31_3stack/linux.fragment
@@ -0,0 +1 @@
+CONFIG_FB_MXS=n
diff --git a/configs/freescale_imx31_3stack_defconfig b/configs/freescale_imx31_3stack_defconfig
index bf1afad..0476fc1 100644
--- a/configs/freescale_imx31_3stack_defconfig
+++ b/configs/freescale_imx31_3stack_defconfig
@@ -3,18 +3,18 @@ BR2_arm=y
BR2_arm1136jf_s=y
BR2_ARM_EABIHF=y
-# Linux headers same as kernel, a 3.15 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_15=y
+# Linux headers same as kernel, a 4.1 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_1=y
# system
BR2_TARGET_GENERIC_GETTY_PORT="ttymxc0"
# kernel
BR2_LINUX_KERNEL=y
-# Note: sadly the Linux kernel will not boot on the i.MX31 PDK, starting with
-# v3.16 and at least up to v4.0-rc4; this is why we use v3.15.y here.
-BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.15.10"
+BR2_LINUX_KERNEL_CUSTOM_GIT=y
+BR2_LINUX_KERNEL_CUSTOM_REPO_URL="git://git.freescale.com/imx/linux-imx.git"
+BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="rel_imx_4.1.15_2.0.0_ga"
BR2_LINUX_KERNEL_DEFCONFIG="imx_v6_v7"
+BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/freescale/imx31_3stack/linux.fragment"
BR2_TARGET_ROOTFS_CPIO_GZIP=y
BR2_TARGET_ROOTFS_INITRAMFS=y
--
2.10.2
More information about the buildroot
mailing list