[Buildroot] Toolchain generate invalid executable format

Thomas De Schampheleire patrickdepinguin+buildroot at gmail.com
Tue Sep 20 07:41:01 UTC 2011


Hi,

On Mon, Sep 19, 2011 at 11:31 PM, Marc Leclerc
<marc-leclerc at signaturealpha.com> wrote:
> Hi,
>
> first thanks for your time, appreciated.
>
> I was under the impression that the environement (target) was built using
> the downloaded toolchain and assuming this, shouldn't the applications built
> with the toolchain have problem as well.

It depends on what the underlying problem is. Maybe your application
does something 'special' that is interpreted differently now.

How do you compile your application?
Did you try compiling a hello world application in exactly the same
way as you build your application?

>
> I have tried loading the application with gdb which tell me the file is
> invalid format.

Which gdb are you using and where are you running it?
Your buildroot configuration does not show a gdb for the host being
built, so I assume you are using the target gdb on your host, or the
target gdb on target.
I have to say that I'm unfamiliar with embedded development on x86
targets, so I can only try to guide you in general ways.

Best regards,
Thomas

>
> The target is a Vortex86DX and has a floating point unit.
>
> Both executable also runs on my host (i5)
>
> The only difference in gcc -v output are paths and gcc version (4.3.5 vs
> 4.3.6) and --disable-libomp
>
> Does any of this makes sence?
>
> Regards
> Marc
>
> On 2011-09-17 07:12, Thomas De Schampheleire wrote:
>>
>> Hi,
>>
>> On Fri, Sep 16, 2011 at 10:33 PM, Marc Leclerc
>> <marc-leclerc at signaturealpha.com>  wrote:
>>>
>>> If it may help here is the -v output of the gcc compiler and output from
>>> compiling my app
>>>
>>> Thanks
>>
>> At least on my host, both apps you sent run fine. The 'file' command
>> also shows that both apps are built for i486 (I was thinking you had a
>> binary for the wrong architecture).
>>
>> If you get a specific invalid instruction exception, you should try to
>> figure out which instruction it is. An example could be that your new
>> app is compiled with hardware-floating point instructions, while your
>> processor doesn't have such floating point unit.
>>
>> It's a good idea to compare the output you gave below for both your
>> toolchains, and see if there is a difference...
>>
>> Thomas
>>
>>>
>>> marc at Vostro-Linux:~/Smartlinks/DNP3/sa_DNP3$ i486-linux-gcc -v
>>> Using built-in specs.
>>> Target: i486-unknown-linux-uclibc
>>> Configured with:
>>> /home/marc/buildroot/output/toolchain/gcc-4.3.6/configure
>>> --prefix=/home/marc/buildroot/output/host/usr --build=i686-pc-linux-gnu
>>> --host=i686-pc-linux-gnu --target=i486-unknown-linux-uclibc
>>> --enable-languages=c
>>>
>>> --with-sysroot=/home/marc/buildroot/output/host/usr/i486-unknown-linux-uclibc/sysroot
>>>
>>> --with-build-time-tools=/home/marc/buildroot/output/host/usr/i486-unknown-linux-uclibc/bin
>>> --disable-__cxa_atexit --enable-target-optspace --disable-libgomp
>>> --with-gnu-ld --disable-libssp --disable-multilib --disable-tls
>>> --disable-shared --with-gmp=/home/marc/buildroot/output/host/usr
