[Buildroot] [pkg-perl infra 01/12] perl: new infrastructure
Francois Perrad
fperrad at gmail.com
Wed Nov 20 17:01:49 UTC 2013
Signed-off-by: Francois Perrad <francois.perrad at gadz.org>
---
package/Makefile.in | 1 +
package/pkg-perl.mk | 220 +++++++++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 221 insertions(+)
create mode 100644 package/pkg-perl.mk
diff --git a/package/Makefile.in b/package/Makefile.in
index 612f3c7..cd0437c 100644
--- a/package/Makefile.in
+++ b/package/Makefile.in
@@ -363,4 +363,5 @@ include package/pkg-utils.mk
include package/pkg-download.mk
include package/pkg-autotools.mk
include package/pkg-cmake.mk
+include package/pkg-perl.mk
include package/pkg-generic.mk
diff --git a/package/pkg-perl.mk b/package/pkg-perl.mk
new file mode 100644
index 0000000..893501c
--- /dev/null
+++ b/package/pkg-perl.mk
@@ -0,0 +1,220 @@
+################################################################################
+# Perl package infrastructure
+#
+# This file implements an infrastructure that eases development of
+# package .mk files for Perl packages.
+#
+# See the Buildroot documentation for details on the usage of this
+# infrastructure
+#
+# In terms of implementation, this perl infrastructure requires
+# the .mk file to only specify metadata informations about the
+# package: name, version, download URL, etc.
+#
+# We still allow the package .mk file to override what the different
+# steps are doing, if needed. For example, if <PKG>_BUILD_CMDS is
+# already defined, it is used as the list of commands to perform to
+# build the package, instead of the default perl behaviour. The
+# package can also define some post operation hooks.
+#
+################################################################################
+
+_PERL_ARCHNAME = $(ARCH)-linux
+
+_HOST_PERL_ARCHNAME = $(shell perl -MConfig -e "print Config->{archname}")
+_HOST_PERL_INSTALL_BASE = $$(HOST_DIR)/usr
+_HOST_PERL5LIB = $(_HOST_PERL_INSTALL_BASE)/lib/perl5/$(_HOST_PERL_ARCHNAME):$(_HOST_PERL_INSTALL_BASE)/lib/perl5
+
+################################################################################
+# inner-perl-package -- defines how the configuration, compilation and
+# installation of an autotools package should be done, implements a
+# few hooks to tune the build process for autotools specifities and
+# calls the generic package infrastructure to generate the necessary
+# make targets
+#
+# argument 1 is the lowercase package name
+# argument 2 is the uppercase package name, including an HOST_ prefix
+# for host packages
+# argument 3 is the uppercase package name, without the HOST_ prefix
+# for host packages
+# argument 4 is the package directory prefix
+# argument 5 is the type (target or host)
+################################################################################
+
+define inner-perl-package
+
+$(2)_CONF_OPT ?=
+$(2)_BUILD_OPT ?=
+$(2)_INSTALL_OPT ?=
+$(2)_INSTALL_TARGET_OPT ?=
+$(2)_CLEAN_OPT ?=
+
+#
+# Configure step. Only define it if not already defined by the package
+# .mk file. And take care of the differences between host and target
+# packages.
+#
+ifndef $(2)_CONFIGURE_CMDS
+ifeq ($(5),target)
+
+# Configure package for target
+define $(2)_CONFIGURE_CMDS
+ cd $$($$(PKG)_SRCDIR) && if [ -f Build.PL ] ; then \
+ PERL5LIB=$(_HOST_PERL5LIB) \
+ perl Build.PL \
+ --config ar="$(TARGET_AR)" \
+ --config full_ar="$(TARGET_AR)" \
+ --config cc="$(TARGET_CC)" \
+ --config ccflags="$(TARGET_CFLAGS)" \
+ --config ld="$(TARGET_CC)" \
+ --config lddlflags="-shared $(TARGET_LDFLAGS)" \
+ --config ldflags="$(TARGET_LDFLAGS)" \
+ --include_dirs $$(STAGING_DIR)/usr/lib/perl5/$$(PERL_VERSION)/$(_PERL_ARCHNAME)/CORE \
+ --destdir $$(TARGET_DIR) \
+ --installdirs vendor \
+ --install_path lib=/usr/lib/perl5/site_perl/$$(PERL_VERSION) \
+ --install_path arch=/usr/lib/perl5/site_perl/$$(PERL_VERSION)/$(_PERL_ARCHNAME) \
+ --install_path bin=/usr/bin \
+ --install_path script=/usr/bin \
+ --install_path bindoc=/usr/share/man/man1 \
+ --install_path libdoc=/usr/share/man/man3 \
+ $$($(2)_CONF_OPT); \
+ else \
+ PERL5LIB=$(_HOST_PERL5LIB) \
+ PERL_AUTOINSTALL=--skipdeps \
+ perl Makefile.PL \
+ AR="$(TARGET_AR)" \
+ FULL_AR="$(TARGET_AR)" \
+ CC="$(TARGET_CC)" \
+ CCFLAGS="$(TARGET_CFLAGS)" \
+ LD="$(TARGET_CC)" \
+ LDDLFLAGS="-shared $(TARGET_LDFLAGS)" \
+ LDFLAGS="$(TARGET_LDFLAGS)" \
+ DESTDIR=$$(TARGET_DIR) \
+ INSTALLDIRS=vendor \
+ INSTALLVENDORLIB=/usr/lib/perl5/site_perl/$$(PERL_VERSION) \
+ INSTALLVENDORARCH=/usr/lib/perl5/site_perl/$$(PERL_VERSION)/$(_PERL_ARCHNAME) \
+ INSTALLVENDORBIN=/usr/bin \
+ INSTALLVENDORSCRIPT=/usr/bin \
+ INSTALLVENDORMAN1DIR=/usr/share/man/man1 \
+ INSTALLVENDORMAN3DIR=/usr/share/man/man3 \
+ $$($(2)_CONF_OPT); \
+ fi
+endef
+else
+
+# Configure package for host
+define $(2)_CONFIGURE_CMDS
+ cd $$($$(PKG)_SRCDIR) && if [ -f Build.PL ] ; then \
+ PERL5LIB=$(_HOST_PERL5LIB) \
+ perl Build.PL \
+ --install_base $(_HOST_PERL_INSTALL_BASE) \
+ --installdirs vendor \
+ $$($(2)_CONF_OPT); \
+ else \
+ PERL5LIB=$(_HOST_PERL5LIB) \
+ PERL_AUTOINSTALL=--skipdeps \
+ perl Makefile.PL \
+ INSTALL_BASE=$(_HOST_PERL_INSTALL_BASE) \
+ INSTALLDIRS=vendor \
+ $$($(2)_CONF_OPT); \
+ fi
+endef
+endif
+endif
+
+#
+# Build step. Only define it if not already defined by the package .mk
+# file. And take care of the differences between host and target
+# packages.
