[Buildroot] [PATCH 07/13] Split Makefile.package.in in pkg-download.mk, pkg-utils.mk and pkg-gentargets.mk
Thomas De Schampheleire
patrickdepinguin+buildroot at gmail.com
Fri Mar 9 06:40:47 UTC 2012
On Wed, Mar 7, 2012 at 8:34 PM, Thomas Petazzoni
<thomas.petazzoni at free-electrons.com> wrote:
> Signed-off-by: Thomas Petazzoni <thomas.petazzoni at free-electrons.com>
Acked-by: Thomas De Schampheleire <thomas.de.schampheleire at gmail.com>
> ---
> package/Makefile.in | 4 +-
> package/Makefile.package.in | 746 -------------------------------------------
> package/pkg-download.mk | 212 ++++++++++++
> package/pkg-gentargets.mk | 458 ++++++++++++++++++++++++++
> package/pkg-utils.mk | 72 +++++
> 5 files changed, 745 insertions(+), 747 deletions(-)
> delete mode 100644 package/Makefile.package.in
> create mode 100644 package/pkg-download.mk
> create mode 100644 package/pkg-gentargets.mk
> create mode 100644 package/pkg-utils.mk
>
> diff --git a/package/Makefile.in b/package/Makefile.in
> index 5f0d00a..4f72864 100644
> --- a/package/Makefile.in
> +++ b/package/Makefile.in
> @@ -298,6 +298,8 @@ else
> SHARED_STATIC_LIBS_OPTS=--enable-static --enable-shared
> endif
>
> +include package/pkg-utils.mk
> +include package/pkg-download.mk
> include package/pkg-autotargets.mk
> include package/pkg-cmaketargets.mk
> -include package/Makefile.package.in
> +include package/pkg-gentargets.mk
> diff --git a/package/Makefile.package.in b/package/Makefile.package.in
> deleted file mode 100644
> index 59adce1..0000000
> --- a/package/Makefile.package.in
> +++ /dev/null
> @@ -1,746 +0,0 @@
> -################################################################################
> -# Generic package infrastructure
> -#
> -# This file implements an infrastructure that eases development of
> -# package .mk files. It should be used for all non-autotools based
> -# packages. Autotools-based packages should use the specialized
> -# autotools infrastructure in package/Makefile.autotools.in.
> -#
> -# See the Buildroot documentation for details on the usage of this
> -# infrastructure
> -#
> -# In terms of implementation, this generic infrastructure requires the
> -# .mk file to specify:
> -#
> -# 1. Metadata informations about the package: name, version,
> -# download URL, etc.
> -#
> -# 2. Description of the commands to be executed to configure, build
> -# and install the package
> -#
> -# The autotools infrastructure specializes this generic infrastructure
> -# by already implementing the configure, build and install steps.
> -################################################################################
> -
> -# UPPERCASE Macro -- transform its argument to uppercase and replace dots and
> -# hyphens to underscores
> -
> -# Heavily inspired by the up macro from gmsl (http://gmsl.sf.net)
> -# This is approx 5 times faster than forking a shell and tr, and
> -# as this macro is used a lot it matters
> -# This works by creating translation character pairs (E.G. a:A b:B)
> -# and then looping though all of them running $(subst from,to,text)
> -[FROM] := a b c d e f g h i j k l m n o p q r s t u v w x y z . -
> -[TO] := A B C D E F G H I J K L M N O P Q R S T U V W X Y Z _ _
> -
> -UPPERCASE = $(strip $(eval __tmp := $1) \
> - $(foreach c, $(join $(addsuffix :,$([FROM])),$([TO])), \
> - $(eval __tmp := \
> - $(subst $(word 1,$(subst :, ,$c)),$(word 2,$(subst :, ,$c)),\
> - $(__tmp)))) \
> - $(__tmp))
> -
> -define KCONFIG_ENABLE_OPT
> - $(SED) "/\\<$(1)\\>/d" $(2)
> - echo "$(1)=y" >> $(2)
> -endef
> -
> -define KCONFIG_SET_OPT
> - $(SED) "/\\<$(1)\\>/d" $(3)
> - echo "$(1)=$(2)" >> $(3)
> -endef
> -
> -define KCONFIG_DISABLE_OPT
> - $(SED) "/\\<$(1)\\>/d" $(2)
> - echo "# $(1) is not set" >> $(2)
> -endef
> -
> -# Helper functions to determine the name of a package and its
> -# directory from its makefile directory, using the $(MAKEFILE_LIST)
> -# variable provided by make. This is used by the *TARGETS macros to
> -# automagically find where the package is located. Note that the
> -# pkgdir macro is carefully written to handle the case of the Linux
> -# package, for which the package directory is an empty string.
> -define pkgdir
> -$(dir $(lastword $(MAKEFILE_LIST)))
> -endef
> -
> -define pkgname
> -$(lastword $(subst /, ,$(call pkgdir)))
> -endef
> -
> -define pkgparentdir
> -$(patsubst %$(call pkgname)/,%,$(call pkgdir))
> -endef
> -
> -# Define extractors for different archive suffixes
> -INFLATE.bz2 = $(BZCAT)
> -INFLATE.gz = $(ZCAT)
> -INFLATE.tbz = $(BZCAT)
> -INFLATE.tbz2 = $(BZCAT)
> -INFLATE.tgz = $(ZCAT)
> -INFLATE.xz = $(XZCAT)
> -INFLATE.tar = cat
> -
> -# MESSAGE Macro -- display a message in bold type
> -MESSAGE = echo "$(TERM_BOLD)>>> $($(PKG)_NAME) $($(PKG)_VERSION) $(1)$(TERM_RESET)"
> -TERM_BOLD := $(shell tput smso)
> -TERM_RESET := $(shell tput rmso)
> -
> -# Download method commands
> -WGET:=$(call qstrip,$(BR2_WGET)) $(QUIET)
> -SVN:=$(call qstrip,$(BR2_SVN))
> -BZR:=$(call qstrip,$(BR2_BZR))
> -GIT:=$(call qstrip,$(BR2_GIT))
> -HG:=$(call qstrip,$(BR2_HG)) $(QUIET)
> -SCP:=$(call qstrip,$(BR2_SCP)) $(QUIET)
> -SSH:=$(call qstrip,$(BR2_SSH)) $(QUIET)
> -LOCALFILES:=$(call qstrip,$(BR2_LOCALFILES))
> -
> -# Default spider mode is 'DOWNLOAD'. Other possible values are 'SOURCE_CHECK'
> -# used by the _source-check target and 'SHOW_EXTERNAL_DEPS', used by the
> -# external-deps target.
> -DL_MODE=DOWNLOAD
> -
> -DL_DIR=$(call qstrip,$(BR2_DL_DIR))
> -ifeq ($(DL_DIR),)
> -DL_DIR:=$(TOPDIR)/dl
> -endif
> -
> -#
> -# URI scheme helper functions
> -# Example URIs:
> -# * http://www.example.com/dir/file
> -# * scp://www.example.com:dir/file (with domainseparator :)
> -#
> -# geturischeme: http
> -geturischeme=$(firstword $(subst ://, ,$(call qstrip,$(1))))
> -# stripurischeme: www.example.com/dir/file
> -stripurischeme=$(lastword $(subst ://, ,$(call qstrip,$(1))))
> -# domain: www.example.com
> -domain=$(firstword $(subst $(call domainseparator,$(2)), ,$(call stripurischeme,$(1))))
> -# notdomain: dir/file
> -notdomain=$(patsubst $(call domain,$(1),$(2))$(call domainseparator,$(2))%,%,$(call stripurischeme,$(1)))
> -#
> -# default domainseparator is /, specify alternative value as first argument
> -domainseparator=$(if $(1),$(1),/)
> -
> -################################################################################
> -# The DOWNLOAD_{GIT,SVN,BZR,HG,LOCALFILES} helpers are in charge of getting a
> -# working copy of the source repository for their corresponding SCM,
> -# checking out the requested version / commit / tag, and create an
> -# archive out of it. DOWNLOAD_SCP uses scp to obtain a remote file with
> -# ssh authentication. DOWNLOAD_WGET is the normal wget-based download
> -# mechanism.
> -#
> -# The SOURCE_CHECK_{GIT,SVN,BZR,HG,WGET,LOCALFILES,SCP} helpers are in charge of
> -# simply checking that the source is available for download. This can be used
> -# to make sure one will be able to get all the sources needed for
> -# one's build configuration.
> -#
> -# The SHOW_EXTERNAL_DEPS_{GIT,SVN,BZR,HG,WGET,LOCALFILES,SCP} helpers simply
> -# output to the console the names of the files that will be downloaded, or path
> -# and revision of the source repositories, producing a list of all the
> -# "external dependencies" of a given build configuration.