>>> --with-mpfr=/home/marc/buildroot/output/host/usr --enable-threads
>>> --disable-decimal-float --with-arch=i486 --with-tune=i486
>>> --with-pkgversion='Buildroot 2011.08'
>>> --with-bugurl=http://bugs.buildroot.net/
>>> Thread model: posix
>>> gcc version 4.3.6 (Buildroot 2011.08)
>>> marc at Vostro-Linux:~/Smartlinks/DNP3/sa_DNP3$ make
>>> i486-linux-gcc -c -g -I ../ -I ../../sa_shared/ -DTMW_LINUX_TARGET
>>> -DSA_DNP3
>>> \
>>>    -oobj_gcc/sa_DNP3.o \
>>>    sa_DNP3.c
>>> i486-linux-gcc -c  -g -I ../ -I ../../sa_shared/ -DTMW_LINUX_TARGET
>>> -DSA_DNP3  \
>>>                 \
>>>                -oobj_gcc/vdx_gpio.o \
>>>                ../../sa_shared/vdx_gpio.c
>>> i486-linux-gcc -c  -g -I ../ -I ../../sa_shared/ -DTMW_LINUX_TARGET
>>> -DSA_DNP3  \
>>>                 \
>>>                -oobj_gcc/vdx_isaio.o \
>>>                ../../sa_shared/vdx_isaio.c
>>> i486-linux-gcc -c  -g -I ../ -I ../../sa_shared/ -DTMW_LINUX_TARGET
>>> -DSA_DNP3  \
>>>                 \
>>>                -oobj_gcc/sa_simulate.o \
>>>                ../../sa_shared/sa_simulate.c
>>> i486-linux-gcc -c  -g -I ../ -I ../../sa_shared/ -DTMW_LINUX_TARGET
>>> -DSA_DNP3  \
>>>                 \
>>>                -oobj_gcc/sa_comtrade.o \
>>>                ../../sa_shared/sa_comtrade.c
>>> i486-linux-gcc -c  -g -I ../ -I ../../sa_shared/ -DTMW_LINUX_TARGET
>>> -DSA_DNP3  \
>>>                 \
>>>                -oobj_gcc/sa_calculation.o \
>>>                ../../sa_shared/sa_calculation.c
>>> i486-linux-gcc -c  -g -I ../ -I ../../sa_shared/ -DTMW_LINUX_TARGET
>>> -DSA_DNP3  \
>>>                 \
>>>                -oobj_gcc/sa_config.o \
>>>                ../../sa_shared/sa_config.c
>>> i486-linux-gcc -g -static -o ../bin/sa_DNP3 \
>>>    obj_gcc/sa_DNP3.o \
>>>    obj_gcc/vdx_gpio.o \
>>>    obj_gcc/vdx_isaio.o \
>>>    obj_gcc/sa_simulate.o \
>>>    obj_gcc/sa_comtrade.o \
>>>    obj_gcc/sa_calculation.o \
>>>    obj_gcc/sa_config.o \
>>>    ../tmwscl/dnp.lib ../tmwscl/utils.lib ../liniotarg.lib -lpthread
>>>
>>>
>>>
>>> On 2011-09-16 07:07, Marc Leclerc wrote:
>>>>
>>>> Hi,
>>>>
>>>> BR2_i386=y
>>>> BR2_x86_i486=y
>>>>
>>>>
>>>> BR2_GCC_TARGET_TUNE="i486"
>>>> BR2_GCC_TARGET_ARCH="i486"
>>>>
>>>> Thanks
>>>>
>>>> On 2011-09-16 01:36, Thomas De Schampheleire wrote:
>>>>>
>>>>> Hi,
>>>>>
>>>>> On Thu, Sep 15, 2011 at 10:57 PM, Marc Leclerc
>>>>> <marc-leclerc at signaturealpha.com>    wrote:
>>>>>>
>>>>>> Hi,
>>>>>>
>>>>>> Finally got a working environment after going back to the version of
>>>>>> tools I
>>>>>> had on my previous setup beside the kernel (now 3.0.4)
>>>>>>
>>>>>> One big problem though when I compile my application from my
>>>>>> workstation
>>>>>> using the buildroot toolchain it no longer runs on my target leaving
>>>>>> an
>>>>>> illegal instruction message. gdb (6.8) say the file format is not
>>>>>> recognized. if i take the same app compiled with my previous setup it
>>>>>> runs
>>>>>> fine (no changes have been made to the source, only had to change the
>>>>>> PATH
>>>>>> (to the compiler) since it changed from the buildroot version I was
>>>>>> using.
>>>>>
>>>>> What architecture is your target?
>>>>> What is the output of 'file<your-application>' ?