+#
+ifndef $(2)_BUILD_CMDS
+ifeq ($(5),target)
+
+# Build package for target
+define $(2)_BUILD_CMDS
+ cd $$($$(PKG)_SRCDIR) && if [ -f Build.PL ] ; then \
+ PERL5LIB=$(_HOST_PERL5LIB) \
+ perl Build $$($(2)_BUILD_OPT) build; \
+ else \
+ PERL5LIB=$(_HOST_PERL5LIB) \
+ $(MAKE1) \
+ PERL_INC=$$(STAGING_DIR)/usr/lib/perl5/$$(PERL_VERSION)/$(_PERL_ARCHNAME)/CORE \
+ $$($(2)_BUILD_OPT) pure_all; \
+ fi
+endef
+else
+
+# Build package for host
+define $(2)_BUILD_CMDS
+ cd $$($$(PKG)_SRCDIR) && if [ -f Build.PL ] ; then \
+ PERL5LIB=$(_HOST_PERL5LIB) \
+ perl Build $$($(2)_BUILD_OPT) build; \
+ else \
+ PERL5LIB=$(_HOST_PERL5LIB) \
+ $(MAKE1) $$($(2)_BUILD_OPT) pure_all; \
+ fi
+endef
+endif
+endif
+
+#
+# Host installation step. Only define it if not already defined by the
+# package .mk file.
+#
+ifndef $(2)_INSTALL_CMDS
+define $(2)_INSTALL_CMDS
+ cd $$($$(PKG)_SRCDIR) && if [ -f Build.PL ] ; then \
+ PERL5LIB=$(_HOST_PERL5LIB) \
+ perl Build $$($(2)_INSTALL_TARGET_OPT) install; \
+ else \
+ PERL5LIB=$(_HOST_PERL5LIB) \
+ $(MAKE1) $$($(2)_INSTALL_TARGET_OPT) pure_install; \
+ fi
+endef
+endif
+
+#
+# Target installation step. Only define it if not already defined by
+# the package .mk file.
+#
+ifndef $(2)_INSTALL_TARGET_CMDS
+define $(2)_INSTALL_TARGET_CMDS
+ cd $$($$(PKG)_SRCDIR) && if [ -f Build.PL ] ; then \
+ PERL5LIB=$(_HOST_PERL5LIB) \
+ perl Build $$($(2)_INSTALL_TARGET_OPT) install; \
+ else \
+ PERL5LIB=$(_HOST_PERL5LIB) \
+ $(MAKE1) $$($(2)_INSTALL_TARGET_OPT) pure_install; \
+ fi
+endef
+endif
+
+#
+# Clean step. Only define it if not already defined by
+# the package .mk file.
+#
+ifndef $(2)_CLEAN_CMDS
+define $(2)_CLEAN_CMDS
+ cd $$($$(PKG)_SRCDIR) && if [ -f Build.PL ] ; then \
+ PERL5LIB=$(_HOST_PERL5LIB) \
+ perl Build $$($(2)_CLEAN_OPT) clean; \
+ else \
+ PERL5LIB=$(_HOST_PERL5LIB) \
+ $(MAKE1) $$($(2)_CLEAN_OPT) clean; \
+ fi
+endef
+endif
+
+# Call the generic package infrastructure to generate the necessary
+# make targets
+$(call inner-generic-package,$(1),$(2),$(3),$(4),$(5))
+
+endef
+
+################################################################################
+# perl-package -- the target generator macro for Perl packages
+################################################################################
+
+perl-package = $(call inner-perl-package,$(call pkgname),$(call UPPERCASE,$(call pkgname)),$(call UPPERCASE,$(call pkgname)),$(call pkgparentdir),target)
+host-perl-package = $(call inner-perl-package,host-$(call pkgname),$(call UPPERCASE,host-$(call pkgname)),$(call UPPERCASE,$(call pkgname)),$(call pkgparentdir),host)
--
1.7.9.5
More information about the buildroot
mailing list