[Buildroot] [git commit] configs: add Freescale i.MX6 SoloX Sabre SD support

Wed Nov 4 21:50:35 UTC 2015

commit: http://git.buildroot.net/buildroot/commit/?id=f8208503d4fe49dbcb3f36efcada6c2cba6060a9
branch: http://git.buildroot.net/buildroot/commit/?id=refs/heads/master

The i.MX6 SoloX SABRE board for smart devices is Freescale's reference design
board based on the heterogeneous ARM Cortex-A9 + Cortex-M4 i.MX6 SoloX
applications processor.

This defconfig is inspired from previous freescale_imx6*sabresd_defconfig, and
is based on Freescale "official" git repo on git.freescale.com and SW release
3.10.53_1.1.0_ga.

Signed-off-by: Vincent StehlÃ© <vincent.stehle at laposte.net>
Cc: Gary Bisson <bisson.gary at gmail.com>
Cc: JÃ©rÃ´me Pouiller <jezz at sysmic.org>
Cc: Gilles Talis <gilles.talis at gmail.com>
Cc: Luca Ceresoli <luca at lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni at free-electrons.com>
---
 board/freescale/imx6sabre/readme.txt      |   63 ++++++++++++++++++++++------
 configs/freescale_imx6sxsabresd_defconfig |   35 ++++++++++++++++
 2 files changed, 84 insertions(+), 14 deletions(-)

diff --git a/board/freescale/imx6sabre/readme.txt b/board/freescale/imx6sabre/readme.txt
index 6850885..6c44e22 100644
--- a/board/freescale/imx6sabre/readme.txt
+++ b/board/freescale/imx6sabre/readme.txt
@@ -1,14 +1,19 @@
-*******************************************************
-Freescale i.MX6Q and i.MX6DL SABRESD development boards
-*******************************************************
+********************************************************
+Freescale i.MX6 Q, DL and SoloX SABRE development boards
+********************************************************
 
-This file documents the Buildroot support for the Freescale SABRE Board for
-Smart Devices Based on the i.MX 6 Series (SABRESD), as well as the Freescale
-SABRE Board for Automotive Infotainment.
+This file documents the Buildroot support for the Freescale SABRE Board
+for Smart Devices Based on the i.MX 6 and i.MX 6SoloX Series (SABRESD),
+as well as the Freescale SABRE Board for Automotive Infotainment.
 
-Read the SABRESD Quick Start Guide for an introduction to the board:
+Read the i.MX 6 SABRESD Quick Start Guide for an introduction to the
+board:
 http://cache.freescale.com/files/32bit/doc/quick_start_guide/SABRESDB_IMX6_QSG.pdf
 
+Read the i.MX 6 SoloX SABRESD Quick Start Guide for an introduction to
+the board:
+http://cache.freescale.com/files/32bit/doc/user_guide/IMX6SOLOXQSG.pdf
+
 Read the SABRE for Automotive Infotainment Quick Start Guide for an
 introduction to the board:
 http://cache.freescale.com/files/32bit/doc/user_guide/IMX6SABREINFOQSG.pdf
@@ -25,6 +30,10 @@ For i.MX6DL SABRE SD board:
 
   make freescale_imx6dlsabresd_defconfig
 
+For i.MX6 SoloX SABRE SD board:
+
+  make freescale_imx6sxsabresd_defconfig
+
 For i.MX6Q SABRE Auto board:
 
   make freescale_imx6qsabreauto_defconfig
@@ -38,12 +47,12 @@ Build all components:
   make
 
 You will find in ./output/images/ the following files:
-  - imx6dl-sabresd.dtb or imx6q-sabresd.dtb or imx6q-sabreauto.dtb or
-    imx6dl-sabreauto.dtb
+  - imx6dl-sabresd.dtb or imx6q-sabresd.dtb or imx6sx-sdb.dtb or
+    imx6q-sabreauto.dtb or imx6dl-sabreauto.dtb
   - rootfs.ext2
   - rootfs.tar
   - u-boot.imx
-  - uImage
+  - uImage, or zImage for i.MX6 SoloX
 
 Create a bootable SD card
 =========================
@@ -63,17 +72,43 @@ and copy the bootloader, kernel, DTBs and root filesystem as needed.
 Boot the SABRE board
 ====================
 
-SABRE SD
---------
+i.MX6 SABRE SD
+--------------
 
-To boot your newly created system on a SABRE SD Board (refer to the SABRE SD
-Quick Start Guide for guidance):
+To boot your newly created system on an i.MX6 SABRE SD Board (refer to
+the i.MX6 SABRE SD Quick Start Guide for guidance):
 - insert the SD card in the SD3 slot of the board;
 - locate the BOOT dip switches (SW6), set dips 2 and 7 to ON, all others to OFF;
 - connect a Micro USB cable to Debug Port and connect using a terminal emulator
   at 115200 bps, 8n1;
 - power on the board.
 
+i.MX6 SoloX SABRE SD
+--------------------
+
+To boot your newly created system on an i.MX6 SoloX SABRE SD Board
+(refer to the i.MX6 SoloX SABRE SD Quick Start Guide for guidance):
+- insert the SD card in the J4-SD4 socket at the bottom of the board;
+- Set the SW10, SW11 and SW12 DIP switches at the top of the board in
+  their default position, to boot from SD card. Reference configuration:
+
+    SW10
+     1   2   3   4   5   6   7   8
+    off off off off off off off off
+
+    SW11
+     1   2  3  4  5   6   7   8
+    off off ON ON ON off off off
+
+    SW12
+     1  2   3   4   5   6   7   8
+    off ON off off off off off off
+
+- connect a Micro USB cable to the J16 Debug Port at the bottom of the
+  board. This is a dual UART debug port; connect to the first tty using
+  a terminal emulator at 115200 bps, 8n1;
+- power on the board with the SW1-PWR switch at the top of the board.
+
 SABRE Auto
 ----------
 
diff --git a/configs/freescale_imx6sxsabresd_defconfig b/configs/freescale_imx6sxsabresd_defconfig
new file mode 100644
index 0000000..bd0d6cc
--- /dev/null
+++ b/configs/freescale_imx6sxsabresd_defconfig
@@ -0,0 +1,35 @@
+# architecture
+BR2_arm=y
+BR2_cortex_a9=y
+
+# patches
+BR2_GLOBAL_PATCH_DIR="board/freescale/imx6sabre/patches"
+
+# toolchain
+BR2_KERNEL_HEADERS_VERSION=y
+BR2_DEFAULT_KERNEL_VERSION="3.10.53"
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_10=y
+
+# system
+BR2_TARGET_GENERIC_GETTY_PORT="ttymxc0"
+
+# kernel
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_GIT=y
+BR2_LINUX_KERNEL_CUSTOM_REPO_URL="git://git.freescale.com/imx/linux-2.6-imx.git"
+BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="rel_imx_3.10.53_1.1.0_ga"
+BR2_LINUX_KERNEL_DEFCONFIG="imx_v7"
+BR2_LINUX_KERNEL_ZIMAGE=y
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="imx6sx-sdb"
+
+# filesystem
+BR2_TARGET_ROOTFS_EXT2=y
+
+# bootloader
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BOARDNAME="mx6sxsabresd"
+BR2_TARGET_UBOOT_CUSTOM_GIT=y
+BR2_TARGET_UBOOT_CUSTOM_REPO_URL="git://git.freescale.com/imx/uboot-imx.git"
+BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="rel_imx_3.10.53_1.1.0_ga"
+BR2_TARGET_UBOOT_FORMAT_IMX=y
