[Buildroot] How to create a Bootable SD-Card for i.MX28 EVK
Tobias Sachs
Tobias.Sachs at onlinehome.de
Fri May 4 20:47:11 UTC 2012
Hello,
I started one week ago with configuring an Kernel/Linux Image for my
i.MX28 EVK for the first test I keep the original configurations except
the following.
As target Architecture I choose "ARM (little endian)"
As Target Architecture Variant I use "arm926t"
In my Toolchain I ticked on "large file (files > 2 GB) support" an
"WCHAR support"
In the System configuration i use "Dynamic using udev" as "/dev management"
As Kernel defconfig I use "mxs"
In Filesystem images I use "ext2 root filesystem"
With these configuration the "make" goes through wihout any errors und
gave me a "uimage" und a "rootfs.ext2" as output. But how do i create a
bootable SD-Card with my created uimage and rootfs.ext2?
With LTIB I can use "mk_mx28_sd.sh" and "mk_hdr.sh" but these Scripts
need a "imx28_linux.sb" In the mail archives I've read about a patch to
create these .sb files with buildroot but where do I find these patch
and how do I apply it?
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
Another Question when I select U-Boot as Bootloader I have to add a
"U-Boot board name" but I can't find which names I could use if I try
"mxs" I get only the error listed below.
libtool: install: warning: remember to run `libtool --finish /usr/lib'
libtool: install: warning: remember to run `libtool --finish /usr/lib'
make: *** No rule to make target `mxs_config'. Stop.
make[1]: *** [mxs_config] Error 1
make: ***
[/home/freescale/Documents/imx28/buildroot/output/build/uboot-2012.04.01/.stamp_configured]
Error 2
Many Thanks
More information about the buildroot
mailing list