[Buildroot] [PATCH] configs/qemu: bump to latest version
Gustavo Zacarias
gustavo at zacarias.com.ar
Sat Jun 4 20:30:30 UTC 2016
Also bump the pc samples since they're tied to the (base) qemu config.
Results table:
Defconfig Kernel Qemu Network Status
--------------------------------------------------------------
aarch64_virt 4.5.6 2.5.0 YES OK (4)
arm_versatile 4.6.1 2.5.0 YES OK
arm_vexpress 4.6.1 2.5.0 YES OK
m68k_mcf5208 4.6.1 2.5.0 YES OK
m68k_q800 4.6.1 q800-v2.4.0 NO (3) OK
microblazebe 4.6.1 2.5.0 YES OK
microblazeel 4.6.1 2.5.0 YES OK
mips64el_malta 4.6.1 2.5.0 YES OK
mips64_malta 4.6.1 2.5.0 YES OK
mipsel_malta 4.6.1 2.5.0 YES OK
mips_malta 4.6.1 2.5.0 YES OK
ppc_g3beige 4.6.1 2.5.0 YES OK
ppc_mpc8544ds 4.6.1 2.5.0 YES OK
ppc_virtex_ml507 4.6.1 2.5.0 NO OK
ppc64_pseries 4.6.1 2.5.0 YES OK
sh4 4.6.1 2.5.0 YES OK
sh4eb 4.6.1 2.5.0 NO (1) OK
sparc_ss10 4.6.1 2.5.0 YES OK
sparc64_sun4u 4.6.1 2.5.0 YES OK
sparc_sun4u 4.6.1 2.5.0 YES OK
x86 4.6.1 2.5.0 YES OK
x86_64 4.6.1 2.5.0 YES OK
xtensa_lx60 4.4.12 2.5.0 YES OK (2)
xtensa_lx60_nommu 4.4.12 2.5.0 YES OK (2)
(1) - Probably an endian issue with 8139 emulation/driver
(2) - xtensa ethernet broken in 4.5/4.6
(3) - There's a network interface, but enabling it in qemu fails
(4) - Console looks dead in 4.6
Signed-off-by: Gustavo Zacarias <gustavo at zacarias.com.ar>
---
.../{linux-4.5.config => linux-4.6.config} | 0
.../{linux-4.5.config => linux-4.6.config} | 0
.../patches/linux/0001-fix-do_sigreturn.patch | 100 ---------------------
.../{linux-4.5.config => linux-4.6.config} | 0
.../{linux-4.5.config => linux-4.6.config} | 0
.../{linux-4.5.config => linux-4.6.config} | 0
.../{linux-4.5.config => linux-4.6.config} | 0
.../{linux-4.5.config => linux-4.6.config} | 0
.../{linux-4.5.config => linux-4.6.config} | 0
.../{linux-4.5.config => linux-4.6.config} | 0
.../{linux-4.5.config => linux-4.6.config} | 0
.../{linux-4.5.config => linux-4.6.config} | 0
.../{linux-4.5.config => linux-4.6.config} | 0
.../sh4-r2d/{linux-4.5.config => linux-4.6.config} | 0
.../{linux-4.5.config => linux-4.6.config} | 0
.../{linux-4.5.config => linux-4.6.config} | 0
.../{linux-4.5.config => linux-4.6.config} | 0
board/qemu/x86/linux-4.5.config | 1 -
board/qemu/x86/linux-4.6.config | 1 +
.../x86_64/{linux-4.5.config => linux-4.6.config} | 0
configs/pc_x86_64_bios_defconfig | 8 +-
configs/pc_x86_64_efi_defconfig | 8 +-
configs/qemu_aarch64_virt_defconfig | 2 +-
configs/qemu_arm_versatile_defconfig | 8 +-
configs/qemu_arm_vexpress_defconfig | 6 +-
configs/qemu_m68k_mcf5208_defconfig | 10 +--
configs/qemu_m68k_q800_defconfig | 8 +-
configs/qemu_microblazebe_mmu_defconfig | 8 +-
configs/qemu_microblazeel_mmu_defconfig | 8 +-
configs/qemu_mips64_malta_defconfig | 8 +-
configs/qemu_mips64el_malta_defconfig | 8 +-
configs/qemu_mips_malta_defconfig | 8 +-
configs/qemu_mipsel_malta_defconfig | 8 +-
configs/qemu_ppc64_pseries_defconfig | 6 +-
configs/qemu_ppc_g3beige_defconfig | 8 +-
configs/qemu_ppc_mpc8544ds_defconfig | 8 +-
configs/qemu_ppc_virtex_ml507_defconfig | 8 +-
configs/qemu_sh4_r2d_defconfig | 8 +-
configs/qemu_sh4eb_r2d_defconfig | 8 +-
configs/qemu_sparc64_sun4u_defconfig | 8 +-
configs/qemu_sparc_ss10_defconfig | 8 +-
configs/qemu_x86_64_defconfig | 8 +-
configs/qemu_x86_defconfig | 8 +-
configs/qemu_xtensa_lx60_defconfig | 2 +-
configs/qemu_xtensa_lx60_nommu_defconfig | 2 +-
45 files changed, 90 insertions(+), 192 deletions(-)
rename board/qemu/arm-versatile/{linux-4.5.config => linux-4.6.config} (100%)
