[Buildroot] [PATCH 2/2] Initial support for PandaBoard and PandaBoard ES

Nicolas Dechesne n-dechesne at ti.com
Sun Feb 5 00:35:47 UTC 2012


This is a default configuration for Panda and PandaES, tested on both
platforms.

DEVTMPFS is enabled, to use static dev configuration one would need
to update the generic dev table for ttyO driver.

Panda is well supported in mainline kernel with omap2plus_defconfig,
so this should be safe.

U-boot SPL support is enabled by default as x-loader is now
deprecated.

Signed-off-by: Nicolas Dechesne <n-dechesne at ti.com>
---
 configs/pandaboard_defconfig |   24 ++++++++++++++++++++++++
 1 files changed, 24 insertions(+), 0 deletions(-)
 create mode 100644 configs/pandaboard_defconfig

diff --git a/configs/pandaboard_defconfig b/configs/pandaboard_defconfig
new file mode 100644
index 0000000..64000f2
--- /dev/null
+++ b/configs/pandaboard_defconfig
@@ -0,0 +1,24 @@
+# Architecture
+BR2_arm=y
+BR2_cortex_a9=y
+
+# system
+BR2_TARGET_GENERIC_GETTY=y
+BR2_TARGET_GENERIC_GETTY_PORT="ttyO2"
+BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_DEVTMPFS=y
+
+# filesystem
+BR2_TARGET_ROOTFS_EXT2=y
+# BR2_TARGET_ROOTFS_TAR is not set
+
+# Kernel
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_DEFCONFIG="omap2plus"
+
+# GCC
+BR2_GCC_VERSION_4_6_X=y
+
+# Bootloaders
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BOARDNAME="omap4_panda"
+BR2_TARGET_UBOOT_SPL=y
-- 
1.7.8.3



More information about the buildroot mailing list