>>>>>
>>>>>> Here is my buildroot .config, hopefully this is only caused by a
>>>>>> change
>>>>>> in
>>>>>> default configuration
>>>>>>
>>>>>> Thanks
>>>>>>
>>>>>> #
>>>>>> # Automatically generated make config: don't edit
>>>>>> # Buildroot 2011.08 Configuration
>>>>>> # Thu Sep 15 14:57:25 2011
>>>>>> #
>>>>>> BR2_HAVE_DOT_CONFIG=y
>>>>>> # BR2_arm is not set
>>>>>> # BR2_armeb is not set
>>>>>> # BR2_avr32 is not set
>>>>>> # BR2_bfin is not set
>>>>>> BR2_i386=y
>>>>>> # BR2_mips is not set
>>>>>> # BR2_mipsel is not set
>>>>>> # BR2_powerpc is not set
>>>>>> # BR2_sh is not set
>>>>>> # BR2_sh64 is not set
>>>>>> # BR2_sparc is not set
>>>>>> # BR2_x86_64 is not set
>>>>>> # BR2_xtensa is not set
>>>>>> # BR2_x86_i386 is not set
>>>>>> BR2_x86_i486=y
>>>>>> # BR2_x86_i586 is not set
>>>>>> # BR2_x86_i686 is not set
>>>>>> # BR2_x86_pentiumpro is not set
>>>>>> # BR2_x86_pentium_mmx is not set
>>>>>> # BR2_x86_pentium_m is not set
>>>>>> # BR2_x86_pentium2 is not set
>>>>>> # BR2_x86_pentium3 is not set
>>>>>> # BR2_x86_pentium4 is not set
>>>>>> # BR2_x86_prescott is not set
>>>>>> # BR2_x86_nocona is not set
>>>>>> # BR2_x86_core2 is not set
>>>>>> # BR2_x86_k6 is not set
>>>>>> # BR2_x86_k6_2 is not set
>>>>>> # BR2_x86_athlon is not set
>>>>>> # BR2_x86_athlon_4 is not set
>>>>>> # BR2_x86_opteron is not set
>>>>>> # BR2_x86_opteron_sse3 is not set
>>>>>> # BR2_x86_barcelona is not set
>>>>>> # BR2_x86_geode is not set
>>>>>> # BR2_x86_c3 is not set
>>>>>> # BR2_x86_c32 is not set
>>>>>> # BR2_x86_winchip_c6 is not set
>>>>>> # BR2_x86_winchip2 is not set
>>>>>> BR2_ARCH="i486"
>>>>>> BR2_ENDIAN="LITTLE"
>>>>>> BR2_GCC_TARGET_TUNE="i486"
>>>>>> BR2_GCC_TARGET_ARCH="i486"
>>>>>>
>>>>>> #
>>>>>> # Build options
>>>>>> #
>>>>>>
>>>>>> #
>>>>>> # Commands
>>>>>> #
>>>>>> BR2_WGET="wget --passive-ftp -nd -t 3"
>>>>>> BR2_SVN="svn"
>>>>>> BR2_BZR="bzr"
>>>>>> BR2_GIT="git"
>>>>>> BR2_ZCAT="gzip -d -c"
>>>>>> BR2_BZCAT="bzcat"
>>>>>> BR2_XZCAT="xzcat"
>>>>>> BR2_TAR_OPTIONS=""
>>>>>> BR2_DL_DIR="$(TOPDIR)/dl"
>>>>>> BR2_HOST_DIR="$(BASE_DIR)/host"
>>>>>>
>>>>>> #
>>>>>> # Mirrors and Download locations
>>>>>> #
>>>>>> BR2_PRIMARY_SITE=""
>>>>>> BR2_BACKUP_SITE="http://sources.buildroot.net/"
>>>>>> BR2_SOURCEFORGE_MIRROR="kent"
>>>>>> BR2_KERNEL_MIRROR="http://www.kernel.org/pub/"
