[Buildroot] [PATCH 15/15] docs/manual: remove references to largefile
Yann E. MORIN
yann.morin.1998 at free.fr
Sat Mar 14 22:56:13 UTC 2015
Gustavo, All,
On 2015-03-13 15:22 -0300, Gustavo Zacarias spake thusly:
> Signed-off-by: Gustavo Zacarias <gustavo at zacarias.com.ar>
Commit log should state why you switched to using rrdtool as example.
otherwise:
Reviewed-by: "Yann E. MORIN" <yann.morin.1998 at free.fr>
Regards,
Yann E. MORIN.
> ---
> docs/manual/adding-packages-directory.txt | 37 ++++++++++++++-----------------
> docs/manual/configure.txt | 31 +++++++++++++-------------
> 2 files changed, 32 insertions(+), 36 deletions(-)
>
> diff --git a/docs/manual/adding-packages-directory.txt b/docs/manual/adding-packages-directory.txt
> index 8a88282..bb49dd5 100644
> --- a/docs/manual/adding-packages-directory.txt
> +++ b/docs/manual/adding-packages-directory.txt
> @@ -82,20 +82,21 @@ is not met.
> An example illustrates both the usage of +select+ and +depends on+.
>
> --------------------------
> -config BR2_PACKAGE_ACL
> - bool "acl"
> - select BR2_PACKAGE_ATTR
> - depends on BR2_LARGEFILE
> +config BR2_PACKAGE_RRDTOOL
> + bool "rrdtool"
> + depends on BR2_USE_WCHAR
> + select BR2_PACKAGE_FREETYPE
> + select BR2_PACKAGE_LIBART
> + select BR2_PACKAGE_LIBPNG
> + select BR2_PACKAGE_ZLIB
> help
> - POSIX Access Control Lists, which are used to define more
> - fine-grained discretionary access rights for files and
> - directories.
> - This package also provides libacl.
> + RRDtool is the OpenSource industry standard, high performance
> + data logging and graphing system for time series data.
>
> - http://savannah.nongnu.org/projects/acl
> + http://oss.oetiker.ch/rrdtool/
>
> -comment "acl needs a toolchain w/ largefile"
> - depends on !BR2_LARGEFILE
> +comment "rrdtool needs a toolchain w/ wchar"
> + depends on !BR2_USE_WCHAR
> --------------------------
>
>
> @@ -164,10 +165,10 @@ coding style].
> ==== Dependencies on target and toolchain options
>
> Many packages depend on certain options of the toolchain: the choice of
> -C library, C++ support, largefile support, thread support, RPC support,
> -IPv6 support, wchar support, or dynamic library support. Some packages
> -can only be built on certain target architectures, or if an MMU is
> -available in the processor.
> +C library, C++ support, thread support, RPC support, IPv6 support,
> +wchar support, or dynamic library support. Some packages can only be
> +built on certain target architectures, or if an MMU is available in the
> +processor.
>
> These dependencies have to be expressed with the appropriate 'depends
> on' statements in the Config.in file. Additionally, for dependencies on
> @@ -199,7 +200,7 @@ foo needs a toolchain w/ featA, featB, featC
> for example:
>
> --------------------------
> -aircrack-ng needs a toolchain w/ largefile, threads
> +mpd needs a toolchain w/ C++, threads, wchar
> --------------------------
>
> or
> @@ -245,10 +246,6 @@ use in the comment.
> ** Dependency symbol: +BR2_INSTALL_LIBSTDCPP+
> ** Comment string: `C++`
>
> -* largefile support
> -** Dependency symbol: +BR2_LARGEFILE+
> -** Comment string: +largefile+
> -
> * thread support
> ** Dependency symbol: +BR2_TOOLCHAIN_HAS_THREADS+
> ** Comment string: +threads+ (unless +BR2_TOOLCHAIN_HAS_THREADS_NPTL+
> diff --git a/docs/manual/configure.txt b/docs/manual/configure.txt
> index bd235f0..c06182b 100644
> --- a/docs/manual/configure.txt
> +++ b/docs/manual/configure.txt
> @@ -109,20 +109,19 @@ most important ones allow to:
> * Change the version of the GCC compiler, binutils and the C library.
>
> * Select a number of toolchain options (uClibc only): whether the
> - toolchain should have largefile support (i.e. support for files
> - larger than 2 GB on 32 bits systems), IPv6 support, RPC support
> - (used mainly for NFS), wide-char support, locale support (for
> - internationalization), C++ support or thread support. Depending on
> - which options you choose, the number of userspace applications and
> - libraries visible in Buildroot menus will change: many applications
> - and libraries require certain toolchain options to be enabled. Most
> - packages show a comment when a certain toolchain option is required
> - to be able to enable those packages. If needed, you can further
> - refine the uClibc configuration by running +make
> - uclibc-menuconfig+. Note however that all packages in Buildroot are
> - tested against the default uClibc configuration bundled in
> - Buildroot: if you deviate from this configuration by removing
> - features from uClibc, some packages may no longer build.
> + toolchain should have IPv6 support, RPC support (used mainly for
> + NFS), wide-char support, locale support (for internationalization),
> + C++ support or thread support. Depending on which options you choose,
> + the number of userspace applications and libraries visible in
> + Buildroot menus will change: many applications and libraries require
> + certain toolchain options to be enabled. Most packages show a comment
> + when a certain toolchain option is required to be able to enable
> + those packages. If needed, you can further refine the uClibc
> + configuration by running +make uclibc-menuconfig+. Note however that
> + all packages in Buildroot are tested against the default uClibc
> + configuration bundled in Buildroot: if you deviate from this
> + configuration by removing features from uClibc, some packages may no
> + longer build.
>
> It is worth noting that whenever one of those options is modified,
> then the entire toolchain and system must be rebuilt. See
> @@ -178,8 +177,8 @@ Then, you have three solutions to use an external toolchain:
> external toolchain uses the 'glibc' library, you only have to tell
> whether your toolchain supports C\++ or not and whether it has
> built-in RPC support. If your external toolchain uses the 'uClibc'
> - library, then you have to tell Buildroot if it supports largefile,
> - IPv6, RPC, wide-char, locale, program invocation, threads and
> + library, then you have to tell Buildroot if it supports IPv6,
> + RPC, wide-char, locale, program invocation, threads and
> C++. At the beginning of the execution, Buildroot will tell you if
> the selected options do not match the toolchain configuration.
>
> --
> 2.0.5
>
> _______________________________________________
> buildroot mailing list
> buildroot at busybox.net
> http://lists.busybox.net/mailman/listinfo/buildroot
--
.-----------------.--------------------.------------------.--------------------.
| Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ |
| +33 223 225 172 `------------.-------: X AGAINST | \e/ There is no |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. |
'------------------------------^-------^------------------^--------------------'
More information about the buildroot
mailing list