[Buildroot] [PATCH] package read-edid, corrected patch

[Dimitry Golubovsky]

Hi,
Here is the updated patch per comments by Thomas and Baruch.

Thanks.

Signed-off-by: Dmitry Golubovsky <golubovsky at gmail.com>
---
diff --git a/package/Config.in b/package/Config.in
index caa618b..e39fccf 100644
--- a/package/Config.in
+++ b/package/Config.in
@@ -210,6 +210,7 @@ source "package/openocd/Config.in"
 source "package/parted/Config.in"
 source "package/pciutils/Config.in"
 source "package/picocom/Config.in"
+source "package/read-edid/Config.in"
 source "package/rng-tools/Config.in"
 source "package/sane-backends/Config.in"
 source "package/sdparm/Config.in"
diff --git a/package/read-edid/Config.in b/package/read-edid/Config.in
new file mode 100644
index 0000000..c66a5e0
--- /dev/null
+++ b/package/read-edid/Config.in
@@ -0,0 +1,15 @@
+config BR2_PACKAGE_READ_EDID
+	bool "read-edid"
+	help
+	  Read-edid is a pair of tools (originally by John Fremlin) for
reading the EDID
+	  from a monitor.  It should work with most monitors made since 1996
(except for
+	  newer ones with 256-byte EDID's - WiP),  assuming the video card
supports  the
+	  standard read commands (most do).  Read-edid is a set of two tools
- get-edid,
+	  which gets  the raw edid  information from the monitor,  and
parse-edid, which
+	  turns the raw binary information into an XF86Config-compatible
monitor section.
+
+	  http://polypux.org/projects/read-edid/
+
+depends on (BR2_i386)
+
+
diff --git a/package/read-edid/read-edid.mk b/package/read-edid/read-edid.mk
new file mode 100644
index 0000000..6328def
--- /dev/null
+++ b/package/read-edid/read-edid.mk
@@ -0,0 +1,20 @@
+############################################
+#
+# read-edid
+#
+############################################
+
+READ_EDID_VERSION = 1.4.2
+READ_EDID_SITE = http://www.polypux.org/projects/read-edid/
+
+define READ_EDID_BUILD_CMDS
+	$(MAKE) $(TARGET_CONFIGURE_OPTS) -C $(@D)
+endef
+
+define READ_EDID_INSTALL_TARGET_CMDS
+	$(INSTALL) -D -m 0755 $(@D)/get-edid $(TARGET_DIR)/sbin/get-edid
+	$(INSTALL) -D -m 0755 $(@D)/parse-edid $(TARGET_DIR)/sbin/parse-edid
+endef
+
+$(eval $(call AUTOTARGETS))
+


--