[Buildroot] [PATCH v2 0/3] i.MX6 SABRESD improvements (using a Freescale kernel)
Luca Ceresoli
luca at lucaceresoli.net
Wed Oct 1 15:03:43 UTC 2014
Hi,
here are 3 little improvements to the i.MX6 SABRESD board support in Buildroot,
both suggested by Thomas Petazzoni in [1].
This differs from the patchest I sent earlier [2] in the kernel origin:
keep using git.freescale.com instead of switching to a mainline kernel, as
per the discussion in [2].
Patches 1 and 2 are unchanged from v1.
They have been built and run on an i.MX6DL SABRESD board by me and on the
i.MX6Q variant by Vincent Stehlé, so I added his Tested-by tag.
Patch 3 is new in this series and adds a very handy tool to boot a board from
USB.
Luca Ceresoli (3):
freescale/imx6-sabresd: use global patch dir for U-Boot patches
freescale/imx6-sabresd: lock down kernel headers to the kernel version
imx-usb-loader: new package
...ommon-boot-Linux-to-init-in-mfgtools-mode.patch | 36 ++++++++++++++++++++++
...ommon-boot-Linux-to-init-in-mfgtools-mode.patch | 36 ----------------------
configs/freescale_imx6dlsabresd_defconfig | 9 +++++-
configs/freescale_imx6qsabresd_defconfig | 9 +++++-
package/Config.in.host | 1 +
package/imx-usb-loader/Config.in.host | 14 +++++++++
package/imx-usb-loader/imx-usb-loader.mk | 22 +++++++++++++
7 files changed, 89 insertions(+), 38 deletions(-)
create mode 100644 board/freescale/imx6sabresd/patches/uboot/uboot-0001-mx6qsabre_common-boot-Linux-to-init-in-mfgtools-mode.patch
delete mode 100644 board/freescale/imx6sabresd/uboot-0001-mx6qsabre_common-boot-Linux-to-init-in-mfgtools-mode.patch
create mode 100644 package/imx-usb-loader/Config.in.host
create mode 100644 package/imx-usb-loader/imx-usb-loader.mk
[1] http://lists.busybox.net/pipermail/buildroot/2014-September/106704.html
[2] http://lists.busybox.net/pipermail/buildroot/2014-September/106972.html
--
1.9.1
More information about the buildroot
mailing list