rename board/qemu/m68k-mcf5208/{linux-4.5.config => linux-4.6.config} (100%)
delete mode 100644 board/qemu/m68k-mcf5208/patches/linux/0001-fix-do_sigreturn.patch
rename board/qemu/m68k-q800/{linux-4.5.config => linux-4.6.config} (100%)
rename board/qemu/microblazebe-mmu/{linux-4.5.config => linux-4.6.config} (100%)
rename board/qemu/microblazeel-mmu/{linux-4.5.config => linux-4.6.config} (100%)
rename board/qemu/mips-malta/{linux-4.5.config => linux-4.6.config} (100%)
rename board/qemu/mips64-malta/{linux-4.5.config => linux-4.6.config} (100%)
rename board/qemu/mips64el-malta/{linux-4.5.config => linux-4.6.config} (100%)
rename board/qemu/mipsel-malta/{linux-4.5.config => linux-4.6.config} (100%)
rename board/qemu/ppc-g3beige/{linux-4.5.config => linux-4.6.config} (100%)
rename board/qemu/ppc-mpc8544ds/{linux-4.5.config => linux-4.6.config} (100%)
rename board/qemu/ppc-virtex-ml507/{linux-4.5.config => linux-4.6.config} (100%)
rename board/qemu/sh4-r2d/{linux-4.5.config => linux-4.6.config} (100%)
rename board/qemu/sh4eb-r2d/{linux-4.5.config => linux-4.6.config} (100%)
rename board/qemu/sparc-ss10/{linux-4.5.config => linux-4.6.config} (100%)
rename board/qemu/sparc64-sun4u/{linux-4.5.config => linux-4.6.config} (100%)
delete mode 120000 board/qemu/x86/linux-4.5.config
create mode 120000 board/qemu/x86/linux-4.6.config
rename board/qemu/x86_64/{linux-4.5.config => linux-4.6.config} (100%)
diff --git a/board/qemu/arm-versatile/linux-4.5.config b/board/qemu/arm-versatile/linux-4.6.config
similarity index 100%
rename from board/qemu/arm-versatile/linux-4.5.config
rename to board/qemu/arm-versatile/linux-4.6.config
diff --git a/board/qemu/m68k-mcf5208/linux-4.5.config b/board/qemu/m68k-mcf5208/linux-4.6.config
similarity index 100%
rename from board/qemu/m68k-mcf5208/linux-4.5.config
rename to board/qemu/m68k-mcf5208/linux-4.6.config
diff --git a/board/qemu/m68k-mcf5208/patches/linux/0001-fix-do_sigreturn.patch b/board/qemu/m68k-mcf5208/patches/linux/0001-fix-do_sigreturn.patch
deleted file mode 100644
index c52a4e2..0000000
--- a/board/qemu/m68k-mcf5208/patches/linux/0001-fix-do_sigreturn.patch
+++ /dev/null
@@ -1,100 +0,0 @@
-From a95517992a37488c0bc8b629c47c570e580e407d Mon Sep 17 00:00:00 2001
-From: Greg Ungerer <gerg at uclinux.org>
-Date: Mon, 15 Feb 2016 16:36:29 +1000
-Subject: m68k: Use conventional function parameters for do_sigreturn
-
-Create conventional stack parameters for the calls to do_sigreturn and
-do_rt_sigreturn. The current C code for do_sigreturn and do_rt_sigreturn
-dig into the stack to create local pointers to the saved switch stack
-and the pt_regs structs.
-
-The motivation for this change is a problem with non-MMU targets that
-have broken signal return paths on newer versions of gcc. It appears as
-though gcc has determined that the pointers into the saved stack structs,
-and the saved structs themselves, are function parameters and updates to
-them will be lost on function return, so they are optimized away. This
-results in large parts of restore_sigcontext() and mangle_kernel_stack()
-functions being removed. Of course this results in non-functional code
-causing kernel oops. This problem has been observed with gcc version
-5.2 and 5.3, and probably exists in earlier versions as well.
-
-Using conventional stack parameter pointers passed to these functions has
-the advantage of the code here not needing to know the exact details of
-how the underlying entry handler layed these structs out on the stack.