> -################################################################################
> -
> -define DOWNLOAD_GIT
> - test -e $(DL_DIR)/$($(PKG)_SOURCE) || \
> - (pushd $(DL_DIR) > /dev/null && \
> - $(GIT) clone --bare $($(PKG)_SITE) $($(PKG)_BASE_NAME) && \
> - pushd $($(PKG)_BASE_NAME) > /dev/null && \
> - $(GIT) archive --format=tar --prefix=$($(PKG)_BASE_NAME)/ $($(PKG)_DL_VERSION) | \
> - gzip -c > $(DL_DIR)/$($(PKG)_SOURCE) && \
> - popd > /dev/null && \
> - rm -rf $($(PKG)_DL_DIR) && \
> - popd > /dev/null)
> -endef
> -
> -# TODO: improve to check that the given PKG_DL_VERSION exists on the remote
> -# repository
> -define SOURCE_CHECK_GIT
> - $(GIT) ls-remote --heads $($(PKG)_SITE) > /dev/null
> -endef
> -
> -define SHOW_EXTERNAL_DEPS_GIT
> - echo $($(PKG)_SOURCE)
> -endef
> -
> -
> -define DOWNLOAD_BZR
> - test -e $(DL_DIR)/$($(PKG)_SOURCE) || \
> - $(BZR) export $(DL_DIR)/$($(PKG)_SOURCE) $($(PKG)_SITE) -r $($(PKG)_DL_VERSION)
> -endef
> -
> -define SOURCE_CHECK_BZR
> - $(BZR) ls --quiet $($(PKG)_SITE) > /dev/null
> -endef
> -
> -define SHOW_EXTERNAL_DEPS_BZR
> - echo $($(PKG)_SOURCE)
> -endef
> -
> -
> -define DOWNLOAD_SVN
> - test -e $(DL_DIR)/$($(PKG)_SOURCE) || \
> - (pushd $(DL_DIR) > /dev/null && \
> - $(SVN) export -r $($(PKG)_DL_VERSION) $($(PKG)_SITE) $($(PKG)_DL_DIR) && \
> - $(TAR) czf $($(PKG)_SOURCE) $($(PKG)_BASE_NAME)/ && \
> - rm -rf $($(PKG)_DL_DIR) && \
> - popd > /dev/null)
> -endef
> -
> -define SOURCE_CHECK_SVN
> - $(SVN) ls $($(PKG)_SITE) > /dev/null
> -endef
> -
> -define SHOW_EXTERNAL_DEPS_SVN
> - echo $($(PKG)_SOURCE)
> -endef
> -
> -# SCP URIs should be of the form scp://[user@]host:filepath
> -# Note that filepath is relative to the user's home directory, so you may want
> -# to prepend the path with a slash: scp://[user@]host:/absolutepath
> -define DOWNLOAD_SCP
> - test -e $(DL_DIR)/$(2) || \
> - $(SCP) $(call stripurischeme,$(call qstrip,$(1)))/$(2) $(DL_DIR)
> -endef
> -
> -define SOURCE_CHECK_SCP
> - $(SSH) $(call domain,$(1),:) ls $(call notdomain,$(1)/$(2),:) > /dev/null
> -endef
> -
> -define SHOW_EXTERNAL_DEPS_SCP
> - echo $(2)
> -endef
> -
> -
> -define DOWNLOAD_HG
> - test -e $(DL_DIR)/$($(PKG)_SOURCE) || \
> - (pushd $(DL_DIR) > /dev/null && \
> - $(HG) clone --noupdate --rev $($(PKG)_DL_VERSION) $($(PKG)_SITE) $($(PKG)_BASE_NAME) && \
> - $(HG) archive --repository $($(PKG)_BASE_NAME) --type tgz --prefix $($(PKG)_BASE_NAME)/ \
> - --rev $($(PKG)_DL_VERSION) $(DL_DIR)/$($(PKG)_SOURCE) && \
> - rm -rf $($(PKG)_DL_DIR) && \
> - popd > /dev/null)
> -endef
> -
> -# TODO: improve to check that the given PKG_DL_VERSION exists on the remote
> -# repository
> -define SOURCE_CHECK_HG
> - $(HG) incoming --force -l1 $($(PKG)_SITE) > /dev/null
> -endef
> -
> -define SHOW_EXTERNAL_DEPS_HG
> - echo $($(PKG)_SOURCE)
> -endef
> -
> -# Download a file using wget. Only download the file if it doesn't
> -# already exist in the download directory. If the download fails,
> -# remove the file (because wget -O creates a 0-byte file even if the
> -# download fails).
> -define DOWNLOAD_WGET
> - test -e $(DL_DIR)/$(2) || \
> - $(WGET) -O $(DL_DIR)/$(2) $(call qstrip,$(1))/$(2) || \
> - (rm -f $(DL_DIR)/$(2) ; exit 1)
> -endef
> -
> -define SOURCE_CHECK_WGET
> - $(WGET) --spider $(call qstrip,$(1))/$(2)
> -endef
> -
> -define SHOW_EXTERNAL_DEPS_WGET
> - echo $(2)
> -endef
> -
> -define DOWNLOAD_LOCALFILES
> - test -e $(DL_DIR)/$($(PKG)_SOURCE) || \
> - $(LOCALFILES) $(call qstrip,$(subst file://,,$($(PKG)_SITE)))/$($(PKG)_SOURCE) $(DL_DIR)
> -endef
> -
> -define SOURCE_CHECK_LOCALFILES
> - test -e $(call qstrip,$(subst file://,,$($(PKG)_SITE)))/$($(PKG)_SOURCE)
> -endef
> -
> -define SHOW_EXTERNAL_DEPS_LOCALFILES
> - echo $($(PKG)_SITE)/$($(PKG)_SOURCE)
> -endef
> -
> -################################################################################
> -# DOWNLOAD -- Download helper. Will try to download source from:
> -# 1) BR2_PRIMARY_SITE if enabled
> -# 2) Download site
> -# 3) BR2_BACKUP_SITE if enabled
> -#
> -# Argument 1 is the source location
> -# Argument 2 is the source filename
> -#
> -# E.G. use like this:
> -# $(call DOWNLOAD,$(FOO_SITE),$(FOO_SOURCE))
> -################################################################################
> -
> -define DOWNLOAD
> - $(Q)if test -n "$(call qstrip,$(BR2_PRIMARY_SITE))" ; then \
> - case "$(call geturischeme,$(BR2_PRIMARY_SITE))" in \
> - scp) $(call $(DL_MODE)_SCP,$(BR2_PRIMARY_SITE),$(2)) && exit ;; \
> - *) $(call $(DL_MODE)_WGET,$(BR2_PRIMARY_SITE),$(2)) && exit ;; \
> - esac ; \
> - fi ; \
> - if test -n "$(1)" ; then \
> - case "$($(PKG)_SITE_METHOD)" in \
> - git) $($(DL_MODE)_GIT) && exit ;; \
> - svn) $($(DL_MODE)_SVN) && exit ;; \
> - bzr) $($(DL_MODE)_BZR) && exit ;; \
> - file) $($(DL_MODE)_LOCALFILES) && exit ;; \
> - scp) $($(DL_MODE)_SCP) && exit ;; \
> - hg) $($(DL_MODE)_HG) && exit ;; \
> - *) $(call $(DL_MODE)_WGET,$(1),$(2)) && exit ;; \
> - esac ; \
> - fi ; \
> - if test -n "$(call qstrip,$(BR2_BACKUP_SITE))" ; then \
> - $(call $(DL_MODE)_WGET,$(BR2_BACKUP_SITE),$(2)) && exit ; \
> - fi ; \
> - exit 1
> -endef
> -
> -# Needed for the foreach loops to loop over the list of hooks, so that
> -# each hook call is properly separated by a newline.
> -define sep
> -
> -
> -endef
> -
> -################################################################################
> -# Implicit targets -- produce a stamp file for each step of a package build
> -################################################################################
> -
> -# Retrieve the archive
> -$(BUILD_DIR)/%/.stamp_downloaded:
> -ifeq ($(DL_MODE),DOWNLOAD)
> -# Only show the download message if it isn't already downloaded
> - $(Q)(test -e $(DL_DIR)/$($(PKG)_SOURCE) && \
> - (test -z $($(PKG)_PATCH) || test -e $(DL_DIR)$($(PKG)_PATCH))) || \
> - $(call MESSAGE,"Downloading")
> -endif
> - $(if $($(PKG)_SOURCE),$(call DOWNLOAD,$($(PKG)_SITE),$($(PKG)_SOURCE)))
> - $(if $($(PKG)_PATCH),$(call DOWNLOAD,$($(PKG)_SITE),$($(PKG)_PATCH)))
> - $(foreach hook,$($(PKG)_POST_DOWNLOAD_HOOKS),$(call $(hook))$(sep))
> -ifeq ($(DL_MODE),DOWNLOAD)
> - $(Q)mkdir -p $(@D)
> - $(Q)touch $@
> -endif
> -
> -# Unpack the archive
> -$(BUILD_DIR)/%/.stamp_extracted:
> - @$(call MESSAGE,"Extracting")
> - $(Q)mkdir -p $(@D)
> - $($(PKG)_EXTRACT_CMDS)
> -# some packages have messed up permissions inside
> - $(Q)chmod -R +rw $(@D)
> - $(foreach hook,$($(PKG)_POST_EXTRACT_HOOKS),$(call $(hook))$(sep))
> - $(Q)touch $@
> -
> -# Rsync the source directory if the <pkg>_OVERRIDE_SRCDIR feature is
> -# used.
