[Buildroot] [PATCH 08/14] boot/uboot/Config.in: Fix BR2_TARGET_UBOOT_SPL
Jörg Krause
jkrause at posteo.de
Fri Dec 12 23:16:05 UTC 2014
Building an SPL image depends on the board configuration. This option
does not enable the SPL build, but only copies the built SPL image to
the binary images folder. The current help text is misleading.
Signed-off-by: Jörg Krause <jkrause at posteo.de>
---
boot/uboot/Config.in | 12 +++++++-----
1 file changed, 7 insertions(+), 5 deletions(-)
diff --git a/boot/uboot/Config.in b/boot/uboot/Config.in
index 8a5bebc..801ea2d 100644
--- a/boot/uboot/Config.in
+++ b/boot/uboot/Config.in
@@ -232,13 +232,15 @@ config BR2_TARGET_UBOOT_ETH1ADDR
endif # BR2_TARGET_UBOOT_NETWORK
config BR2_TARGET_UBOOT_SPL
- bool "U-Boot SPL support"
+ bool "Install U-Boot SPL binary image"
depends on !BR2_TARGET_XLOADER
help
- Enable the U-Boot SPL support. SPL is a first stage
- bootloader loaded into internal memory in charge of
- enabling and configuring the external memory (DDR),
- and load the u-boot program into DDR.
+ Install the U-Boot SPL binary image to the images
+ directory.
+ SPL is a first stage bootloader loaded into internal
+ memory in charge of enabling and configuring the
+ external memory (DDR), and load the u-boot program
+ into DDR.
config BR2_TARGET_UBOOT_SPL_NAME
string "U-Boot SPL target name"
--
2.1.3
More information about the buildroot
mailing list