-So the rather ugly pointer setup casting and arg referencing can be
-removed.
-
-The resulting code after this change is a few bytes larger (due to the
-overhead of creating the stack args and their tear down). Not being hot
-paths I don't think this is too much of a problem here.
-
-An alternative solution is to put a barrier() in the do_sigreturn() code,
-but this doesn't feel quite as clean as this solution.
-
-This change has been compile tested on all defconfigs, and run tested on
-Atari (through aranym), ColdFire with MMU (M5407EVB) and ColdFire with
-no-MMU (QEMU and M5208EVB).
-
-Signed-off-by: Greg Ungerer <gerg at uclinux.org>
-Acked-by: Andreas Schwab <schwab at linux-m68k.org>
-Signed-off-by: Geert Uytterhoeven <geert at linux-m68k.org>
----
- arch/m68k/kernel/entry.S | 6 ++++++
- arch/m68k/kernel/signal.c | 8 ++------
- 2 files changed, 8 insertions(+), 6 deletions(-)
-
-diff --git a/arch/m68k/kernel/entry.S b/arch/m68k/kernel/entry.S
-index b54ac7a..97cd3ea 100644
---- a/arch/m68k/kernel/entry.S
-+++ b/arch/m68k/kernel/entry.S
-@@ -71,13 +71,19 @@ ENTRY(__sys_vfork)
-
- ENTRY(sys_sigreturn)
- SAVE_SWITCH_STACK
-+ movel %sp,%sp at - | switch_stack pointer
-+ pea %sp@(SWITCH_STACK_SIZE+4) | pt_regs pointer
- jbsr do_sigreturn
-+ addql #8,%sp
- RESTORE_SWITCH_STACK
- rts
-
- ENTRY(sys_rt_sigreturn)
- SAVE_SWITCH_STACK
-+ movel %sp,%sp at - | switch_stack pointer
-+ pea %sp@(SWITCH_STACK_SIZE+4) | pt_regs pointer
- jbsr do_rt_sigreturn
-+ addql #8,%sp
- RESTORE_SWITCH_STACK
- rts
-
-diff --git a/arch/m68k/kernel/signal.c b/arch/m68k/kernel/signal.c
-index af1c4f3..2dcee3a 100644
---- a/arch/m68k/kernel/signal.c
-+++ b/arch/m68k/kernel/signal.c
-@@ -737,10 +737,8 @@ badframe:
- return 1;
- }
-
--asmlinkage int do_sigreturn(unsigned long __unused)
-+asmlinkage int do_sigreturn(struct pt_regs *regs, struct switch_stack *sw)
- {
-- struct switch_stack *sw = (struct switch_stack *) &__unused;
-- struct pt_regs *regs = (struct pt_regs *) (sw + 1);
- unsigned long usp = rdusp();
- struct sigframe __user *frame = (struct sigframe __user *)(usp - 4);
- sigset_t set;
-@@ -764,10 +762,8 @@ badframe:
- return 0;
- }
-
--asmlinkage int do_rt_sigreturn(unsigned long __unused)
-+asmlinkage int do_rt_sigreturn(struct pt_regs *regs, struct switch_stack *sw)
- {
-- struct switch_stack *sw = (struct switch_stack *) &__unused;
-- struct pt_regs *regs = (struct pt_regs *) (sw + 1);
- unsigned long usp = rdusp();
- struct rt_sigframe __user *frame = (struct rt_sigframe __user *)(usp - 4);
- sigset_t set;
---
-cgit v0.12
-
diff --git a/board/qemu/m68k-q800/linux-4.5.config b/board/qemu/m68k-q800/linux-4.6.config
similarity index 100%
rename from board/qemu/m68k-q800/linux-4.5.config
rename to board/qemu/m68k-q800/linux-4.6.config
diff --git a/board/qemu/microblazebe-mmu/linux-4.5.config b/board/qemu/microblazebe-mmu/linux-4.6.config
similarity index 100%
rename from board/qemu/microblazebe-mmu/linux-4.5.config
rename to board/qemu/microblazebe-mmu/linux-4.6.config
diff --git a/board/qemu/microblazeel-mmu/linux-4.5.config b/board/qemu/microblazeel-mmu/linux-4.6.config
similarity index 100%
rename from board/qemu/microblazeel-mmu/linux-4.5.config
rename to board/qemu/microblazeel-mmu/linux-4.6.config
diff --git a/board/qemu/mips-malta/linux-4.5.config b/board/qemu/mips-malta/linux-4.6.config
similarity index 100%
rename from board/qemu/mips-malta/linux-4.5.config
rename to board/qemu/mips-malta/linux-4.6.config
diff --git a/board/qemu/mips64-malta/linux-4.5.config b/board/qemu/mips64-malta/linux-4.6.config
similarity index 100%
rename from board/qemu/mips64-malta/linux-4.5.config
rename to board/qemu/mips64-malta/linux-4.6.config
diff --git a/board/qemu/mips64el-malta/linux-4.5.config b/board/qemu/mips64el-malta/linux-4.6.config
similarity index 100%
rename from board/qemu/mips64el-malta/linux-4.5.config
rename to board/qemu/mips64el-malta/linux-4.6.config
diff --git a/board/qemu/mipsel-malta/linux-4.5.config b/board/qemu/mipsel-malta/linux-4.6.config
similarity index 100%
rename from board/qemu/mipsel-malta/linux-4.5.config
rename to board/qemu/mipsel-malta/linux-4.6.config
diff --git a/board/qemu/ppc-g3beige/linux-4.5.config b/board/qemu/ppc-g3beige/linux-4.6.config
similarity index 100%
rename from board/qemu/ppc-g3beige/linux-4.5.config
rename to board/qemu/ppc-g3beige/linux-4.6.config
