[Buildroot] [PATCH] ts5x00: remember to set the active flag
Vivien Didelot
vivien.didelot at savoirfairelinux.com
Tue Dec 23 15:24:56 UTC 2014
Signed-off-by: Vivien Didelot <vivien.didelot at savoirfairelinux.com>
---
board/ts/ts5x00/readme.txt | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/board/ts/ts5x00/readme.txt b/board/ts/ts5x00/readme.txt
index a1d919e..1e50682 100644
--- a/board/ts/ts5x00/readme.txt
+++ b/board/ts/ts5x00/readme.txt
@@ -43,7 +43,8 @@ Then install SYSLINUX in the mounted partition:
IMPORTANT: In order for the board to boot the Compact Flash with a recent
config, the BIOS must use Logical Block Addressing (LBA). You can do it by
choosing "Ide 0: AUTOCONFIG, LBA" under "IDE DRIVE GEOMETRY" in the "Basic CMOS
-Configuration" screen. For details about the CMOS setup, please see:
+Configuration" screen. Also, don't forget to set the 'active' (or 'bootable')
+flag on partition 1. For details about the CMOS setup, please see:
http://wiki.embeddedarm.com/wiki/TS-5500#System_BIOS_Setup_Screens
Connect a terminal program to the rs232 connector marked "COM2"
--
2.2.1
More information about the buildroot
mailing list