[Buildroot] [PATCH 1/1] configs/orangepi: Changing Linux kernel to v4.5-rc1
Peter Korsgaard
peter at korsgaard.com
Fri Jan 29 16:50:03 UTC 2016
>>>>> "Eelco" == Eelco Chaudron <echaudron at xiot.nl> writes:
> Signed-off-by: Eelco Chaudron <echaudron at xiot.nl>
> ---
> board/orangepi/orangepipc/post-image.sh | 8 +++++++-
> board/orangepi/orangepipc/readme.txt | 4 ----
> configs/orangepipc_defconfig | 8 ++++----
> 3 files changed, 11 insertions(+), 9 deletions(-)
> diff --git a/board/orangepi/orangepipc/post-image.sh b/board/orangepi/orangepipc/post-image.sh
> index 9cca1b1..dbe1516 100755
> --- a/board/orangepi/orangepipc/post-image.sh
> +++ b/board/orangepi/orangepipc/post-image.sh
> @@ -6,7 +6,13 @@ GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp"
> rm -rf "${GENIMAGE_TMP}"
> -genimage \
> +# As we now use the Linux v4.5-RC1 kernel no orangepi-pc dtb exists yet.
> +# However the orangepi-plus dtb has not much content, only mmc0 and uart
> +# which are equal to the pc version of the board, so we use it here.
> +mv ${BINARIES_DIR}/sun8i-h3-orangepi-plus.dtb ${BINARIES_DIR}/sun8i-h3-orangepi-pc.dtb
> +
> +
> +genimage \
> --rootpath "${TARGET_DIR}" \
> --tmppath "${GENIMAGE_TMP}" \
> --inputpath "${BINARIES_DIR}" \
> diff --git a/board/orangepi/orangepipc/readme.txt b/board/orangepi/orangepipc/readme.txt
> index 00845a4..f12c867 100644
> --- a/board/orangepi/orangepipc/readme.txt
> +++ b/board/orangepi/orangepipc/readme.txt
> @@ -7,10 +7,6 @@ This default configuration will allow you to start experimenting with the
> buildroot environment for the OrangePi PC. With the current configuration
> it will bring-up the board, and allow access through the serial console.
> -Unfortunately this boards processor is not yet supported by the
> -mainline kernel, and therefore this default configuration is using a
> -private Linux kernel repository based on 4.4-rc.
> -
> How to build it
> ===============
> diff --git a/configs/orangepipc_defconfig b/configs/orangepipc_defconfig
> index 34358fb..79a7bd4 100644
> --- a/configs/orangepipc_defconfig
> +++ b/configs/orangepipc_defconfig
> @@ -10,20 +10,20 @@ BR2_ROOTFS_POST_BUILD_SCRIPT="board/orangepi/orangepipc/post-build.sh"
> BR2_ROOTFS_POST_IMAGE_SCRIPT="board/orangepi/orangepipc/post-image.sh"
> BR2_LINUX_KERNEL=y
> BR2_LINUX_KERNEL_CUSTOM_GIT=y
> -BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/jwrdegoede/linux-sunxi.git"
> -BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="a516ac6dda21e6f5edceecd08b475b16e360656b"
> +BR2_LINUX_KERNEL_CUSTOM_REPO_URL="git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git"
> +BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="v4.5-rc1"
We prefer to use tarballs when possible, so I've changed it to use the
4.5-rc1 tarball.
You also forgot to update the kernel headers to match.
Committed with that fixed, thanks.
--
Bye, Peter Korsgaard
More information about the buildroot
mailing list