diff --git a/board/qemu/ppc-mpc8544ds/linux-4.5.config b/board/qemu/ppc-mpc8544ds/linux-4.6.config
similarity index 100%
rename from board/qemu/ppc-mpc8544ds/linux-4.5.config
rename to board/qemu/ppc-mpc8544ds/linux-4.6.config
diff --git a/board/qemu/ppc-virtex-ml507/linux-4.5.config b/board/qemu/ppc-virtex-ml507/linux-4.6.config
similarity index 100%
rename from board/qemu/ppc-virtex-ml507/linux-4.5.config
rename to board/qemu/ppc-virtex-ml507/linux-4.6.config
diff --git a/board/qemu/sh4-r2d/linux-4.5.config b/board/qemu/sh4-r2d/linux-4.6.config
similarity index 100%
rename from board/qemu/sh4-r2d/linux-4.5.config
rename to board/qemu/sh4-r2d/linux-4.6.config
diff --git a/board/qemu/sh4eb-r2d/linux-4.5.config b/board/qemu/sh4eb-r2d/linux-4.6.config
similarity index 100%
rename from board/qemu/sh4eb-r2d/linux-4.5.config
rename to board/qemu/sh4eb-r2d/linux-4.6.config
diff --git a/board/qemu/sparc-ss10/linux-4.5.config b/board/qemu/sparc-ss10/linux-4.6.config
similarity index 100%
rename from board/qemu/sparc-ss10/linux-4.5.config
rename to board/qemu/sparc-ss10/linux-4.6.config
diff --git a/board/qemu/sparc64-sun4u/linux-4.5.config b/board/qemu/sparc64-sun4u/linux-4.6.config
similarity index 100%
rename from board/qemu/sparc64-sun4u/linux-4.5.config
rename to board/qemu/sparc64-sun4u/linux-4.6.config
diff --git a/board/qemu/x86/linux-4.5.config b/board/qemu/x86/linux-4.5.config
deleted file mode 120000
index 735bcf7..0000000
--- a/board/qemu/x86/linux-4.5.config
+++ /dev/null
@@ -1 +0,0 @@
-../x86_64/linux-4.5.config
\ No newline at end of file
diff --git a/board/qemu/x86/linux-4.6.config b/board/qemu/x86/linux-4.6.config
new file mode 120000
index 0000000..62e694f
--- /dev/null
+++ b/board/qemu/x86/linux-4.6.config
@@ -0,0 +1 @@
+../x86_64/linux-4.6.config
\ No newline at end of file
diff --git a/board/qemu/x86_64/linux-4.5.config b/board/qemu/x86_64/linux-4.6.config
similarity index 100%
rename from board/qemu/x86_64/linux-4.5.config
rename to board/qemu/x86_64/linux-4.6.config
diff --git a/configs/pc_x86_64_bios_defconfig b/configs/pc_x86_64_bios_defconfig
index c3a1a35..e47ae3e 100644
--- a/configs/pc_x86_64_bios_defconfig
+++ b/configs/pc_x86_64_bios_defconfig
@@ -20,15 +20,15 @@ BR2_TARGET_ROOTFS_EXT2_4=y
# BR2_TARGET_ROOTFS_TAR is not set
BR2_ROOTFS_POST_IMAGE_SCRIPT="board/pc/post-image.sh"
-# Linux headers same as kernel, a 4.5 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_5=y
+# Linux headers same as kernel, a 4.6 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_6=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.5.2"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.6.1"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86_64/linux-4.5.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86_64/linux-4.6.config"
BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/pc/linux-extras.config"
BR2_LINUX_KERNEL_INSTALL_TARGET=y
diff --git a/configs/pc_x86_64_efi_defconfig b/configs/pc_x86_64_efi_defconfig
index 3152115..9b15495 100644
--- a/configs/pc_x86_64_efi_defconfig
+++ b/configs/pc_x86_64_efi_defconfig
@@ -23,15 +23,15 @@ BR2_TARGET_ROOTFS_EXT2_4=y
# BR2_TARGET_ROOTFS_TAR is not set
BR2_ROOTFS_POST_IMAGE_SCRIPT="board/pc/post-image.sh"
-# Linux headers same as kernel, a 4.5 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_5=y
+# Linux headers same as kernel, a 4.6 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_6=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.5.2"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.6.1"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86_64/linux-4.5.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86_64/linux-4.6.config"
BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/pc/linux-extras.config"
BR2_LINUX_KERNEL_INSTALL_TARGET=y
diff --git a/configs/qemu_aarch64_virt_defconfig b/configs/qemu_aarch64_virt_defconfig
index acd9280..d540bf5 100644
--- a/configs/qemu_aarch64_virt_defconfig
+++ b/configs/qemu_aarch64_virt_defconfig
@@ -15,6 +15,6 @@ BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_5=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.5.3"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.5.6"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/aarch64-virt/linux-4.5.config"
diff --git a/configs/qemu_arm_versatile_defconfig b/configs/qemu_arm_versatile_defconfig
index 444cc20..f219ebf 100644
