[Buildroot] [PATCH 2/2] configs: add Freescale SABRE Auto board support
Arnout Vandecappelle
arnout at mind.be
Sat Mar 21 15:37:54 UTC 2015
On 20/03/15 18:41, Vincent Stehlé wrote:
> SABRE Board for Automotive Infotainment (SABRE Auto, a.k.a. SABRE-AI) is
> Freescale's evaluation board based on the i.MX 6 ARM Cortex-A9 applications
> processor.
>
> Those defconfigs are an adaptation of freescale_imx6{q,dl}sabresd_defconfig for
> SABRE Auto, and are thus based on Freescale "official" git repo on
> git.freescale.com and SW release 3.10.17_1.0.0_ga.
>
> Signed-off-by: Vincent Stehlé <vincent.stehle at freescale.com>
> Cc: Gilles Talis <gilles.talis at gmail.com>
> Cc: Peter Korsgaard <jacmet at sunsite.dk>
> Cc: Luca Ceresoli <luca at lucaceresoli.net>
> Cc: Gary Bisson <bisson.gary at gmail.com>
[snip]
> @@ -58,6 +71,30 @@ Quick Start Guide for guidance):
> at 115200 bps, 8n1;
> - power on the board.
>
> +To boot your newly created system on a SABRE Auto Board (refer to the SABRE for
> +Automotive Infotainment Quick Start Guide for guidance):
I would introduce subheadings here for the two boards, so
Boot the SABRE board
====================
SABRE SD
--------
...
SABRE Auto
----------
...
> +- insert the SD card in the CPU card SD card socket J14;
> +- Set the S1, S2 and S3 DIP switches and J3 jumper to boot from SD on CPU card.
> + Reference configuration:
> +
> + S1
> + 1 2 3 4 5 6 7 8 9 10
> + off ON off off ON off off off off off
> +
> + S2
> + 1 2 3 4
> + off off ON off
> +
> + S3
> + 1 2 3 4
> + off off ON ON
> +
> + J3: 1-2
> +
> +- connect an RS-232 UART cable to CPU card debug port J18 and connect using a
Shouldn't that be Debug UART DB9? I'm just looking at the quick start guide here...
> + terminal emulator at 115200 bps, 8n1;
> +- power on the board.
> +
> Enjoy!
>
> References
I don't suppose you've created similar pages for the auto?
Regards,
Arnout
[snip]
--
Arnout Vandecappelle arnout at mind be
Senior Embedded Software Architect +32-16-286500
Essensium/Mind http://www.mind.be
G.Geenslaan 9, 3001 Leuven, Belgium BE 872 984 063 RPR Leuven
LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle
GPG fingerprint: 7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F
More information about the buildroot
mailing list