> -$(BUILD_DIR)/%/.stamp_rsynced:
> - @$(call MESSAGE,"Syncing from source dir $(SRCDIR)")
> - @test -d $(SRCDIR) || (echo "ERROR: $(SRCDIR) does not exist" ; exit 1)
> - rsync -au $(SRCDIR)/ $(@D)
> - $(Q)touch $@
> -
> -# Handle the SOURCE_CHECK and SHOW_EXTERNAL_DEPS cases for rsynced
> -# packages
> -$(BUILD_DIR)/%/.stamp_rsync_sourced:
> -ifeq ($(DL_MODE),SOURCE_CHECK)
> - test -d $(SRCDIR)
> -else ifeq ($(DL_MODE),SHOW_EXTERNAL_DEPS)
> - echo "file://$(SRCDIR)"
> -else
> - @true # Nothing to do to source a local package
> -endif
> -
> -# Patch
> -#
> -# The RAWNAME variable is the lowercased package name, which allows to
> -# find the package directory (typically package/<pkgname>) and the
> -# prefix of the patches
> -$(BUILD_DIR)/%/.stamp_patched: NAMEVER = $(RAWNAME)-$($(PKG)_VERSION)
> -$(BUILD_DIR)/%/.stamp_patched:
> - @$(call MESSAGE,"Patching $($(PKG)_DIR_PREFIX)/$(RAWNAME)")
> - $(foreach hook,$($(PKG)_PRE_PATCH_HOOKS),$(call $(hook))$(sep))
> - $(if $($(PKG)_PATCH),support/scripts/apply-patches.sh $(@D) $(DL_DIR) $($(PKG)_PATCH))
> - $(Q)( \
> - if test -d $($(PKG)_DIR_PREFIX)/$(RAWNAME); then \
> - if test "$(wildcard $($(PKG)_DIR_PREFIX)/$(RAWNAME)/$(NAMEVER)*.patch*)"; then \
> - support/scripts/apply-patches.sh $(@D) $($(PKG)_DIR_PREFIX)/$(RAWNAME) $(NAMEVER)\*.patch $(NAMEVER)\*.patch.$(ARCH) || exit 1; \
> - else \
> - support/scripts/apply-patches.sh $(@D) $($(PKG)_DIR_PREFIX)/$(RAWNAME) $(RAWNAME)\*.patch $(RAWNAME)\*.patch.$(ARCH) || exit 1; \
> - if test -d $($(PKG)_DIR_PREFIX)/$(RAWNAME)/$(NAMEVER); then \
> - support/scripts/apply-patches.sh $(@D) $($(PKG)_DIR_PREFIX)/$(RAWNAME)/$(NAMEVER) \*.patch \*.patch.$(ARCH) || exit 1; \
> - fi; \
> - fi; \
> - fi; \
> - )
> - $(foreach hook,$($(PKG)_POST_PATCH_HOOKS),$(call $(hook))$(sep))
> - $(Q)touch $@
> -
> -# Configure
> -$(BUILD_DIR)/%/.stamp_configured:
> - $(foreach hook,$($(PKG)_PRE_CONFIGURE_HOOKS),$(call $(hook))$(sep))
> - @$(call MESSAGE,"Configuring")
> - $($(PKG)_CONFIGURE_CMDS)
> - $(foreach hook,$($(PKG)_POST_CONFIGURE_HOOKS),$(call $(hook))$(sep))
> - $(Q)touch $@
> -
> -# Build
> -$(BUILD_DIR)/%/.stamp_built::
> - @$(call MESSAGE,"Building")
> - $($(PKG)_BUILD_CMDS)
> - $(foreach hook,$($(PKG)_POST_BUILD_HOOKS),$(call $(hook))$(sep))
> - $(Q)touch $@
> -
> -# Install to host dir
> -$(BUILD_DIR)/%/.stamp_host_installed:
> - @$(call MESSAGE,"Installing to host directory")
> - $($(PKG)_INSTALL_CMDS)
> - $(foreach hook,$($(PKG)_POST_INSTALL_HOOKS),$(call $(hook))$(sep))
> - $(Q)touch $@
> -
> -# Install to staging dir
> -$(BUILD_DIR)/%/.stamp_staging_installed:
> - @$(call MESSAGE,"Installing to staging directory")
> - $($(PKG)_INSTALL_STAGING_CMDS)
> - $(foreach hook,$($(PKG)_POST_INSTALL_STAGING_HOOKS),$(call $(hook))$(sep))
> - $(Q)touch $@
> -
> -# Install to images dir
> -$(BUILD_DIR)/%/.stamp_images_installed:
> - @$(call MESSAGE,"Installing to images directory")
> - $($(PKG)_INSTALL_IMAGES_CMDS)
> - $(foreach hook,$($(PKG)_POST_INSTALL_IMAGES_HOOKS),$(call $(hook))$(sep))
> - $(Q)touch $@
> -
> -# Install to target dir
> -$(BUILD_DIR)/%/.stamp_target_installed:
> - @$(call MESSAGE,"Installing to target")
> - $($(PKG)_INSTALL_TARGET_CMDS)
> - $(foreach hook,$($(PKG)_POST_INSTALL_TARGET_HOOKS),$(call $(hook))$(sep))
> - $(Q)touch $@
> -
> -# Clean package
> -$(BUILD_DIR)/%/.stamp_cleaned:
> - @$(call MESSAGE,"Cleaning up")
> - $($(PKG)_CLEAN_CMDS)
> - rm -f $(@D)/.stamp_built
> -
> -# Uninstall package from target and staging
> -# Uninstall commands tend to fail, so remove the stamp files first
> -$(BUILD_DIR)/%/.stamp_uninstalled:
> - @$(call MESSAGE,"Uninstalling")
> - rm -f $($(PKG)_TARGET_INSTALL_STAGING)
> - rm -f $($(PKG)_TARGET_INSTALL_TARGET)
> - $($(PKG)_UNINSTALL_STAGING_CMDS)
> - $($(PKG)_UNINSTALL_TARGET_CMDS)
> -
> -# Remove package sources
> -$(BUILD_DIR)/%/.stamp_dircleaned:
> - rm -Rf $(@D)
> -
> -################################################################################
> -# GENTARGETS_INNER -- generates the make targets needed to build a
> -# generic package
> -#
> -# argument 1 is the lowercase package name
> -# argument 2 is the uppercase package name, including an HOST_ prefix
> -# for host packages
> -# argument 3 is the uppercase package name, without the HOST_ prefix
> -# for host packages
> -# argument 4 is the package directory prefix
> -# argument 5 is the type (target or host)
> -################################################################################
> -
> -define GENTARGETS_INNER
> -
> -# Define default values for various package-related variables, if not
> -# already defined. For some variables (version, source, site and
> -# subdir), if they are undefined, we try to see if a variable without
> -# the HOST_ prefix is defined. If so, we use such a variable, so that
> -# these informations have only to be specified once, for both the
> -# target and host packages of a given .mk file.
> -
> -$(2)_TYPE = $(5)
> -$(2)_NAME = $(1)
> -
> -# Keep the package version that may contain forward slashes in the _DL_VERSION
> -# variable, then replace all forward slashes ('/') by underscores ('_') to
> -# sanitize the package version that is used in paths, directory and file names.
> -# Forward slashes may appear in the package's version when pointing to a
> -# version control system branch or tag, for example remotes/origin/1_10_stable.
> -ifndef $(2)_VERSION
> - ifdef $(3)_VERSION
> - $(2)_DL_VERSION = $($(3)_VERSION)
> - $(2)_VERSION = $(subst /,_,$($(3)_VERSION))
> - else
> - $(2)_VERSION = undefined
> - $(2)_DL_VERSION = undefined
> - endif
> -else
> - $(2)_DL_VERSION = $($(2)_VERSION)
> - $(2)_VERSION = $(subst /,_,$($(2)_VERSION))
> -endif
> -
> -$(2)_BASE_NAME = $(1)-$$($(2)_VERSION)
> -$(2)_DL_DIR = $$(DL_DIR)/$$($(2)_BASE_NAME)
> -$(2)_DIR = $$(BUILD_DIR)/$$($(2)_BASE_NAME)
> -
> -ifneq ($$($(2)_OVERRIDE_SRCDIR),)
> -$(2)_VERSION = custom
> -endif
> -
> -ifndef $(2)_SOURCE
> - ifdef $(3)_SOURCE
> - $(2)_SOURCE = $($(3)_SOURCE)
> - else
> - $(2)_SOURCE ?= $$($(2)_BASE_NAME).tar.gz
> - endif
> -endif
> -
> -ifndef $(2)_PATCH
> - ifdef $(3)_PATCH
> - $(2)_PATCH = $($(3)_PATCH)
> - endif
> -endif
> -
> -ifndef $(2)_SITE
> - ifdef $(3)_SITE
> - $(2)_SITE = $($(3)_SITE)
> - else
> - $(2)_SITE ?= \
> - http://$$(BR2_SOURCEFORGE_MIRROR).dl.sourceforge.net/sourceforge/$(1)
> - endif
> -endif
> -
> -ifndef $(2)_SITE_METHOD
> - ifdef $(3)_SITE_METHOD
> - $(2)_SITE_METHOD = $($(3)_SITE_METHOD)
> - else
> - # Try automatic detection using the scheme part of the URI
> - $(2)_SITE_METHOD = $(firstword $(subst ://, ,$(call qstrip,$($(2)_SITE))))
> - endif
> -endif
> -
> -ifeq ($$($(2)_SITE_METHOD),local)
> -ifeq ($$($(2)_OVERRIDE_SRCDIR),)
> -$(2)_OVERRIDE_SRCDIR = $($(2)_SITE)
> -endif
> -endif
> -
> -$(2)_DEPENDENCIES ?= $(patsubst host-host-%,host-%,$(addprefix host-,$($(3)_DEPENDENCIES)))
> -
> -$(2)_INSTALL_STAGING ?= NO
> -$(2)_INSTALL_IMAGES ?= NO
> -$(2)_INSTALL_TARGET ?= YES
> -$(2)_DIR_PREFIX = $(if $(4),$(4),$(TOP_SRCDIR)/package)
> -
> -# define sub-target stamps
> -$(2)_TARGET_INSTALL_TARGET = $$($(2)_DIR)/.stamp_target_installed
> -$(2)_TARGET_INSTALL_STAGING = $$($(2)_DIR)/.stamp_staging_installed
> -$(2)_TARGET_INSTALL_IMAGES = $$($(2)_DIR)/.stamp_images_installed