--- a/configs/qemu_arm_versatile_defconfig
+++ b/configs/qemu_arm_versatile_defconfig
@@ -10,14 +10,14 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyAMA0"
BR2_TARGET_ROOTFS_EXT2=y
# BR2_TARGET_ROOTFS_TAR is not set
-# Linux headers same as kernel, a 4.5 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_5=y
+# Linux headers same as kernel, a 4.6 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_6=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.5.3"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.6.1"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/arm-versatile/linux-4.5.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/arm-versatile/linux-4.6.config"
BR2_LINUX_KERNEL_DTS_SUPPORT=y
BR2_LINUX_KERNEL_INTREE_DTS_NAME="versatile-pb"
diff --git a/configs/qemu_arm_vexpress_defconfig b/configs/qemu_arm_vexpress_defconfig
index ebe6bca..65fa3be 100644
--- a/configs/qemu_arm_vexpress_defconfig
+++ b/configs/qemu_arm_vexpress_defconfig
@@ -13,13 +13,13 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyAMA0"
BR2_TARGET_ROOTFS_EXT2=y
# BR2_TARGET_ROOTFS_TAR is not set
-# Linux headers same as kernel, a 4.5 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_5=y
+# Linux headers same as kernel, a 4.6 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_6=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.5.3"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.6.1"
BR2_LINUX_KERNEL_DEFCONFIG="vexpress"
BR2_LINUX_KERNEL_DTS_SUPPORT=y
BR2_LINUX_KERNEL_INTREE_DTS_NAME="vexpress-v2p-ca9"
diff --git a/configs/qemu_m68k_mcf5208_defconfig b/configs/qemu_m68k_mcf5208_defconfig
index 31db912..babde74 100644
--- a/configs/qemu_m68k_mcf5208_defconfig
+++ b/configs/qemu_m68k_mcf5208_defconfig
@@ -9,17 +9,15 @@ BR2_SYSTEM_DHCP="eth0"
BR2_TARGET_ROOTFS_INITRAMFS=y
# BR2_TARGET_ROOTFS_TAR is not set
-BR2_GLOBAL_PATCH_DIR="board/qemu/m68k-mcf5208/patches/"
-
-# Linux headers same as kernel, a 4.5 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_5=y
+# Linux headers same as kernel, a 4.6 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_6=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.5.3"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.6.1"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/m68k-mcf5208/linux-4.5.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/m68k-mcf5208/linux-4.6.config"
BR2_LINUX_KERNEL_VMLINUX=y
# Serial port config
diff --git a/configs/qemu_m68k_q800_defconfig b/configs/qemu_m68k_q800_defconfig
index e1df89d..f23fe9f 100644
--- a/configs/qemu_m68k_q800_defconfig
+++ b/configs/qemu_m68k_q800_defconfig
@@ -9,15 +9,15 @@ BR2_SYSTEM_DHCP="eth0"
BR2_TARGET_ROOTFS_EXT2=y
# BR2_TARGET_ROOTFS_TAR is not set
-# Linux headers same as kernel, a 4.5 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_5=y
+# Linux headers same as kernel, a 4.6 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_6=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.5.3"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.6.1"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/m68k-q800/linux-4.5.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/m68k-q800/linux-4.6.config"
BR2_LINUX_KERNEL_VMLINUX=y
# Serial port config
diff --git a/configs/qemu_microblazebe_mmu_defconfig b/configs/qemu_microblazebe_mmu_defconfig
index dc6e9cb..32a6d65 100644
--- a/configs/qemu_microblazebe_mmu_defconfig
+++ b/configs/qemu_microblazebe_mmu_defconfig
@@ -10,14 +10,14 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyUL0"
# BR2_TARGET_ROOTFS_TAR is not set
BR2_TARGET_ROOTFS_INITRAMFS=y
-# Linux headers same as kernel, a 4.5 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_5=y
+# Linux headers same as kernel, a 4.6 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_6=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.5.3"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.6.1"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/microblazebe-mmu/linux-4.5.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/microblazebe-mmu/linux-4.6.config"
BR2_LINUX_KERNEL_LINUX_BIN=y
BR2_LINUX_KERNEL_PATCH="board/qemu/microblazebe-mmu/xilinx-xemaclite.patch"
diff --git a/configs/qemu_microblazeel_mmu_defconfig b/configs/qemu_microblazeel_mmu_defconfig
index 519c4be..5725ad6 100644
--- a/configs/qemu_microblazeel_mmu_defconfig
