[Buildroot] [PATCH v2 1/1] board: add support for Warpboard
Arthur LAMBERT
lambertarthur22 at gmail.com
Fri Jun 26 12:24:08 UTC 2015
Le Friday 26 Jun 2015 à 00:38:23 (+0200), Yann E. MORIN a écrit :
> Arnout, Arthur, All,
>
> On 2015-06-26 00:26 +0200, Arnout Vandecappelle spake thusly:
> > On 06/25/15 10:54, Arthur LAMBERT wrote:
> > > Arnout, All,
> > >
> > > Le Wednesday 24 Jun 2015 à 23:46:52 (+0200), Arnout Vandecappelle a écrit :
> > >>> +
> > >>> +Enable bluetooth
> > >>> +================
> > >>> +hciattach /dev/ttymxc4 any
> > >>> +hciconfig hci0 up
> > >>> +
> > >>> +Enable Wifi
> > >>> +==========
> > >>> +modprobe brcmfmac
> > >>> +ifconfig wlan0 up
> > >>
> > >> To do something useful, you'll also need a wpa-supplicant I guess...
> > >>
> > >> Since you anyway have a rootfs overlay, you could add init scripts to start
> > >> wifi and bluetooth. We don't usually do that, but I think it would be a good idea.
> > >
> > > In fact I need bluez-util (to be able to run hciattach command also). And yes I also need wpa_supplicant for wifi.
> > > So ok I will enable these two packages and add init script
> >
> > Question for the other BR developers (especially Peter): do you agree it's a
> > good idea to make a non-minimal defconfig that includes bluez and wpa_supplicant?
>
> Our board defconfig files are ususally just enough to bring up the board
> and get a shell in there. If network is wired, then a dhcp client is OK
> (usually udhcpc from busybox).
>
> Everything (bluez and wpa-supplicant included) else is out of scope for
> a defconfig, IMHO.
>
> One case where I'd be inclined to accept more than the above is a
> full-wireless device (like the soon-to-come-I-hope 96boards stuff).
> But since wpa-supplicant needs configuration that we can't provide
> (SSID and key), I don't see the point of adding it to the defconfig.
>
> However, we've decided to accept "demo" defconfigs, which can be packed
> with more features than a simple board defconfig. We haven't had any
> single such demo defconfig submitted so far.
>
> Still, even if we accept demo defconfigs, I stil think we should have a
> small board defconfig file before we get a demo.
>
Ok I will no keep init script for bluetooth and wifi and will remove wpa/bluez stuff.
> Regards,
> Yann E. MORIN.
Regards,
Arthur.
>
> --
> .-----------------.--------------------.------------------.--------------------.
> | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
> | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ |
> | +33 223 225 172 `------------.-------: X AGAINST | \e/ There is no |
> | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. |
> '------------------------------^-------^------------------^--------------------'
More information about the buildroot
mailing list