[Buildroot] [PATCH 1/1] configs: bump zedboard to 2014.1

[Spenser Gilliland]

On May 28, 2014 1:16 AM, "Thomas Petazzoni" <
thomas.petazzoni at free-electrons.com> wrote:
>
> Dear Spenser Gilliland,
>
> On Tue, 27 May 2014 16:15:32 -0500, Spenser Gilliland wrote:
>
> > +Due to licensing issues, the files ps7_init.c/h are not able to be
> > +distributed with the U-Boot source code.  These files are required to
make a
> > +boot.bin file.
> > +
> > +If you already have the Xilinx tools installed, the follwing sequence
will
> > +unpack, patch and build the rfs, kernel, uboot, and uboot-spl.
> > +
> > +make zedboard_defconfig
> > +make uboot-patch
> > +cp
${XILINX}/ISE_DS/EDK/sw/lib/hwplatform_templates/zed_hw_platform/ps7_init.{c,h}
\
> > +output/build/uboot-xilinx-v2014.1/boards/xilinx/zynq/
> > +make
>
> Does this means that the U-Boot build will fail without those files? If
> that's the case, then that's not really an acceptable solution, because
> this defconfig will continuously fail to build in our Jenkins CI.

No, it will not fail during the build.  However, the boot.bin (uboot spl)
binary will not work on the target.

For qemu testing, the u-boot.img image can be used.

Thanks,
Spenser

> Best regards,
>
> Thomas
> --
> Thomas Petazzoni, CTO, Free Electrons
> Embedded Linux, Kernel and Android engineering
> http://free-electrons.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20140528/4ce335af/attachment.html>