+++ b/configs/qemu_microblazeel_mmu_defconfig
@@ -10,14 +10,14 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyUL0"
# BR2_TARGET_ROOTFS_TAR is not set
BR2_TARGET_ROOTFS_INITRAMFS=y
-# Linux headers same as kernel, a 4.5 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_5=y
+# Linux headers same as kernel, a 4.6 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_6=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.5.3"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.6.1"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/microblazeel-mmu/linux-4.5.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/microblazeel-mmu/linux-4.6.config"
BR2_LINUX_KERNEL_LINUX_BIN=y
BR2_LINUX_KERNEL_PATCH="board/qemu/microblazeel-mmu/xilinx-xemaclite.patch"
diff --git a/configs/qemu_mips64_malta_defconfig b/configs/qemu_mips64_malta_defconfig
index 02e5300..6d1e207 100644
--- a/configs/qemu_mips64_malta_defconfig
+++ b/configs/qemu_mips64_malta_defconfig
@@ -9,15 +9,15 @@ BR2_SYSTEM_DHCP="eth0"
BR2_TARGET_ROOTFS_EXT2=y
# BR2_TARGET_ROOTFS_TAR is not set
-# Linux headers same as kernel, a 4.5 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_5=y
+# Linux headers same as kernel, a 4.6 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_6=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.5.3"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.6.1"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64-malta/linux-4.5.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64-malta/linux-4.6.config"
BR2_LINUX_KERNEL_VMLINUX=y
# Serial port config
diff --git a/configs/qemu_mips64el_malta_defconfig b/configs/qemu_mips64el_malta_defconfig
index 9bbf691..a4b638a 100644
--- a/configs/qemu_mips64el_malta_defconfig
+++ b/configs/qemu_mips64el_malta_defconfig
@@ -9,15 +9,15 @@ BR2_SYSTEM_DHCP="eth0"
BR2_TARGET_ROOTFS_EXT2=y
# BR2_TARGET_ROOTFS_TAR is not set
-# Linux headers same as kernel, a 4.5 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_5=y
+# Linux headers same as kernel, a 4.6 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_6=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.5.3"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.6.1"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64el-malta/linux-4.5.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64el-malta/linux-4.6.config"
BR2_LINUX_KERNEL_VMLINUX=y
# Serial port config
diff --git a/configs/qemu_mips_malta_defconfig b/configs/qemu_mips_malta_defconfig
index 26c729d..66b67a5 100644
--- a/configs/qemu_mips_malta_defconfig
+++ b/configs/qemu_mips_malta_defconfig
@@ -9,15 +9,15 @@ BR2_SYSTEM_DHCP="eth0"
BR2_TARGET_ROOTFS_EXT2=y
# BR2_TARGET_ROOTFS_TAR is not set
-# Linux headers same as kernel, a 4.5 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_5=y
+# Linux headers same as kernel, a 4.6 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_6=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.5.3"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.6.1"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips-malta/linux-4.5.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips-malta/linux-4.6.config"
BR2_LINUX_KERNEL_VMLINUX=y
# Serial port config
diff --git a/configs/qemu_mipsel_malta_defconfig b/configs/qemu_mipsel_malta_defconfig
index 3b3911b..4e4f838 100644
--- a/configs/qemu_mipsel_malta_defconfig
+++ b/configs/qemu_mipsel_malta_defconfig
@@ -9,15 +9,15 @@ BR2_SYSTEM_DHCP="eth0"
BR2_TARGET_ROOTFS_EXT2=y
# BR2_TARGET_ROOTFS_TAR is not set
-# Linux headers same as kernel, a 4.5 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_5=y
+# Linux headers same as kernel, a 4.6 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_6=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.5.3"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.6.1"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mipsel-malta/linux-4.5.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mipsel-malta/linux-4.6.config"
BR2_LINUX_KERNEL_VMLINUX=y
# Serial port config
diff --git a/configs/qemu_ppc64_pseries_defconfig b/configs/qemu_ppc64_pseries_defconfig
index a7a6b7a..133c977 100644
--- a/configs/qemu_ppc64_pseries_defconfig
+++ b/configs/qemu_ppc64_pseries_defconfig
@@ -10,12 +10,12 @@ BR2_TARGET_GENERIC_GETTY_PORT="hvc0"
BR2_TARGET_ROOTFS_EXT2=y
# BR2_TARGET_ROOTFS_TAR is not set
-# Linux headers same as kernel, a 4.5 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_5=y