> -$(2)_TARGET_INSTALL_HOST = $$($(2)_DIR)/.stamp_host_installed
> -$(2)_TARGET_BUILD = $$($(2)_DIR)/.stamp_built
> -$(2)_TARGET_CONFIGURE = $$($(2)_DIR)/.stamp_configured
> -$(2)_TARGET_RSYNC = $$($(2)_DIR)/.stamp_rsynced
> -$(2)_TARGET_RSYNC_SOURCE = $$($(2)_DIR)/.stamp_rsync_sourced
> -$(2)_TARGET_PATCH = $$($(2)_DIR)/.stamp_patched
> -$(2)_TARGET_EXTRACT = $$($(2)_DIR)/.stamp_extracted
> -$(2)_TARGET_SOURCE = $$($(2)_DIR)/.stamp_downloaded
> -$(2)_TARGET_UNINSTALL = $$($(2)_DIR)/.stamp_uninstalled
> -$(2)_TARGET_CLEAN = $$($(2)_DIR)/.stamp_cleaned
> -$(2)_TARGET_DIRCLEAN = $$($(2)_DIR)/.stamp_dircleaned
> -
> -# default extract command
> -$(2)_EXTRACT_CMDS ?= \
> - $$(if $$($(2)_SOURCE),$$(INFLATE$$(suffix $$($(2)_SOURCE))) $(DL_DIR)/$$($(2)_SOURCE) | \
> - $(TAR) $(TAR_STRIP_COMPONENTS)=1 -C $$($(2)_DIR) $(TAR_OPTIONS) -)
> -
> -# post-steps hooks
> -$(2)_POST_DOWNLOAD_HOOKS ?=
> -$(2)_POST_EXTRACT_HOOKS ?=
> -$(2)_PRE_PATCH_HOOKS ?=
> -$(2)_POST_PATCH_HOOKS ?=
> -$(2)_PRE_CONFIGURE_HOOKS ?=
> -$(2)_POST_CONFIGURE_HOOKS ?=
> -$(2)_POST_BUILD_HOOKS ?=
> -$(2)_POST_INSTALL_HOOKS ?=
> -$(2)_POST_INSTALL_STAGING_HOOKS ?=
> -$(2)_POST_INSTALL_TARGET_HOOKS ?=
> -$(2)_POST_INSTALL_IMAGES_HOOKS ?=
> -
> -# human-friendly targets and target sequencing
> -$(1): $(1)-install
> -
> -ifeq ($$($(2)_TYPE),host)
> -$(1)-install: $(1)-install-host
> -else
> -$(1)-install: $(1)-install-staging $(1)-install-target $(1)-install-images
> -endif
> -
> -ifeq ($$($(2)_INSTALL_TARGET),YES)
> -$(1)-install-target: $(1)-build \
> - $$($(2)_TARGET_INSTALL_TARGET)
> -else
> -$(1)-install-target:
> -endif
> -
> -ifeq ($$($(2)_INSTALL_STAGING),YES)
> -$(1)-install-staging: $(1)-build \
> - $$($(2)_TARGET_INSTALL_STAGING)
> -else
> -$(1)-install-staging:
> -endif
> -
> -ifeq ($$($(2)_INSTALL_IMAGES),YES)
> -$(1)-install-images: $(1)-build \
> - $$($(2)_TARGET_INSTALL_IMAGES)
> -else
> -$(1)-install-images:
> -endif
> -
> -$(1)-install-host: $(1)-build $$($(2)_TARGET_INSTALL_HOST)
> -
> -$(1)-build: $(1)-configure \
> - $$($(2)_TARGET_BUILD)
> -
> -ifeq ($$($(2)_OVERRIDE_SRCDIR),)
> -# In the normal case (no package override), the sequence of steps is
> -# source, by downloading
> -# depends
> -# extract
> -# patch
> -# configure
> -$(1)-configure: $(1)-patch $(1)-depends \
> - $$($(2)_TARGET_CONFIGURE)
> -
> -$(1)-patch: $(1)-extract $$($(2)_TARGET_PATCH)
> -
> -$(1)-extract: $(1)-source \
> - $$($(2)_TARGET_EXTRACT)
> -
> -$(1)-depends: $$($(2)_DEPENDENCIES)
> -
> -$(1)-source: $$($(2)_TARGET_SOURCE)
> -else
> -# In the package override case, the sequence of steps
> -# source, by rsyncing
> -# depends
> -# configure
> -$(1)-configure: $(1)-depends \
> - $$($(2)_TARGET_CONFIGURE)
> -
> -$(1)-depends: $(1)-rsync $$($(2)_DEPENDENCIES)
> -
> -$(1)-rsync: $$($(2)_TARGET_RSYNC)
> -
> -$(1)-source: $$($(2)_TARGET_RSYNC_SOURCE)
> -endif
> -
> -$(1)-show-depends:
> - @echo $$($(2)_DEPENDENCIES)
> -
> -$(1)-uninstall: $(1)-configure $$($(2)_TARGET_UNINSTALL)
> -
> -$(1)-clean: $(1)-uninstall \
> - $$($(2)_TARGET_CLEAN)
> -
> -$(1)-dirclean: $$($(2)_TARGET_DIRCLEAN)
> -
> -$(1)-clean-for-rebuild:
> -ifneq ($$($(2)_OVERRIDE_SRCDIR),)
> - rm -f $$($(2)_TARGET_RSYNC)
> -endif
> - rm -f $$($(2)_TARGET_BUILD)
> - rm -f $$($(2)_TARGET_INSTALL_STAGING)
> - rm -f $$($(2)_TARGET_INSTALL_TARGET)
> - rm -f $$($(2)_TARGET_INSTALL_IMAGES)
> - rm -f $$($(2)_TARGET_INSTALL_HOST)
> -
> -$(1)-rebuild: $(1)-clean-for-rebuild all
> -
> -$(1)-clean-for-reconfigure: $(1)-clean-for-rebuild
> - rm -f $$($(2)_TARGET_CONFIGURE)
> -
> -$(1)-reconfigure: $(1)-clean-for-reconfigure all
> -
> -# define the PKG variable for all targets, containing the
> -# uppercase package variable prefix
> -$$($(2)_TARGET_INSTALL_TARGET): PKG=$(2)
> -$$($(2)_TARGET_INSTALL_STAGING): PKG=$(2)
> -$$($(2)_TARGET_INSTALL_IMAGES): PKG=$(2)
> -$$($(2)_TARGET_INSTALL_HOST): PKG=$(2)
> -$$($(2)_TARGET_BUILD): PKG=$(2)
> -$$($(2)_TARGET_CONFIGURE): PKG=$(2)
> -$$($(2)_TARGET_RSYNC): SRCDIR=$$($(2)_OVERRIDE_SRCDIR)
> -$$($(2)_TARGET_RSYNC): PKG=$(2)
> -$$($(2)_TARGET_RSYNC_SOURCE): SRCDIR=$$($(2)_OVERRIDE_SRCDIR)
> -$$($(2)_TARGET_RSYNC_SOURCE): PKG=$(2)
> -$$($(2)_TARGET_PATCH): PKG=$(2)
> -$$($(2)_TARGET_PATCH): RAWNAME=$(patsubst host-%,%,$(1))
> -$$($(2)_TARGET_EXTRACT): PKG=$(2)
> -$$($(2)_TARGET_SOURCE): PKG=$(2)
> -$$($(2)_TARGET_UNINSTALL): PKG=$(2)
> -$$($(2)_TARGET_CLEAN): PKG=$(2)
> -$$($(2)_TARGET_DIRCLEAN): PKG=$(2)
> -
> -# Compute the name of the Kconfig option that correspond to the
> -# package being enabled. We handle three cases: the special Linux
> -# kernel case, the bootloaders case, and the normal packages case.
> -ifeq ($(1),linux)
> -$(2)_KCONFIG_VAR = BR2_LINUX_KERNEL
> -else ifeq ($(4),boot/)
> -$(2)_KCONFIG_VAR = BR2_TARGET_$(2)
> -else
> -$(2)_KCONFIG_VAR = BR2_PACKAGE_$(2)
> -endif
> -
> -# add package to the general list of targets if requested by the buildroot
> -# configuration
> -ifeq ($$($$($(2)_KCONFIG_VAR)),y)
> -
> -TARGETS += $(1)
> -PACKAGES_PERMISSIONS_TABLE += $$($(2)_PERMISSIONS)$$(sep)
> -PACKAGES_DEVICES_TABLE += $$($(2)_DEVICES)$$(sep)
> -
> -ifeq ($$($(2)_SITE_METHOD),svn)
> -DL_TOOLS_DEPENDENCIES += svn
> -else ifeq ($$($(2)_SITE_METHOD),git)
> -DL_TOOLS_DEPENDENCIES += git
> -else ifeq ($$($(2)_SITE_METHOD),bzr)
> -DL_TOOLS_DEPENDENCIES += bzr
> -else ifeq ($$($(2)_SITE_METHOD),scp)
> -DL_TOOLS_DEPENDENCIES += scp ssh
> -else ifeq ($$($(2)_SITE_METHOD),hg)
> -DL_TOOLS_DEPENDENCIES += hg
> -endif # SITE_METHOD
> -
> -DL_TOOLS_DEPENDENCIES += $(firstword $(INFLATE$(suffix $($(2)_SOURCE))))
> -
> -endif # $(2)_KCONFIG_VAR
> -endef # GENTARGETS_INNER
> -
> -################################################################################
> -# GENTARGETS -- the target generator macro for generic packages
> -#
> -# Argument 1 is "target" or "host" [optional, default: "target"]
> -################################################################################
> -
> -define GENTARGETS
> -ifeq ($(1),host)
> -# In the case of host packages, turn the package name "pkg" into "host-pkg"
> -$(call GENTARGETS_INNER,$(1)-$(call pkgname),$(call UPPERCASE,$(1)-$(call pkgname)),$(call UPPERCASE,$(call pkgname)),$(call pkgparentdir),host)
> -else
> -# In the case of target packages, keep the package name "pkg"
> -$(call GENTARGETS_INNER,$(call pkgname),$(call UPPERCASE,$(call pkgname)),$(call UPPERCASE,$(call pkgname)),$(call pkgparentdir),target)
> -endif
> -endef
> -
> -# :mode=makefile:
> diff --git a/package/pkg-download.mk b/package/pkg-download.mk
> new file mode 100644
> index 0000000..7e25674
> --- /dev/null
> +++ b/package/pkg-download.mk
> @@ -0,0 +1,212 @@
> +# Download method commands
> +WGET:=$(call qstrip,$(BR2_WGET)) $(QUIET)
> +SVN:=$(call qstrip,$(BR2_SVN))
> +BZR:=$(call qstrip,$(BR2_BZR))
> +GIT:=$(call qstrip,$(BR2_GIT))
> +HG:=$(call qstrip,$(BR2_HG)) $(QUIET)
> +SCP:=$(call qstrip,$(BR2_SCP)) $(QUIET)
> +SSH:=$(call qstrip,$(BR2_SSH)) $(QUIET)
> +LOCALFILES:=$(call qstrip,$(BR2_LOCALFILES))
> +
> +# Default spider mode is 'DOWNLOAD'. Other possible values are 'SOURCE_CHECK'
> +# used by the _source-check target and 'SHOW_EXTERNAL_DEPS', used by the
> +# external-deps target.