>>>>>> BR2_GNU_MIRROR="http://ftp.gnu.org/pub/gnu"
>>>>>> BR2_DEBIAN_MIRROR="http://ftp.debian.org"
>>>>>> BR2_JLEVEL=2
>>>>>> # BR2_CCACHE is not set
>>>>>> # BR2_DEPRECATED is not set
>>>>>> # BR2_ENABLE_DEBUG is not set
>>>>>> BR2_STRIP_strip=y
>>>>>> # BR2_STRIP_sstrip is not set
>>>>>> # BR2_STRIP_none is not set
>>>>>> # BR2_OPTIMIZE_0 is not set
>>>>>> # BR2_OPTIMIZE_1 is not set
>>>>>> # BR2_OPTIMIZE_2 is not set
>>>>>> # BR2_OPTIMIZE_3 is not set
>>>>>> BR2_OPTIMIZE_S=y
>>>>>> # BR2_PREFER_STATIC_LIB is not set
>>>>>> # BR2_HAVE_DOCUMENTATION is not set
>>>>>> # BR2_HAVE_DEVFILES is not set
>>>>>>
>>>>>> #
>>>>>> # Toolchain
>>>>>> #
>>>>>> BR2_TOOLCHAIN_BUILDROOT=y
>>>>>> # BR2_TOOLCHAIN_EXTERNAL is not set
>>>>>> # BR2_TOOLCHAIN_CTNG is not set
>>>>>>
>>>>>> #
>>>>>> # Kernel Header Options
>>>>>> #
>>>>>> # BR2_KERNEL_HEADERS_2_6_35 is not set
>>>>>> # BR2_KERNEL_HEADERS_2_6_36 is not set
>>>>>> # BR2_KERNEL_HEADERS_2_6_37 is not set
>>>>>> # BR2_KERNEL_HEADERS_2_6_38 is not set
>>>>>> # BR2_KERNEL_HEADERS_2_6_39 is not set
>>>>>> BR2_KERNEL_HEADERS_3_0=y
>>>>>> # BR2_KERNEL_HEADERS_VERSION is not set
>>>>>> # BR2_KERNEL_HEADERS_SNAP is not set
>>>>>> BR2_DEFAULT_KERNEL_HEADERS="3.0.4"
>>>>>>
>>>>>> #
>>>>>> # uClibc Options
>>>>>> #
>>>>>> # BR2_UCLIBC_VERSION_0_9_31 is not set
>>>>>> BR2_UCLIBC_VERSION_0_9_32=y
>>>>>> # BR2_UCLIBC_VERSION_SNAPSHOT is not set
>>>>>> BR2_UCLIBC_VERSION_STRING="0.9.32"
>>>>>> BR2_UCLIBC_CONFIG="toolchain/uClibc/uClibc-0.9.32.config"
>>>>>> # BR2_PTHREAD_DEBUG is not set
>>>>>> # BR2_UCLIBC_INSTALL_TEST_SUITE is not set
>>>>>>
>>>>>> #
>>>>>> # Binutils Options
>>>>>> #
>>>>>> # BR2_BINUTILS_VERSION_2_20 is not set
>>>>>> BR2_BINUTILS_VERSION_2_20_1=y
>>>>>> # BR2_BINUTILS_VERSION_2_21 is not set
>>>>>> # BR2_BINUTILS_VERSION_2_21_1 is not set
>>>>>> BR2_BINUTILS_VERSION="2.20.1"
>>>>>> BR2_BINUTILS_EXTRA_CONFIG_OPTIONS=""
>>>>>>
>>>>>> #
>>>>>> # GCC Options
>>>>>> #
>>>>>> # BR2_GCC_VERSION_4_2_4 is not set
>>>>>> BR2_GCC_VERSION_4_3_X=y
>>>>>> # BR2_GCC_VERSION_4_4_X is not set
>>>>>> # BR2_GCC_VERSION_4_5_X is not set
>>>>>> # BR2_GCC_VERSION_4_6_X is not set
>>>>>> # BR2_GCC_VERSION_SNAP is not set
>>>>>> BR2_GCC_SUPPORTS_FINEGRAINEDMTUNE=y
>>>>>> BR2_GCC_VERSION="4.3.6"
>>>>>> BR2_EXTRA_GCC_CONFIG_OPTIONS=""
>>>>>> # BR2_INSTALL_OBJC is not set
