[Buildroot] [PATCH 6/7] zynq_zc706: bump U-Boot to xilinx-v2016.2

[Thomas Petazzoni]

Hello,

On Thu, 28 Jul 2016 12:47:39 -0500, Matthew Weber wrote:

> > -If you already have the Xilinx tools installed, the following sequence
> > -will unpack, patch and build the rfs, kernel, uboot, and uboot-spl.
> > -
> > -make zynq_zc706_defconfig
> > -make uboot-patch
> > -cp ${XILINX_SDK_LIB}/hwplatform_templates/ZC706_hw_platform/ps7_init.{c,h} \
> > -   output/build/uboot-xilinx-v2014.1/board/xilinx/zynq/
> > -
> > -Where ${XILINX_SDK_LIB} is ${XILINX}/SDK/${VERSION}/data/embeddedsw/lib.
> > -
> > -After copying these files into the U-Boot source tree, you can
> > -continue the build with:  
> 
> Isn't this good information to still generally include somewhere in
> the notes for any of the Zynq boards as if they build a custom bit
> file there would be updated handoff files needing copied in.

These manual steps are no longer needed with the new U-Boot version, so
removing those details makes sense.

Thomas
-- 
Thomas Petazzoni, CTO, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com