[Buildroot] First rootfile system build using buildroot
Thomas Petazzoni
thomas.petazzoni at free-electrons.com
Mon Aug 31 20:45:44 UTC 2015
Dinesh,
On Mon, 31 Aug 2015 20:07:50 +0530, Dinesh Guleria wrote:
> I am new to buildroot. I am Trying to learn it. I am following this manual.
> http://buildroot.uclibc.org/downloads/manual/manual.html
>
> So i have started with Rpi.
>
> I am trying to build my own rootfile system for RPI using buildroot.
>
> I have downloaded following cross compiler folder from git :--
> https://github.com/raspberrypi/tools/tree/master/arm-bcm2708/gcc-linaro-arm-linux-gnueabihf-raspbian
> as mentioned in this link :--
> http://hertaville.com/2012/09/28/development-environment-raspberry-pi-cross-compiler/
If you're a beginner with Buildroot, don't start with a customer
compiler. Either use the one generated by Buildroot ("Buildroot
toolchain") or use a pre-defined external toolchain ("Sourcery
CodeBench 2014.05" if you're using the RPi 1, or "Linaro" if you're
using the RPi 2).
Best regards,
Thomas
--
Thomas Petazzoni, CTO, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
More information about the buildroot
mailing list