> +DL_MODE=DOWNLOAD
> +
> +DL_DIR=$(call qstrip,$(BR2_DL_DIR))
> +ifeq ($(DL_DIR),)
> +DL_DIR:=$(TOPDIR)/dl
> +endif
> +
> +#
> +# URI scheme helper functions
> +# Example URIs:
> +# * http://www.example.com/dir/file
> +# * scp://www.example.com:dir/file (with domainseparator :)
> +#
> +# geturischeme: http
> +geturischeme=$(firstword $(subst ://, ,$(call qstrip,$(1))))
> +# stripurischeme: www.example.com/dir/file
> +stripurischeme=$(lastword $(subst ://, ,$(call qstrip,$(1))))
> +# domain: www.example.com
> +domain=$(firstword $(subst $(call domainseparator,$(2)), ,$(call stripurischeme,$(1))))
> +# notdomain: dir/file
> +notdomain=$(patsubst $(call domain,$(1),$(2))$(call domainseparator,$(2))%,%,$(call stripurischeme,$(1)))
> +#
> +# default domainseparator is /, specify alternative value as first argument
> +domainseparator=$(if $(1),$(1),/)
> +
> +################################################################################
> +# The DOWNLOAD_{GIT,SVN,BZR,HG,LOCALFILES} helpers are in charge of getting a
> +# working copy of the source repository for their corresponding SCM,
> +# checking out the requested version / commit / tag, and create an
> +# archive out of it. DOWNLOAD_SCP uses scp to obtain a remote file with
> +# ssh authentication. DOWNLOAD_WGET is the normal wget-based download
> +# mechanism.
> +#
> +# The SOURCE_CHECK_{GIT,SVN,BZR,HG,WGET,LOCALFILES,SCP} helpers are in charge of
> +# simply checking that the source is available for download. This can be used
> +# to make sure one will be able to get all the sources needed for
> +# one's build configuration.
> +#
> +# The SHOW_EXTERNAL_DEPS_{GIT,SVN,BZR,HG,WGET,LOCALFILES,SCP} helpers simply
> +# output to the console the names of the files that will be downloaded, or path
> +# and revision of the source repositories, producing a list of all the
> +# "external dependencies" of a given build configuration.
> +################################################################################
> +
> +define DOWNLOAD_GIT
> + test -e $(DL_DIR)/$($(PKG)_SOURCE) || \
> + (pushd $(DL_DIR) > /dev/null && \
> + $(GIT) clone --bare $($(PKG)_SITE) $($(PKG)_BASE_NAME) && \
> + pushd $($(PKG)_BASE_NAME) > /dev/null && \
> + $(GIT) archive --format=tar --prefix=$($(PKG)_BASE_NAME)/ $($(PKG)_DL_VERSION) | \
> + gzip -c > $(DL_DIR)/$($(PKG)_SOURCE) && \
> + popd > /dev/null && \
> + rm -rf $($(PKG)_DL_DIR) && \
> + popd > /dev/null)
> +endef
> +
> +# TODO: improve to check that the given PKG_DL_VERSION exists on the remote
> +# repository
> +define SOURCE_CHECK_GIT
> + $(GIT) ls-remote --heads $($(PKG)_SITE) > /dev/null
> +endef
> +
> +define SHOW_EXTERNAL_DEPS_GIT
> + echo $($(PKG)_SOURCE)
> +endef
> +
> +
> +define DOWNLOAD_BZR
> + test -e $(DL_DIR)/$($(PKG)_SOURCE) || \
> + $(BZR) export $(DL_DIR)/$($(PKG)_SOURCE) $($(PKG)_SITE) -r $($(PKG)_DL_VERSION)
> +endef
> +
> +define SOURCE_CHECK_BZR
> + $(BZR) ls --quiet $($(PKG)_SITE) > /dev/null
> +endef
> +
> +define SHOW_EXTERNAL_DEPS_BZR
> + echo $($(PKG)_SOURCE)
> +endef
> +
> +
> +define DOWNLOAD_SVN
> + test -e $(DL_DIR)/$($(PKG)_SOURCE) || \
> + (pushd $(DL_DIR) > /dev/null && \
> + $(SVN) export -r $($(PKG)_DL_VERSION) $($(PKG)_SITE) $($(PKG)_DL_DIR) && \
> + $(TAR) czf $($(PKG)_SOURCE) $($(PKG)_BASE_NAME)/ && \
> + rm -rf $($(PKG)_DL_DIR) && \
> + popd > /dev/null)
> +endef
> +
> +define SOURCE_CHECK_SVN
> + $(SVN) ls $($(PKG)_SITE) > /dev/null
> +endef
> +
> +define SHOW_EXTERNAL_DEPS_SVN
> + echo $($(PKG)_SOURCE)
> +endef
> +
> +# SCP URIs should be of the form scp://[user@]host:filepath
> +# Note that filepath is relative to the user's home directory, so you may want
> +# to prepend the path with a slash: scp://[user@]host:/absolutepath
> +define DOWNLOAD_SCP
> + test -e $(DL_DIR)/$(2) || \
> + $(SCP) $(call stripurischeme,$(call qstrip,$(1)))/$(2) $(DL_DIR)
> +endef
> +
> +define SOURCE_CHECK_SCP
> + $(SSH) $(call domain,$(1),:) ls $(call notdomain,$(1)/$(2),:) > /dev/null
> +endef
> +
> +define SHOW_EXTERNAL_DEPS_SCP
> + echo $(2)
> +endef
> +
> +
> +define DOWNLOAD_HG
> + test -e $(DL_DIR)/$($(PKG)_SOURCE) || \
> + (pushd $(DL_DIR) > /dev/null && \
> + $(HG) clone --noupdate --rev $($(PKG)_DL_VERSION) $($(PKG)_SITE) $($(PKG)_BASE_NAME) && \
> + $(HG) archive --repository $($(PKG)_BASE_NAME) --type tgz --prefix $($(PKG)_BASE_NAME)/ \
> + --rev $($(PKG)_DL_VERSION) $(DL_DIR)/$($(PKG)_SOURCE) && \
> + rm -rf $($(PKG)_DL_DIR) && \
> + popd > /dev/null)
> +endef
> +
> +# TODO: improve to check that the given PKG_DL_VERSION exists on the remote
> +# repository
> +define SOURCE_CHECK_HG
> + $(HG) incoming --force -l1 $($(PKG)_SITE) > /dev/null
> +endef
> +
> +define SHOW_EXTERNAL_DEPS_HG
> + echo $($(PKG)_SOURCE)
> +endef
> +
> +
> +define DOWNLOAD_WGET
> + test -e $(DL_DIR)/$(2) || \
> + $(WGET) -O $(DL_DIR)/$(2) $(call qstrip,$(1))/$(2) || \
> + (rm -f $(DL_DIR)/$(2) ; exit 1)
> +endef
> +
> +define SOURCE_CHECK_WGET
> + $(WGET) --spider $(call qstrip,$(1))/$(2)
> +endef
> +
> +define SHOW_EXTERNAL_DEPS_WGET
> + echo $(2)
> +endef
> +
> +define DOWNLOAD_LOCALFILES
> + test -e $(DL_DIR)/$($(PKG)_SOURCE) || \
> + $(LOCALFILES) $(call qstrip,$(subst file://,,$($(PKG)_SITE)))/$($(PKG)_SOURCE) $(DL_DIR)
> +endef
> +
> +define SOURCE_CHECK_LOCALFILES
> + test -e $(call qstrip,$(subst file://,,$($(PKG)_SITE)))/$($(PKG)_SOURCE)
> +endef
> +
> +define SHOW_EXTERNAL_DEPS_LOCALFILES
> + echo $($(PKG)_SITE)/$($(PKG)_SOURCE)
> +endef
> +
> +################################################################################
> +# DOWNLOAD -- Download helper. Will try to download source from:
> +# 1) BR2_PRIMARY_SITE if enabled
> +# 2) Download site
> +# 3) BR2_BACKUP_SITE if enabled
> +#
> +# Argument 1 is the source location
> +# Argument 2 is the source filename
> +#
> +# E.G. use like this:
> +# $(call DOWNLOAD,$(FOO_SITE),$(FOO_SOURCE))
> +################################################################################
> +
> +define DOWNLOAD
> + $(Q)if test -n "$(call qstrip,$(BR2_PRIMARY_SITE))" ; then \
> + case "$(call geturischeme,$(BR2_PRIMARY_SITE))" in \
> + scp) $(call $(DL_MODE)_SCP,$(BR2_PRIMARY_SITE),$(2)) && exit ;; \
> + *) $(call $(DL_MODE)_WGET,$(BR2_PRIMARY_SITE),$(2)) && exit ;; \
> + esac ; \
> + fi ; \
> + if test -n "$(1)" ; then \
> + case "$($(PKG)_SITE_METHOD)" in \
> + git) $($(DL_MODE)_GIT) && exit ;; \
> + svn) $($(DL_MODE)_SVN) && exit ;; \
> + bzr) $($(DL_MODE)_BZR) && exit ;; \
> + file) $($(DL_MODE)_LOCALFILES) && exit ;; \
> + scp) $($(DL_MODE)_SCP) && exit ;; \
> + hg) $($(DL_MODE)_HG) && exit ;; \
> + *) $(call $(DL_MODE)_WGET,$(1),$(2)) && exit ;; \
> + esac ; \
> + fi ; \
> + if test -n "$(call qstrip,$(BR2_BACKUP_SITE))" ; then \
> + $(call $(DL_MODE)_WGET,$(BR2_BACKUP_SITE),$(2)) && exit ; \
> + fi ; \
> + exit 1
> +endef
> diff --git a/package/pkg-gentargets.mk b/package/pkg-gentargets.mk
> new file mode 100644
> index 0000000..b8c437e
> --- /dev/null
> +++ b/package/pkg-gentargets.mk
> @@ -0,0 +1,458 @@
> +################################################################################
> +# Generic package infrastructure
> +#
> +# This file implements an infrastructure that eases development of
> +# package .mk files. It should be used for all non-autotools based
> +# packages. Autotools-based packages should use the specialized
> +# autotools infrastructure in package/Makefile.autotools.in.