+# Linux headers same as kernel, a 4.6 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_6=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.5.3"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.6.1"
BR2_LINUX_KERNEL_DEFCONFIG="pseries"
BR2_LINUX_KERNEL_VMLINUX=y
diff --git a/configs/qemu_ppc_g3beige_defconfig b/configs/qemu_ppc_g3beige_defconfig
index 6e10f06..bb4e681 100644
--- a/configs/qemu_ppc_g3beige_defconfig
+++ b/configs/qemu_ppc_g3beige_defconfig
@@ -9,15 +9,15 @@ BR2_SYSTEM_DHCP="eth0"
BR2_TARGET_ROOTFS_EXT2=y
# BR2_TARGET_ROOTFS_TAR is not set
-# Linux headers same as kernel, a 4.5 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_5=y
+# Linux headers same as kernel, a 4.6 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_6=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.5.3"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.6.1"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/ppc-g3beige/linux-4.5.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/ppc-g3beige/linux-4.6.config"
BR2_LINUX_KERNEL_VMLINUX=y
# Serial port config
diff --git a/configs/qemu_ppc_mpc8544ds_defconfig b/configs/qemu_ppc_mpc8544ds_defconfig
index 4c112ad..9131855 100644
--- a/configs/qemu_ppc_mpc8544ds_defconfig
+++ b/configs/qemu_ppc_mpc8544ds_defconfig
@@ -9,15 +9,15 @@ BR2_SYSTEM_DHCP="eth0"
# BR2_TARGET_ROOTFS_TAR is not set
BR2_TARGET_ROOTFS_INITRAMFS=y
-# Linux headers same as kernel, a 4.5 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_5=y
+# Linux headers same as kernel, a 4.6 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_6=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.5.3"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.6.1"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/ppc-mpc8544ds/linux-4.5.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/ppc-mpc8544ds/linux-4.6.config"
BR2_LINUX_KERNEL_VMLINUX=y
# Serial port config
diff --git a/configs/qemu_ppc_virtex_ml507_defconfig b/configs/qemu_ppc_virtex_ml507_defconfig
index 4c029a3..ec39f1d 100644
--- a/configs/qemu_ppc_virtex_ml507_defconfig
+++ b/configs/qemu_ppc_virtex_ml507_defconfig
@@ -6,8 +6,8 @@ BR2_powerpc_440=y
# BR2_TARGET_ROOTFS_TAR is not set
BR2_TARGET_ROOTFS_INITRAMFS=y
-# Linux headers same as kernel, a 4.5 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_5=y
+# Linux headers same as kernel, a 4.6 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_6=y
# Use soft float
BR2_SOFT_FLOAT=y
@@ -15,9 +15,9 @@ BR2_SOFT_FLOAT=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.5.3"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.6.1"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/ppc-virtex-ml507/linux-4.5.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/ppc-virtex-ml507/linux-4.6.config"
BR2_LINUX_KERNEL_VMLINUX=y
BR2_LINUX_KERNEL_DTS_SUPPORT=y
BR2_LINUX_KERNEL_INTREE_DTS_NAME="virtex440-ml507"
diff --git a/configs/qemu_sh4_r2d_defconfig b/configs/qemu_sh4_r2d_defconfig
index 7df8e84..0a48ca2 100644
--- a/configs/qemu_sh4_r2d_defconfig
+++ b/configs/qemu_sh4_r2d_defconfig
@@ -10,13 +10,13 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttySC1"
BR2_TARGET_ROOTFS_EXT2=y
# BR2_TARGET_ROOTFS_TAR is not set
-# Linux headers same as kernel, a 4.5 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_5=y
+# Linux headers same as kernel, a 4.6 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_6=y
# Linux kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.5.3"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.6.1"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/sh4-r2d/linux-4.5.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/sh4-r2d/linux-4.6.config"
BR2_LINUX_KERNEL_ZIMAGE=y
diff --git a/configs/qemu_sh4eb_r2d_defconfig b/configs/qemu_sh4eb_r2d_defconfig
index 9bf21fd..f0844a0 100644
--- a/configs/qemu_sh4eb_r2d_defconfig
+++ b/configs/qemu_sh4eb_r2d_defconfig
@@ -9,13 +9,13 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttySC1"
BR2_TARGET_ROOTFS_EXT2=y
# BR2_TARGET_ROOTFS_TAR is not set
-# Linux headers same as kernel, a 4.5 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_5=y
+# Linux headers same as kernel, a 4.6 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_6=y