>>>>>> # BR2_INSTALL_FORTRAN is not set
>>>>>> # BR2_GCC_SHARED_LIBGCC is not set
>>>>>> # BR2_GCC_ENABLE_OPENMP is not set
>>>>>>
>>>>>> #
>>>>>> # Gdb Options
>>>>>> #
>>>>>> BR2_PACKAGE_GDB=y
>>>>>> BR2_PACKAGE_GDB_SERVER=y
>>>>>> # BR2_PACKAGE_GDB_HOST is not set
>>>>>> # BR2_GDB_VERSION_6_7_1 is not set
>>>>>> BR2_GDB_VERSION_6_8=y
>>>>>> # BR2_GDB_VERSION_7_0_1 is not set
>>>>>> # BR2_GDB_VERSION_7_1 is not set
>>>>>> BR2_GDB_VERSION="6.8"
>>>>>> BR2_LARGEFILE=y
>>>>>> BR2_INET_IPV6=y
>>>>>> BR2_INET_RPC=y
>>>>>> BR2_USE_WCHAR=y
>>>>>> BR2_ENABLE_LOCALE=y
>>>>>> BR2_TOOLCHAIN_HAS_THREADS=y
>>>>>> BR2_TOOLCHAIN_HAS_SHADOW_PASSWORDS=y
>>>>>> # BR2_ENABLE_LOCALE_PURGE is not set
>>>>>> BR2_NEEDS_GETTEXT=y
>>>>>> BR2_NEEDS_GETTEXT_IF_LOCALE=y
>>>>>> BR2_USE_MMU=y
>>>>>> BR2_TARGET_OPTIMIZATION="-pipe"
>>>>>> BR2_TARGET_LDFLAGS=""
>>>>>>
>>>>>> #
>>>>>> # Toolchain Options
>>>>>> #
>>>>>> BR2_TOOLCHAIN_BUILDROOT_LARGEFILE=y
>>>>>> BR2_TOOLCHAIN_BUILDROOT_INET_IPV6=y
>>>>>> BR2_TOOLCHAIN_BUILDROOT_INET_RPC=y
>>>>>> BR2_TOOLCHAIN_BUILDROOT_WCHAR=y
>>>>>> BR2_TOOLCHAIN_BUILDROOT_LOCALE=y
>>>>>> # BR2_TOOLCHAIN_BUILDROOT_CXX is not set
>>>>>> # BR2_TOOLCHAIN_BUILDROOT_USE_SSP is not set
>>>>>> # BR2_PTHREADS_NONE is not set
>>>>>> # BR2_PTHREADS is not set
>>>>>> BR2_PTHREADS_OLD=y
>>>>>> # BR2_PTHREADS_NATIVE is not set
>>>>>>
>>>>>> #
>>>>>> # System configuration
>>>>>> #
>>>>>> BR2_TARGET_GENERIC_HOSTNAME="buildroot"
>>>>>> BR2_TARGET_GENERIC_ISSUE="Welcome to Buildroot"
>>>>>> BR2_ROOTFS_DEVICE_CREATION_STATIC=y
>>>>>> # BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_DEVTMPFS is not set
>>>>>> # BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_MDEV is not set
>>>>>> # BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_UDEV is not set
>>>>>> BR2_ROOTFS_DEVICE_TABLE="target/generic/device_table.txt"
>>>>>> BR2_ROOTFS_STATIC_DEVICE_TABLE="target/generic/device_table_dev.txt"
>>>>>> BR2_ROOTFS_SKELETON_DEFAULT=y
>>>>>> # BR2_ROOTFS_SKELETON_CUSTOM is not set
>>>>>> BR2_TARGET_GENERIC_GETTY_PORT="ttyS0"
>>>>>> # BR2_TARGET_GENERIC_GETTY_BAUDRATE_KEEP is not set
>>>>>> # BR2_TARGET_GENERIC_GETTY_BAUDRATE_9600 is not set
>>>>>> # BR2_TARGET_GENERIC_GETTY_BAUDRATE_19200 is not set
>>>>>> # BR2_TARGET_GENERIC_GETTY_BAUDRATE_38400 is not set
>>>>>> # BR2_TARGET_GENERIC_GETTY_BAUDRATE_57600 is not set
