[Buildroot] [PATCH 1/1] udev: remove left-over S10udev script from udev virtual package
Yann E. MORIN
yann.morin.1998 at free.fr
Thu Jul 31 17:14:03 UTC 2014
Danomi, All,
On 2014-07-30 22:32 -0400, Danomi Manchego spake thusly:
> The S10udev script is not installed or referenced, and eudev has its own
> S10udev. So we can simply remove it.
>
> Signed-off-by: Danomi Manchego <danomimanchego123 at gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998 at free.fr>
Regards,
Yann E. MORIN.
> ---
> package/udev/S10udev | 48 ------------------------------------------------
> 1 file changed, 48 deletions(-)
> delete mode 100755 package/udev/S10udev
>
> diff --git a/package/udev/S10udev b/package/udev/S10udev
> deleted file mode 100755
> index cf825b4..0000000
> --- a/package/udev/S10udev
> +++ /dev/null
> @@ -1,48 +0,0 @@
> -#!/bin/sh
> -#
> -# udev This is a minimal non-LSB version of a UDEV startup script. It
> -# was derived by stripping down the udev-058 LSB version for use
> -# with buildroot on embedded hardware using Linux 2.6.34+ kernels.
> -#
> -# You may need to customize this for your system's resource limits
> -# (including startup time!) and administration. For example, if
> -# your early userspace has a custom initramfs or initrd you might
> -# need /dev much earlier; or without hotpluggable busses (like USB,
> -# PCMCIA, MMC/SD, and so on) your /dev might be static after boot.
> -#
> -# This script assumes your system boots right into the eventual root
> -# filesystem, and that init runs this udev script before any programs
> -# needing more device nodes than the bare-bones set -- /dev/console,
> -# /dev/zero, /dev/null -- that's needed to boot and run this script.
> -#
> -
> -# Check for missing binaries
> -UDEV_BIN=/lib/udev/udevd
> -test -x $UDEV_BIN || exit 5
> -
> -# Check for config file and read it
> -UDEV_CONFIG=/etc/udev/udev.conf
> -test -r $UDEV_CONFIG || exit 6
> -. $UDEV_CONFIG
> -
> -case "$1" in
> - start)
> - printf "Populating ${udev_root:-/dev} using udev: "
> - printf '\000\000\000\000' > /proc/sys/kernel/hotplug
> - $UDEV_BIN -d || (echo "FAIL" && exit 1)
> - udevadm trigger
> - echo "done"
> - ;;
> - stop)
> - # Stop execution of events
> - udevadm control --stop-exec-queue
> - killall udevd
> - ;;
> - *)
> - echo "Usage: $0 {start|stop}"
> - exit 1
> - ;;
> -esac
> -
> -
> -exit 0
> --
> 1.7.9.5
>
> _______________________________________________
> buildroot mailing list
> buildroot at busybox.net
> http://lists.busybox.net/mailman/listinfo/buildroot
--
.-----------------.--------------------.------------------.--------------------.
| Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ |
| +33 223 225 172 `------------.-------: X AGAINST | \e/ There is no |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. |
'------------------------------^-------^------------------^--------------------'
More information about the buildroot
mailing list