> +#
> +# See the Buildroot documentation for details on the usage of this
> +# infrastructure
> +#
> +# In terms of implementation, this generic infrastructure requires the
> +# .mk file to specify:
> +#
> +# 1. Metadata informations about the package: name, version,
> +# download URL, etc.
> +#
> +# 2. Description of the commands to be executed to configure, build
> +# and install the package
> +#
> +# The autotools infrastructure specializes this generic infrastructure
> +# by already implementing the configure, build and install steps.
> +################################################################################
> +
> +################################################################################
> +# Implicit targets -- produce a stamp file for each step of a package build
> +################################################################################
> +
> +# Retrieve the archive
> +$(BUILD_DIR)/%/.stamp_downloaded:
> +ifeq ($(DL_MODE),DOWNLOAD)
> +# Only show the download message if it isn't already downloaded
> + $(Q)(test -e $(DL_DIR)/$($(PKG)_SOURCE) && \
> + (test -z $($(PKG)_PATCH) || test -e $(DL_DIR)$($(PKG)_PATCH))) || \
> + $(call MESSAGE,"Downloading")
> +endif
> + $(if $($(PKG)_SOURCE),$(call DOWNLOAD,$($(PKG)_SITE),$($(PKG)_SOURCE)))
> + $(if $($(PKG)_PATCH),$(call DOWNLOAD,$($(PKG)_SITE),$($(PKG)_PATCH)))
> + $(foreach hook,$($(PKG)_POST_DOWNLOAD_HOOKS),$(call $(hook))$(sep))
> +ifeq ($(DL_MODE),DOWNLOAD)
> + $(Q)mkdir -p $(@D)
> + $(Q)touch $@
> +endif
> +
> +# Unpack the archive
> +$(BUILD_DIR)/%/.stamp_extracted:
> + @$(call MESSAGE,"Extracting")
> + $(Q)mkdir -p $(@D)
> + $($(PKG)_EXTRACT_CMDS)
> +# some packages have messed up permissions inside
> + $(Q)chmod -R +rw $(@D)
> + $(foreach hook,$($(PKG)_POST_EXTRACT_HOOKS),$(call $(hook))$(sep))
> + $(Q)touch $@
> +
> +# Rsync the source directory if the <pkg>_OVERRIDE_SRCDIR feature is
> +# used.
> +$(BUILD_DIR)/%/.stamp_rsynced:
> + @$(call MESSAGE,"Syncing from source dir $(SRCDIR)")
> + @test -d $(SRCDIR) || (echo "ERROR: $(SRCDIR) does not exist" ; exit 1)
> + rsync -au $(SRCDIR)/ $(@D)
> + $(Q)touch $@
> +
> +# Handle the SOURCE_CHECK and SHOW_EXTERNAL_DEPS cases for rsynced
> +# packages
> +$(BUILD_DIR)/%/.stamp_rsync_sourced:
> +ifeq ($(DL_MODE),SOURCE_CHECK)
> + test -d $(SRCDIR)
> +else ifeq ($(DL_MODE),SHOW_EXTERNAL_DEPS)
> + echo "file://$(SRCDIR)"
> +else
> + @true # Nothing to do to source a local package
> +endif
> +
> +# Patch
> +#
> +# The RAWNAME variable is the lowercased package name, which allows to
> +# find the package directory (typically package/<pkgname>) and the
> +# prefix of the patches
> +$(BUILD_DIR)/%/.stamp_patched: NAMEVER = $(RAWNAME)-$($(PKG)_VERSION)
> +$(BUILD_DIR)/%/.stamp_patched:
> + @$(call MESSAGE,"Patching $($(PKG)_DIR_PREFIX)/$(RAWNAME)")
> + $(foreach hook,$($(PKG)_PRE_PATCH_HOOKS),$(call $(hook))$(sep))
> + $(if $($(PKG)_PATCH),support/scripts/apply-patches.sh $(@D) $(DL_DIR) $($(PKG)_PATCH))
> + $(Q)( \
> + if test -d $($(PKG)_DIR_PREFIX)/$(RAWNAME); then \
> + if test "$(wildcard $($(PKG)_DIR_PREFIX)/$(RAWNAME)/$(NAMEVER)*.patch*)"; then \
> + support/scripts/apply-patches.sh $(@D) $($(PKG)_DIR_PREFIX)/$(RAWNAME) $(NAMEVER)\*.patch $(NAMEVER)\*.patch.$(ARCH) || exit 1; \
> + else \
> + support/scripts/apply-patches.sh $(@D) $($(PKG)_DIR_PREFIX)/$(RAWNAME) $(RAWNAME)\*.patch $(RAWNAME)\*.patch.$(ARCH) || exit 1; \
> + if test -d $($(PKG)_DIR_PREFIX)/$(RAWNAME)/$(NAMEVER); then \
> + support/scripts/apply-patches.sh $(@D) $($(PKG)_DIR_PREFIX)/$(RAWNAME)/$(NAMEVER) \*.patch \*.patch.$(ARCH) || exit 1; \
> + fi; \
> + fi; \
> + fi; \
> + )
> + $(foreach hook,$($(PKG)_POST_PATCH_HOOKS),$(call $(hook))$(sep))
> + $(Q)touch $@
> +
> +# Configure
> +$(BUILD_DIR)/%/.stamp_configured:
> + $(foreach hook,$($(PKG)_PRE_CONFIGURE_HOOKS),$(call $(hook))$(sep))
> + @$(call MESSAGE,"Configuring")
> + $($(PKG)_CONFIGURE_CMDS)
> + $(foreach hook,$($(PKG)_POST_CONFIGURE_HOOKS),$(call $(hook))$(sep))
> + $(Q)touch $@
> +
> +# Build
> +$(BUILD_DIR)/%/.stamp_built::
> + @$(call MESSAGE,"Building")
> + $($(PKG)_BUILD_CMDS)
> + $(foreach hook,$($(PKG)_POST_BUILD_HOOKS),$(call $(hook))$(sep))
> + $(Q)touch $@
> +
> +# Install to host dir
> +$(BUILD_DIR)/%/.stamp_host_installed:
> + @$(call MESSAGE,"Installing to host directory")
> + $($(PKG)_INSTALL_CMDS)
> + $(foreach hook,$($(PKG)_POST_INSTALL_HOOKS),$(call $(hook))$(sep))
> + $(Q)touch $@
> +
> +# Install to staging dir
> +$(BUILD_DIR)/%/.stamp_staging_installed:
> + @$(call MESSAGE,"Installing to staging directory")
> + $($(PKG)_INSTALL_STAGING_CMDS)
> + $(foreach hook,$($(PKG)_POST_INSTALL_STAGING_HOOKS),$(call $(hook))$(sep))
> + $(Q)touch $@
> +
> +# Install to images dir
> +$(BUILD_DIR)/%/.stamp_images_installed:
> + @$(call MESSAGE,"Installing to images directory")
> + $($(PKG)_INSTALL_IMAGES_CMDS)
> + $(foreach hook,$($(PKG)_POST_INSTALL_IMAGES_HOOKS),$(call $(hook))$(sep))
> + $(Q)touch $@
> +
> +# Install to target dir
> +$(BUILD_DIR)/%/.stamp_target_installed:
> + @$(call MESSAGE,"Installing to target")
> + $($(PKG)_INSTALL_TARGET_CMDS)
> + $(foreach hook,$($(PKG)_POST_INSTALL_TARGET_HOOKS),$(call $(hook))$(sep))
> + $(Q)touch $@
> +
> +# Clean package
> +$(BUILD_DIR)/%/.stamp_cleaned:
> + @$(call MESSAGE,"Cleaning up")
> + $($(PKG)_CLEAN_CMDS)
> + rm -f $(@D)/.stamp_built
> +
> +# Uninstall package from target and staging
> +# Uninstall commands tend to fail, so remove the stamp files first
> +$(BUILD_DIR)/%/.stamp_uninstalled:
> + @$(call MESSAGE,"Uninstalling")
> + rm -f $($(PKG)_TARGET_INSTALL_STAGING)
> + rm -f $($(PKG)_TARGET_INSTALL_TARGET)
> + $($(PKG)_UNINSTALL_STAGING_CMDS)
> + $($(PKG)_UNINSTALL_TARGET_CMDS)
> +
> +# Remove package sources
> +$(BUILD_DIR)/%/.stamp_dircleaned:
> + rm -Rf $(@D)
> +
> +################################################################################
> +# GENTARGETS_INNER -- generates the make targets needed to build a
> +# generic package
> +#
> +# argument 1 is the lowercase package name
> +# argument 2 is the uppercase package name, including an HOST_ prefix
> +# for host packages
> +# argument 3 is the uppercase package name, without the HOST_ prefix
> +# for host packages
> +# argument 4 is the package directory prefix
> +# argument 5 is the type (target or host)
> +################################################################################
> +
> +define GENTARGETS_INNER
> +
> +# Define default values for various package-related variables, if not
> +# already defined. For some variables (version, source, site and
> +# subdir), if they are undefined, we try to see if a variable without
> +# the HOST_ prefix is defined. If so, we use such a variable, so that
> +# these informations have only to be specified once, for both the
> +# target and host packages of a given .mk file.