>>>>>> BR2_TARGET_GENERIC_GETTY_BAUDRATE_115200=y
>>>>>> BR2_TARGET_GENERIC_GETTY_BAUDRATE="115200"
>>>>>> BR2_TARGET_GENERIC_REMOUNT_ROOTFS_RW=y
>>>>>> BR2_ROOTFS_POST_BUILD_SCRIPT="custom/copy_etc.sh"
>>>>>>
>>>>>> #
>>>>>> # Package Selection for the target
>>>>>> #
>>>>>> BR2_PACKAGE_BUSYBOX=y
>>>>>> # BR2_BUSYBOX_VERSION_1_16_X is not set
>>>>>> # BR2_BUSYBOX_VERSION_1_17_X is not set
>>>>>> BR2_BUSYBOX_VERSION_1_18_X=y
>>>>>> # BR2_PACKAGE_BUSYBOX_SNAPSHOT is not set
>>>>>> BR2_BUSYBOX_VERSION="1.18.5"
>>>>>> BR2_PACKAGE_BUSYBOX_CONFIG="vortex86/busybox.config"
>>>>>> BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y
>>>>>> # BR2_PACKAGE_CUSTOMIZE is not set
>>>>>>
>>>>>> #
>>>>>> # Audio and video libraries and applications
>>>>>> #
>>>>>> # BR2_PACKAGE_ALSA_LIB is not set
>>>>>> # BR2_PACKAGE_ALSA_UTILS is not set
>>>>>> # BR2_PACKAGE_AUMIX is not set
>>>>>> # BR2_PACKAGE_FAAD2 is not set
>>>>>> # BR2_PACKAGE_FLAC is not set
>>>>>> # BR2_PACKAGE_FFMPEG is not set
>>>>>> # BR2_PACKAGE_GSTREAMER is not set
>>>>>> # BR2_PACKAGE_LAME is not set
>>>>>> # BR2_PACKAGE_LIBAO is not set
>>>>>> # BR2_PACKAGE_LIBCDAUDIO is not set
>>>>>> # BR2_PACKAGE_LIBCUE is not set
>>>>>> # BR2_PACKAGE_LIBCUEFILE is not set
>>>>>> # BR2_PACKAGE_LIBDVDREAD is not set
>>>>>> # BR2_PACKAGE_LIBDVDNAV is not set
>>>>>> # BR2_PACKAGE_LIBID3TAG is not set
>>>>>> # BR2_PACKAGE_LIBMAD is not set
>>>>>> # BR2_PACKAGE_LIBMMS is not set
>>>>>> # BR2_PACKAGE_LIBMPD is not set
>>>>>> # BR2_PACKAGE_LIBMPEG2 is not set
>>>>>> # BR2_PACKAGE_LIBOGG is not set
>>>>>> # BR2_PACKAGE_LIBREPLAYGAIN is not set
>>>>>> # BR2_PACKAGE_LIBSAMPLERATE is not set
>>>>>> # BR2_PACKAGE_LIBSNDFILE is not set
>>>>>> # BR2_PACKAGE_LIBTHEORA is not set
>>>>>> # BR2_PACKAGE_LIBVORBIS is not set
>>>>>>
>>>>>> #
>>>>>> # Live555 needs C++ compiler
>>>>>> #
>>>>>> # BR2_PACKAGE_MADPLAY is not set
>>>>>>
>>>>>> #
>>>>>> # mpd requires a toolchain with C++ and WCHAR support
>>>>>> #
>>>>>> # BR2_PACKAGE_MPG123 is not set
>>>>>> # BR2_PACKAGE_MPLAYER is not set
>>>>>> # BR2_PACKAGE_MUSEPACK is not set
>>>>>> # BR2_PACKAGE_SPEEX is not set
>>>>>>
>>>>>> #
>>>>>> # swfdec requires a toolchain with WCHAR and C++ support
>>>>>> #
>>>>>>
>>>>>> #
>>>>>> # taglib requires a toolchain with C++ support enabled
>>>>>> #
>>>>>> # BR2_PACKAGE_TREMOR is not set
