[Buildroot] [PATCH 2/3] rpi-userland: new package
Maxime Hadjinlian
maxime.hadjinlian at gmail.com
Sun Jan 6 22:13:48 UTC 2013
On Sun, Jan 6, 2013 at 11:09 PM, Peter Korsgaard <jacmet at uclibc.org> wrote:
>>>>>> "Maxime" == Maxime Hadjinlian <maxime.hadjinlian at gmail.com> writes:
>
> Maxime> Introducing a package to build the userland part of the Raspberry,
> Maxime> needed by anyone who would want to build a rootfs for a RaspberryPi.
>
> Presumably it isn't REALLY needed, right? Only if you want to use the
> GPU?
I actually don't know if you could do without it since the rpi only
video output is the HDMI.
I'll have to check about that.
>
> Maxime> Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian at gmail.com>
> Maxime> ---
> Maxime> package/Config.in | 1 +
> Maxime> package/rpi-userland/Config.in | 18 +++++
> Maxime> ...0002-Test-for-the-existence-of-execinfo-h.patch | 69 ++++++++++++++++++++
> Maxime> ...make-vmcs.cmake-allow-to-override-VMCS_IN.patch | 26 ++++++++
> Maxime> package/rpi-userland/rpi-userland.mk | 20 ++++++
> Maxime> 5 files changed, 134 insertions(+)
> Maxime> create mode 100644 package/rpi-userland/Config.in
> Maxime> create mode 100644 package/rpi-userland/rpi-userland-0002-Test-for-the-existence-of-execinfo-h.patch
> Maxime> create mode 100644 package/rpi-userland/rpi-userland-makefiles-0001-cmake-vmcs.cmake-allow-to-override-VMCS_IN.patch
> Maxime> create mode 100644 package/rpi-userland/rpi-userland.mk
>
> Maxime> diff --git a/package/Config.in b/package/Config.in
> Maxime> index 9b50f4b..17205fe 100644
> Maxime> --- a/package/Config.in
> Maxime> +++ b/package/Config.in
> Maxime> @@ -580,6 +580,7 @@ source "package/collectd/Config.in"
> Maxime> source "package/empty/Config.in"
> Maxime> source "package/googlefontdirectory/Config.in"
> Maxime> source "package/mobile-broadband-provider-info/Config.in"
> Maxime> +source "package/rpi-userland/Config.in"
>
> I think 'hardware handling' makes more sense, so I've moved it there
> instead.
>
> Maxime> source "package/shared-mime-info/Config.in"
> Maxime> source "package/snowball-init/Config.in"
> Maxime> source "package/sound-theme-borealis/Config.in"
> Maxime> diff --git a/package/rpi-userland/Config.in b/package/rpi-userland/Config.in
> Maxime> new file mode 100644
> Maxime> index 0000000..646d74e
> Maxime> --- /dev/null
> Maxime> +++ b/package/rpi-userland/Config.in
> Maxime> @@ -0,0 +1,18 @@
> Maxime> +config BR2_PACKAGE_RPI_USERLAND
> Maxime> + bool "RaspberryPi userland"
>
> We normally keep the name short and lower case, so I've renamed to
> 'rpi-userland'.
>
> Maxime> + depends on BR2_INSTALL_LIBSTDCPP
> Maxime> + depends on BR2_LARGEFILE
> Maxime> + help
> Maxime> + Raspberry Pi Userland contains the necessary library to use the
> Maxime> + VideoCore driver.
> Maxime> +
> Maxime> + Includes source for the ARM side code to interface to:
>
> Trailing spaces.
>
> Maxime> + EGL, mmal, GLESv2, vcos, openmaxil, vchiq_arm, bcm_host, WFC, OpenVG.
> Maxime> +
> Maxime> + https://github.com/raspberrypi/userland/
> Maxime> +
> Maxime> +comment "RaspberryPi userland requires a toolchain with C++ support enabled"
> Maxime> + depends on !BR2_INSTALL_LIBSTDCPP
> Maxime> +
> Maxime> +comment "RaspberryPi userland requires a toolchain with LARGEFILE support"
> Maxime> + depends on !BR2_LARGEFILE
>
> I've merged these two comments.
>
> Committed with those changes, thanks.
>
> --
> Bye, Peter Korsgaard
More information about the buildroot
mailing list