> +
> +$(2)_TYPE = $(5)
> +$(2)_NAME = $(1)
> +
> +# Keep the package version that may contain forward slashes in the _DL_VERSION
> +# variable, then replace all forward slashes ('/') by underscores ('_') to
> +# sanitize the package version that is used in paths, directory and file names.
> +# Forward slashes may appear in the package's version when pointing to a
> +# version control system branch or tag, for example remotes/origin/1_10_stable.
> +ifndef $(2)_VERSION
> + ifdef $(3)_VERSION
> + $(2)_DL_VERSION = $($(3)_VERSION)
> + $(2)_VERSION = $(subst /,_,$($(3)_VERSION))
> + else
> + $(2)_VERSION = undefined
> + $(2)_DL_VERSION = undefined
> + endif
> +else
> + $(2)_DL_VERSION = $($(2)_VERSION)
> + $(2)_VERSION = $(subst /,_,$($(2)_VERSION))
> +endif
> +
> +$(2)_BASE_NAME = $(1)-$$($(2)_VERSION)
> +$(2)_DL_DIR = $$(DL_DIR)/$$($(2)_BASE_NAME)
> +$(2)_DIR = $$(BUILD_DIR)/$$($(2)_BASE_NAME)
> +
> +ifneq ($$($(2)_OVERRIDE_SRCDIR),)
> +$(2)_VERSION = custom
> +endif
> +
> +ifndef $(2)_SOURCE
> + ifdef $(3)_SOURCE
> + $(2)_SOURCE = $($(3)_SOURCE)
> + else
> + $(2)_SOURCE ?= $$($(2)_BASE_NAME).tar.gz
> + endif
> +endif
> +
> +ifndef $(2)_PATCH
> + ifdef $(3)_PATCH
> + $(2)_PATCH = $($(3)_PATCH)
> + endif
> +endif
> +
> +ifndef $(2)_SITE
> + ifdef $(3)_SITE
> + $(2)_SITE = $($(3)_SITE)
> + else
> + $(2)_SITE ?= \
> + http://$$(BR2_SOURCEFORGE_MIRROR).dl.sourceforge.net/sourceforge/$(1)
> + endif
> +endif
> +
> +ifndef $(2)_SITE_METHOD
> + ifdef $(3)_SITE_METHOD
> + $(2)_SITE_METHOD = $($(3)_SITE_METHOD)
> + else
> + # Try automatic detection using the scheme part of the URI
> + $(2)_SITE_METHOD = $(firstword $(subst ://, ,$(call qstrip,$($(2)_SITE))))
> + endif
> +endif
> +
> +ifeq ($$($(2)_SITE_METHOD),local)
> +ifeq ($$($(2)_OVERRIDE_SRCDIR),)
> +$(2)_OVERRIDE_SRCDIR = $($(2)_SITE)
> +endif
> +endif
> +
> +$(2)_DEPENDENCIES ?= $(patsubst host-host-%,host-%,$(addprefix host-,$($(3)_DEPENDENCIES)))
> +
> +$(2)_INSTALL_STAGING ?= NO
> +$(2)_INSTALL_IMAGES ?= NO
> +$(2)_INSTALL_TARGET ?= YES
> +$(2)_DIR_PREFIX = $(if $(4),$(4),$(TOP_SRCDIR)/package)
> +
> +# define sub-target stamps
> +$(2)_TARGET_INSTALL_TARGET = $$($(2)_DIR)/.stamp_target_installed
> +$(2)_TARGET_INSTALL_STAGING = $$($(2)_DIR)/.stamp_staging_installed
> +$(2)_TARGET_INSTALL_IMAGES = $$($(2)_DIR)/.stamp_images_installed
> +$(2)_TARGET_INSTALL_HOST = $$($(2)_DIR)/.stamp_host_installed
> +$(2)_TARGET_BUILD = $$($(2)_DIR)/.stamp_built
> +$(2)_TARGET_CONFIGURE = $$($(2)_DIR)/.stamp_configured
> +$(2)_TARGET_RSYNC = $$($(2)_DIR)/.stamp_rsynced
> +$(2)_TARGET_RSYNC_SOURCE = $$($(2)_DIR)/.stamp_rsync_sourced
> +$(2)_TARGET_PATCH = $$($(2)_DIR)/.stamp_patched
> +$(2)_TARGET_EXTRACT = $$($(2)_DIR)/.stamp_extracted
> +$(2)_TARGET_SOURCE = $$($(2)_DIR)/.stamp_downloaded
> +$(2)_TARGET_UNINSTALL = $$($(2)_DIR)/.stamp_uninstalled
> +$(2)_TARGET_CLEAN = $$($(2)_DIR)/.stamp_cleaned
> +$(2)_TARGET_DIRCLEAN = $$($(2)_DIR)/.stamp_dircleaned
> +
> +# default extract command
> +$(2)_EXTRACT_CMDS ?= \
> + $$(if $$($(2)_SOURCE),$$(INFLATE$$(suffix $$($(2)_SOURCE))) $(DL_DIR)/$$($(2)_SOURCE) | \
> + $(TAR) $(TAR_STRIP_COMPONENTS)=1 -C $$($(2)_DIR) $(TAR_OPTIONS) -)
> +
> +# post-steps hooks
> +$(2)_POST_DOWNLOAD_HOOKS ?=
> +$(2)_POST_EXTRACT_HOOKS ?=
> +$(2)_PRE_PATCH_HOOKS ?=
> +$(2)_POST_PATCH_HOOKS ?=
> +$(2)_PRE_CONFIGURE_HOOKS ?=
> +$(2)_POST_CONFIGURE_HOOKS ?=
> +$(2)_POST_BUILD_HOOKS ?=
> +$(2)_POST_INSTALL_HOOKS ?=
> +$(2)_POST_INSTALL_STAGING_HOOKS ?=
> +$(2)_POST_INSTALL_TARGET_HOOKS ?=
> +$(2)_POST_INSTALL_IMAGES_HOOKS ?=
> +
> +# human-friendly targets and target sequencing
> +$(1): $(1)-install
> +
> +ifeq ($$($(2)_TYPE),host)
> +$(1)-install: $(1)-install-host
> +else
> +$(1)-install: $(1)-install-staging $(1)-install-target $(1)-install-images
> +endif
> +
> +ifeq ($$($(2)_INSTALL_TARGET),YES)
> +$(1)-install-target: $(1)-build \
> + $$($(2)_TARGET_INSTALL_TARGET)
> +else
> +$(1)-install-target:
> +endif
> +
> +ifeq ($$($(2)_INSTALL_STAGING),YES)
> +$(1)-install-staging: $(1)-build \
> + $$($(2)_TARGET_INSTALL_STAGING)
> +else
> +$(1)-install-staging:
> +endif
> +
> +ifeq ($$($(2)_INSTALL_IMAGES),YES)
> +$(1)-install-images: $(1)-build \
> + $$($(2)_TARGET_INSTALL_IMAGES)
> +else
> +$(1)-install-images:
> +endif
> +
> +$(1)-install-host: $(1)-build $$($(2)_TARGET_INSTALL_HOST)
> +
> +$(1)-build: $(1)-configure \
> + $$($(2)_TARGET_BUILD)
> +
> +ifeq ($$($(2)_OVERRIDE_SRCDIR),)
> +# In the normal case (no package override), the sequence of steps is
> +# source, by downloading
> +# depends
> +# extract
> +# patch
> +# configure
> +$(1)-configure: $(1)-patch $(1)-depends \
> + $$($(2)_TARGET_CONFIGURE)
> +
> +$(1)-patch: $(1)-extract $$($(2)_TARGET_PATCH)
> +
> +$(1)-extract: $(1)-source \
> + $$($(2)_TARGET_EXTRACT)
> +
> +$(1)-depends: $$($(2)_DEPENDENCIES)
> +
> +$(1)-source: $$($(2)_TARGET_SOURCE)
> +else
> +# In the package override case, the sequence of steps
> +# source, by rsyncing
> +# depends
> +# configure
> +$(1)-configure: $(1)-depends \
> + $$($(2)_TARGET_CONFIGURE)
> +
> +$(1)-depends: $(1)-rsync $$($(2)_DEPENDENCIES)
> +
> +$(1)-rsync: $$($(2)_TARGET_RSYNC)
> +
> +$(1)-source: $$($(2)_TARGET_RSYNC_SOURCE)
> +endif
> +
> +$(1)-show-depends:
> + @echo $$($(2)_DEPENDENCIES)
> +
> +$(1)-uninstall: $(1)-configure $$($(2)_TARGET_UNINSTALL)
> +
> +$(1)-clean: $(1)-uninstall \
> + $$($(2)_TARGET_CLEAN)
> +
> +$(1)-dirclean: $$($(2)_TARGET_DIRCLEAN)
> +
> +$(1)-clean-for-rebuild:
> +ifneq ($$($(2)_OVERRIDE_SRCDIR),)
> + rm -f $$($(2)_TARGET_RSYNC)
> +endif
> + rm -f $$($(2)_TARGET_BUILD)
> + rm -f $$($(2)_TARGET_INSTALL_STAGING)
> + rm -f $$($(2)_TARGET_INSTALL_TARGET)
> + rm -f $$($(2)_TARGET_INSTALL_IMAGES)
> + rm -f $$($(2)_TARGET_INSTALL_HOST)
> +
> +$(1)-rebuild: $(1)-clean-for-rebuild all
> +