>>>>>> # BR2_PACKAGE_VORBIS_TOOLS is not set
>>>>>> # BR2_PACKAGE_WAVPACK is not set
>>>>>>
>>>>>> #
>>>>>> # Compressors and decompressors
>>>>>> #
>>>>>> # BR2_PACKAGE_BZIP2 is not set
>>>>>> # BR2_PACKAGE_GZIP is not set
>>>>>> # BR2_PACKAGE_LZOP is not set
>>>>>> # BR2_PACKAGE_XZ is not set
>>>>>>
>>>>>> #
>>>>>> # Debugging, profiling and benchmark
>>>>>> #
>>>>>>
>>>>>> #
>>>>>> # bonnie++ requires a toolchain with C++ support enabled
>>>>>> #
>>>>>> BR2_PACKAGE_DHRYSTONE=y
>>>>>> # BR2_PACKAGE_DMALLOC is not set
>>>>>> # BR2_PACKAGE_KEXEC is not set
>>>>>> BR2_PACKAGE_LMBENCH=y
>>>>>> BR2_PACKAGE_LSOF=y
>>>>>> # BR2_PACKAGE_LTP_TESTSUITE is not set
>>>>>> BR2_PACKAGE_LTRACE=y
>>>>>> BR2_PACKAGE_MEMSTAT=y
>>>>>> # BR2_PACKAGE_NETPERF is not set
>>>>>>
>>>>>> #
>>>>>> # oprofile requires a toolchain with C++ support enabled
>>>>>> #
>>>>>> BR2_PACKAGE_STRACE=y
>>>>>> # BR2_PACKAGE_WHETSTONE is not set
>>>>>> # BR2_PACKAGE_VALGRIND is not set
>>>>>>
>>>>>> #
>>>>>> # Development tools
>>>>>> #
>>>>>> # BR2_PACKAGE_AUTOCONF is not set
>>>>>> # BR2_PACKAGE_AUTOMAKE is not set
>>>>>> # BR2_PACKAGE_BINUTILS is not set
>>>>>> # BR2_PACKAGE_BISON is not set
>>>>>> # BR2_PACKAGE_BSDIFF is not set
>>>>>> # BR2_PACKAGE_CCACHE is not set
>>>>>> # BR2_PACKAGE_COREUTILS is not set
>>>>>> # BR2_PACKAGE_CVS is not set
>>>>>> # BR2_PACKAGE_DIFFUTILS is not set
>>>>>> # BR2_PACKAGE_DISTCC is not set
>>>>>> # BR2_PACKAGE_FINDUTILS is not set
>>>>>> # BR2_PACKAGE_FLEX is not set
>>>>>> # BR2_PACKAGE_GAWK is not set
>>>>>>
>>>>>> #
>>>>>> # gcc needs development files in target filesystem
>>>>>> #
>>>>>> # BR2_PACKAGE_GETTEXT is not set
>>>>>> # BR2_PACKAGE_LIBINTL is not set
>>>>>> # BR2_PACKAGE_GMP is not set
>>>>>>
>>>>>> #
>>>>>> # gperf requires a toolchain with C++ support enabled
>>>>>> #
>>>>>> # BR2_PACKAGE_GREP is not set
>>>>>> # BR2_PACKAGE_MAKE is not set
>>>>>> # BR2_PACKAGE_MPC is not set
>>>>>> # BR2_PACKAGE_MPFR is not set
>>>>>> # BR2_PACKAGE_LIBTOOL is not set
>>>>>> # BR2_PACKAGE_M4 is not set
>>>>>> # BR2_PACKAGE_PATCH is not set
>>>>>> # BR2_PACKAGE_PKG_CONFIG is not set
>>>>>> # BR2_PACKAGE_SED is not set
>>>>>> # BR2_PACKAGE_SSTRIP is not set
>>>>>> # BR2_PACKAGE_TAR is not set
>>>>>>
>>>>>> #
>>>>>> # Games
>>>>>> #
>>>>>> # BR2_PACKAGE_GNUCHESS is not set
