[Buildroot] Antw: Re: How to get the kernel to mount a rootfs without an initramfs ?? (2)
Frank Ihle
frank.ihle at hs-offenburg.de
Mon Feb 17 08:23:43 UTC 2014
I was thinking the same when I read those lines. But a bad sign may be
not the right word, when u-boot is able to handle the SD device. So the
kernel just isn't able to find what he actually should. Sadly my time is
running short and I can't figure out right now what's the problem.
Thanks for the help so far.
Kind Regards,
Frank
> I'm not familiar with the Atmel MCI controller, but my gut feeling says
> that all these zeroes are a bad sign.
>
> As I said before: you should check the BSP for your board, there is
> probably something wrong there.
>
> For sure, this issue is not buildroot-related. It's purely kernel-related.
>
>
> Regards,
> Arnout
>
> atmel_mci atmel_mci.0: Atmel MCI controller at 0xf0008000 irq 12, 1 slots
> mmc_host mmc0: card is not present
> mmc1: clock 0Hz busmode 1 powermode 0 cs 0 Vdd 0 width 0 timing 0
> atmel_mci atmel_mci.1: Atmel MCI controller at 0xf000c000 irq 26, 1 slots
> mmc_host mmc1: card is not present
>
> (Yes the card is in the slot ;)
> [snip]
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20140217/08a57dbe/attachment.html>
More information about the buildroot
mailing list