> +$(1)-clean-for-reconfigure: $(1)-clean-for-rebuild
> + rm -f $$($(2)_TARGET_CONFIGURE)
> +
> +$(1)-reconfigure: $(1)-clean-for-reconfigure all
> +
> +# define the PKG variable for all targets, containing the
> +# uppercase package variable prefix
> +$$($(2)_TARGET_INSTALL_TARGET): PKG=$(2)
> +$$($(2)_TARGET_INSTALL_STAGING): PKG=$(2)
> +$$($(2)_TARGET_INSTALL_IMAGES): PKG=$(2)
> +$$($(2)_TARGET_INSTALL_HOST): PKG=$(2)
> +$$($(2)_TARGET_BUILD): PKG=$(2)
> +$$($(2)_TARGET_CONFIGURE): PKG=$(2)
> +$$($(2)_TARGET_RSYNC): SRCDIR=$$($(2)_OVERRIDE_SRCDIR)
> +$$($(2)_TARGET_RSYNC): PKG=$(2)
> +$$($(2)_TARGET_RSYNC_SOURCE): SRCDIR=$$($(2)_OVERRIDE_SRCDIR)
> +$$($(2)_TARGET_RSYNC_SOURCE): PKG=$(2)
> +$$($(2)_TARGET_PATCH): PKG=$(2)
> +$$($(2)_TARGET_PATCH): RAWNAME=$(patsubst host-%,%,$(1))
> +$$($(2)_TARGET_EXTRACT): PKG=$(2)
> +$$($(2)_TARGET_SOURCE): PKG=$(2)
> +$$($(2)_TARGET_UNINSTALL): PKG=$(2)
> +$$($(2)_TARGET_CLEAN): PKG=$(2)
> +$$($(2)_TARGET_DIRCLEAN): PKG=$(2)
> +
> +# Compute the name of the Kconfig option that correspond to the
> +# package being enabled. We handle three cases: the special Linux
> +# kernel case, the bootloaders case, and the normal packages case.
> +ifeq ($(1),linux)
> +$(2)_KCONFIG_VAR = BR2_LINUX_KERNEL
> +else ifeq ($(4),boot/)
> +$(2)_KCONFIG_VAR = BR2_TARGET_$(2)
> +else
> +$(2)_KCONFIG_VAR = BR2_PACKAGE_$(2)
> +endif
> +
> +# add package to the general list of targets if requested by the buildroot
> +# configuration
> +ifeq ($$($$($(2)_KCONFIG_VAR)),y)
> +
> +TARGETS += $(1)
> +PACKAGES_PERMISSIONS_TABLE += $$($(2)_PERMISSIONS)$$(sep)
> +PACKAGES_DEVICES_TABLE += $$($(2)_DEVICES)$$(sep)
> +
> +ifeq ($$($(2)_SITE_METHOD),svn)
> +DL_TOOLS_DEPENDENCIES += svn
> +else ifeq ($$($(2)_SITE_METHOD),git)
> +DL_TOOLS_DEPENDENCIES += git
> +else ifeq ($$($(2)_SITE_METHOD),bzr)
> +DL_TOOLS_DEPENDENCIES += bzr
> +else ifeq ($$($(2)_SITE_METHOD),scp)
> +DL_TOOLS_DEPENDENCIES += scp ssh
> +else ifeq ($$($(2)_SITE_METHOD),hg)
> +DL_TOOLS_DEPENDENCIES += hg
> +endif # SITE_METHOD
> +
> +DL_TOOLS_DEPENDENCIES += $(firstword $(INFLATE$(suffix $($(2)_SOURCE))))
> +
> +endif # $(2)_KCONFIG_VAR
> +endef # GENTARGETS_INNER
> +
> +################################################################################
> +# GENTARGETS -- the target generator macro for generic packages
> +#
> +# Argument 1 is "target" or "host" [optional, default: "target"]
> +################################################################################
> +
> +define GENTARGETS
> +ifeq ($(1),host)
> +# In the case of host packages, turn the package name "pkg" into "host-pkg"
> +$(call GENTARGETS_INNER,$(1)-$(call pkgname),$(call UPPERCASE,$(1)-$(call pkgname)),$(call UPPERCASE,$(call pkgname)),$(call pkgparentdir),host)
> +else
> +# In the case of target packages, keep the package name "pkg"
> +$(call GENTARGETS_INNER,$(call pkgname),$(call UPPERCASE,$(call pkgname)),$(call UPPERCASE,$(call pkgname)),$(call pkgparentdir),target)
> +endif
> +endef
> +
> +# :mode=makefile:
> diff --git a/package/pkg-utils.mk b/package/pkg-utils.mk
> new file mode 100644
> index 0000000..729f8bb
> --- /dev/null
> +++ b/package/pkg-utils.mk
> @@ -0,0 +1,72 @@
> +# UPPERCASE Macro -- transform its argument to uppercase and replace dots and
> +# hyphens to underscores
> +
> +# Heavily inspired by the up macro from gmsl (http://gmsl.sf.net)
> +# This is approx 5 times faster than forking a shell and tr, and
> +# as this macro is used a lot it matters
> +# This works by creating translation character pairs (E.G. a:A b:B)
> +# and then looping though all of them running $(subst from,to,text)
> +[FROM] := a b c d e f g h i j k l m n o p q r s t u v w x y z . -
> +[TO] := A B C D E F G H I J K L M N O P Q R S T U V W X Y Z _ _
> +
> +UPPERCASE = $(strip $(eval __tmp := $1) \
> + $(foreach c, $(join $(addsuffix :,$([FROM])),$([TO])), \
> + $(eval __tmp := \
> + $(subst $(word 1,$(subst :, ,$c)),$(word 2,$(subst :, ,$c)),\
> + $(__tmp)))) \
> + $(__tmp))
> +
> +define KCONFIG_ENABLE_OPT
> + $(SED) "/\\<$(1)\\>/d" $(2)
> + echo "$(1)=y" >> $(2)
> +endef
> +
> +define KCONFIG_SET_OPT
> + $(SED) "/\\<$(1)\\>/d" $(3)
> + echo "$(1)=$(2)" >> $(3)
> +endef
> +
> +define KCONFIG_DISABLE_OPT
> + $(SED) "/\\<$(1)\\>/d" $(2)
> + echo "# $(1) is not set" >> $(2)
> +endef
> +
> +# Helper functions to determine the name of a package and its
> +# directory from its makefile directory, using the $(MAKEFILE_LIST)
> +# variable provided by make. This is used by the *TARGETS macros to
> +# automagically find where the package is located. Note that the
> +# pkgdir macro is carefully written to handle the case of the Linux
> +# package, for which the package directory is an empty string.
> +define pkgdir
> +$(dir $(lastword $(MAKEFILE_LIST)))
> +endef
> +
> +define pkgname
> +$(lastword $(subst /, ,$(call pkgdir)))
> +endef
> +
> +define pkgparentdir
> +$(patsubst %$(call pkgname)/,%,$(call pkgdir))
> +endef
> +
> +# Define extractors for different archive suffixes
> +INFLATE.bz2 = $(BZCAT)
> +INFLATE.gz = $(ZCAT)
> +INFLATE.tbz = $(BZCAT)
> +INFLATE.tbz2 = $(BZCAT)
> +INFLATE.tgz = $(ZCAT)
> +INFLATE.xz = $(XZCAT)
> +INFLATE.tar = cat
> +
> +# MESSAGE Macro -- display a message in bold type
> +MESSAGE = echo "$(TERM_BOLD)>>> $($(PKG)_NAME) $($(PKG)_VERSION) $(1)$(TERM_RESET)"
> +TERM_BOLD := $(shell tput smso)
> +TERM_RESET := $(shell tput rmso)
> +
> +
> +# Needed for the foreach loops to loop over the list of hooks, so that
> +# each hook call is properly separated by a newline.
> +define sep
> +
> +
> +endef
> --
> 1.7.4.1
>
> _______________________________________________
> buildroot mailing list
> buildroot at busybox.net
> http://lists.busybox.net/mailman/listinfo/buildroot
More information about the buildroot
mailing list