# Linux kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.5.3"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.6.1"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/sh4eb-r2d/linux-4.5.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/sh4eb-r2d/linux-4.6.config"
BR2_LINUX_KERNEL_ZIMAGE=y
diff --git a/configs/qemu_sparc64_sun4u_defconfig b/configs/qemu_sparc64_sun4u_defconfig
index f7e0749..12c0358 100644
--- a/configs/qemu_sparc64_sun4u_defconfig
+++ b/configs/qemu_sparc64_sun4u_defconfig
@@ -9,12 +9,12 @@ BR2_SYSTEM_DHCP="eth0"
BR2_TARGET_ROOTFS_EXT2=y
# BR2_TARGET_ROOTFS_TAR is not set
-# Linux headers same as kernel, a 4.5 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_5=y
+# Linux headers same as kernel, a 4.6 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_6=y
# Linux kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.5.3"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.6.1"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/sparc64-sun4u/linux-4.5.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/sparc64-sun4u/linux-4.6.config"
diff --git a/configs/qemu_sparc_ss10_defconfig b/configs/qemu_sparc_ss10_defconfig
index c88654a..7d24905 100644
--- a/configs/qemu_sparc_ss10_defconfig
+++ b/configs/qemu_sparc_ss10_defconfig
@@ -9,12 +9,12 @@ BR2_SYSTEM_DHCP="eth0"
BR2_TARGET_ROOTFS_EXT2=y
# BR2_TARGET_ROOTFS_TAR is not set
-# Linux headers same as kernel, a 4.5 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_5=y
+# Linux headers same as kernel, a 4.6 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_6=y
# Linux kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.5.3"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.6.1"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/sparc-ss10/linux-4.5.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/sparc-ss10/linux-4.6.config"
diff --git a/configs/qemu_x86_64_defconfig b/configs/qemu_x86_64_defconfig
index c3c2c3d..8972ed9 100644
--- a/configs/qemu_x86_64_defconfig
+++ b/configs/qemu_x86_64_defconfig
@@ -9,12 +9,12 @@ BR2_TARGET_GENERIC_GETTY_PORT="tty1"
BR2_TARGET_ROOTFS_EXT2=y
# BR2_TARGET_ROOTFS_TAR is not set
-# Linux headers same as kernel, a 4.5 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_5=y
+# Linux headers same as kernel, a 4.6 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_6=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.5.3"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.6.1"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86_64/linux-4.5.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86_64/linux-4.6.config"
diff --git a/configs/qemu_x86_defconfig b/configs/qemu_x86_defconfig
index f7d757d..658beb1 100644
--- a/configs/qemu_x86_defconfig
+++ b/configs/qemu_x86_defconfig
@@ -10,12 +10,12 @@ BR2_TARGET_GENERIC_GETTY_PORT="tty1"
BR2_TARGET_ROOTFS_EXT2=y
# BR2_TARGET_ROOTFS_TAR is not set
-# Linux headers same as kernel, a 4.5 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_5=y
+# Linux headers same as kernel, a 4.6 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_6=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.5.3"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.6.1"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86/linux-4.5.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86/linux-4.6.config"
diff --git a/configs/qemu_xtensa_lx60_defconfig b/configs/qemu_xtensa_lx60_defconfig
index c46610a..0d439af 100644
--- a/configs/qemu_xtensa_lx60_defconfig
+++ b/configs/qemu_xtensa_lx60_defconfig
@@ -22,7 +22,7 @@ BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_4=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.4.9"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.4.12"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/xtensa-lx60/linux-4.4.config"
BR2_LINUX_KERNEL_IMAGE_TARGET_CUSTOM=y
diff --git a/configs/qemu_xtensa_lx60_nommu_defconfig b/configs/qemu_xtensa_lx60_nommu_defconfig
index 7880a6c..ebd3cd3 100644
--- a/configs/qemu_xtensa_lx60_nommu_defconfig
+++ b/configs/qemu_xtensa_lx60_nommu_defconfig
@@ -26,7 +26,7 @@ BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_4=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.4.9"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.4.12"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/xtensa-lx60/linux-4.4-nommu.config"
BR2_LINUX_KERNEL_IMAGE_TARGET_CUSTOM=y
--
2.7.3
More information about the buildroot
mailing list