[Buildroot] [PATCH 2/2] configs: add RaspberryPi defconfig

Maxime Hadjinlian maxime.hadjinlian at gmail.com
Sun Jan 13 14:23:54 UTC 2013


This is a default configuration for the RaspberryPi, tested and functionnal.

The kernel used is the one developped by the RaspberryPi foundation as it's not
fully supported currently in mainline kernel.
The configuration used for the kernel is the default bcmrpi.

For more info, please find board/raspberrypi/README.txt

Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian at gmail.com>
---
 board/raspberrypi/README.txt |  127 ++++++++++++++++++++++++++++++++++++++++++
 configs/rpi_defconfig        |   19 +++++++
 2 files changed, 146 insertions(+)
 create mode 100644 board/raspberrypi/README.txt
 create mode 100644 configs/rpi_defconfig

diff --git a/board/raspberrypi/README.txt b/board/raspberrypi/README.txt
new file mode 100644
index 0000000..9825d92
--- /dev/null
+++ b/board/raspberrypi/README.txt
@@ -0,0 +1,127 @@
+##RaspberryPi
+
+Intro
+=====
+
+To be able to use your RaspberryPi board with the images generated by
+Buildroot, you have a prior choice to make, will you use:
+    - Volatile rootfs in RAM (The rootfs is an initramfs)
+    - Persistent rootfs on the SDCard
+
+Also, a good source of information is http://elinux.org/R-Pi_Hub
+
+Volatile rootfs
+===============
+
+How to build it
+---------------
+
+You need to use the rpi_defconfig, to do so:
+ * make rpi_defconfig
+
+Then, you need to select the kind of images you want:
+ * make menuconfig
+ * Select "Filesystem images"
+ * Select "initial RAM filesystem linked into linux kernel"
+
+What is generated
+-----------------
+
+After building, you should obtain this tree:
+
+    output/images/
+    +-- rootfs.tar
+    +-- rpi-firmware
+    |   +-- bootcode.bin
+    |   +-- config.txt
+    |   +-- fixup_cd.dat
+    |   +-- fixup.dat
+    |   +-- start_cd.elf
+    |   `-- start.elf
+    `-- zImage
+
+Note : rootfs.tar will only be there if you kept "tar the root filesystem"
+option selected in "Filesystem images".
+
+Where should the binaries be copied on the SDCard
+-------------------------------------------------
+
+Your SDCard must have its first partition using fat32 and with bootable flags.
+
+At the root of the partition, the RaspberryPi must find the following files:
+
+ * bootcode.bin
+ * config.txt
+ * fixup_cd.dat
+ * fixup.dat
+ * start_cd.elf
+ * start.elf
+ * zImage
+
+So you should, copy the entire content of output/images/rpi-firmware along with
+zImage.
+
+Note : You can create any number of partitions you desire, the only requirement
+is that the first partition must be using fat32.
+
+Persistent rootfs
+==================
+
+How to build it
+---------------
+
+You only need to use the rpi_defconfig, to do so:
+ * make rpi_defconfig
+
+What is generated
+-----------------
+
+After building, you should obtain this tree:
+
+    output/images/
+    +-- rootfs.tar
+    +-- rpi-firmware
+    |   +-- bootcode.bin
+    |   +-- config.txt
+    |   +-- fixup_cd.dat
+    |   +-- fixup.dat
+    |   +-- start_cd.elf
+    |   `-- start.elf
+    `-- zImage
+
+Where should the binaries be copied on the SDCard
+-------------------------------------------------
+
+Your SDCard must have its first partition using fat32 and with bootable flags.
+It should also have another partition which will contain your rootfs, it should
+be partitioned as ext4.
+
+Boot partition
+~~~~~~~~~~~~
+
+The first partition will contain everything used to boot the RaspberryPi.
+You must copy theses files at the root of partition:
+
+ * bootcode.bin
+ * config.txt
+ * fixup_cd.dat
+ * fixup.dat
+ * start_cd.elf
+ * start.elf
+ * zImage
+
+So you should, copy the entire content of output/images/rpi-firmware along with
+zImage.
+
+Rootfs partition
+~~~~~~~~~~~~~~
+
+The second partition, will contain your rootfs.
+Simply extract (as root!) the contents of the rootfs.tar archive
+into this partition.
+
+For example: (Assuming mountpoint is a directory and exist)
+
+ $ sudo mount /dev/sdXY /mnt/mountpoint
+ $ sudo tar xf rootfs.tar -C /mnt/mountpoint
+
diff --git a/configs/rpi_defconfig b/configs/rpi_defconfig
new file mode 100644
index 0000000..8c73d0e
--- /dev/null
+++ b/configs/rpi_defconfig
@@ -0,0 +1,19 @@
+BR2_arm=y
+BR2_arm1176jzf_s=y
+
+BR2_TOOLCHAIN_BUILDROOT_LARGEFILE=y
+BR2_TOOLCHAIN_BUILDROOT_CXX=y
+
+BR2_TARGET_GENERIC_GETTY_PORT="tty1"
+
+BR2_PACKAGE_RPI_FIRMWARE=y
+BR2_PACKAGE_RPI_USERLAND=y
+BR2_PACKAGE_LIBCOFI=y
+
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_GIT=y
+BR2_LINUX_KERNEL_CUSTOM_GIT_REPO_URL="git://github.com/raspberrypi/linux.git"
+BR2_LINUX_KERNEL_CUSTOM_GIT_VERSION="31a951046155b27361127d9cf85a1f58719fe9b3"
+BR2_LINUX_KERNEL_USE_DEFCONFIG=y
+BR2_LINUX_KERNEL_DEFCONFIG="bcmrpi"
+BR2_LINUX_KERNEL_ZIMAGE=y
-- 
1.7.10.4



More information about the buildroot mailing list