>>>>>> # BR2_PACKAGE_PRBOOM is not set
>>>>>>
>>>>>> #
>>>>>> # Graphic libraries and applications (graphic/text)
>>>>>> #
>>>>>>
>>>>>> #
>>>>>> # Graphic applications
>>>>>> #
>>>>>> # BR2_PACKAGE_RRDTOOL is not set
>>>>>>
>>>>>> #
>>>>>> # graphic libraries
>>>>>> #
>>>>>> # BR2_PACKAGE_DIRECTFB is not set
>>>>>> # BR2_PACKAGE_FBDUMP is not set
>>>>>> # BR2_PACKAGE_FBGRAB is not set
>>>>>> # BR2_PACKAGE_FBSET is not set
>>>>>> # BR2_PACKAGE_FBV is not set
>>>>>> # BR2_PACKAGE_IMAGEMAGICK is not set
>>>>>> # BR2_PACKAGE_LINUX_FUSION is not set
>>>>>> # BR2_PACKAGE_SDL is not set
>>>>>>
>>>>>> #
>>>>>> # other GUIs
>>>>>> #
>>>>>>
>>>>>> #
>>>>>> # qt requires a toolchain with C++ support enabled
>>>>>> #
>>>>>> # BR2_PACKAGE_XORG7 is not set
>>>>>>
>>>>>> #
>>>>>> # X libraries and helper libraries
>>>>>> #
>>>>>> # BR2_PACKAGE_LIBERATION is not set
>>>>>>
>>>>>> #
>>>>>> # X Window managers
>>>>>> #
>>>>>>
>>>>>> #
>>>>>> # X applications
>>>>>> #
>>>>>> # BR2_PACKAGE_GOB2 is not set
>>>>>>
>>>>>> #
>>>>>> # midori requires C++, WCHAR in toolchain and libgtk2
>>>>>> #
>>>>>>
>>>>>> #
>>>>>> # Hardware handling
>>>>>> #
>>>>>> # BR2_PACKAGE_ACPID is not set
>>>>>> # BR2_PACKAGE_CDRKIT is not set
>>>>>> # BR2_PACKAGE_CRAMFS is not set
>>>>>>
>>>>>> #
>>>>>> # dbus not available (need expat or libxml2)
>>>>>> #
>>>>>> # BR2_PACKAGE_DMRAID is not set
>>>>>> # BR2_PACKAGE_DOSFSTOOLS is not set
>>>>>> BR2_PACKAGE_E2FSPROGS=y
>>>>>> BR2_PACKAGE_E2FSPROGS_BADBLOCKS=y
>>>>>> BR2_PACKAGE_E2FSPROGS_CHATTR=y
>>>>>> # BR2_PACKAGE_E2FSPROGS_DEBUGFS is not set
>>>>>> BR2_PACKAGE_E2FSPROGS_DUMPE2FS=y
>>>>>> BR2_PACKAGE_E2FSPROGS_E2FREEFRAG=y
>>>>>> BR2_PACKAGE_E2FSPROGS_E2FSCK=y
>>>>>> # BR2_PACKAGE_E2FSPROGS_E2IMAGE is not set
>>>>>> BR2_PACKAGE_E2FSPROGS_E2LABEL=y
>>>>>> BR2_PACKAGE_E2FSPROGS_E2UNDO=y
>>>>>> BR2_PACKAGE_E2FSPROGS_FILEFRAG=y
>>>>>> BR2_PACKAGE_E2FSPROGS_FINDFS=y
>>>>>> BR2_PACKAGE_E2FSPROGS_FSCK=y
>>>>>> BR2_PACKAGE_E2FSPROGS_LOGSAVE=y
>>>>>> BR2_PACKAGE_E2FSPROGS_LSATTR=y
>>>>>> BR2_PACKAGE_E2FSPROGS_MKE2FS=y
>>>>>> BR2_PACKAGE_E2FSPROGS_MKLOSTFOUND=y
>>>>>> # BR2_PACKAGE_E2FSPROGS_RESIZE2FS is not set
>>>>>> BR2_PACKAGE_E2FSPROGS_TUNE2FS=y
>>>>>> BR2_PACKAGE_E2FSPROGS_UUIDGEN=y
>>>>>> BR2_PACKAGE_E2FSPROGS_UUIDD=y
>>>>>> # BR2_PACKAGE_EEPROG is not set
>>>>>> # BR2_PACKAGE_FCONFIG is not set
>>>>>> # BR2_PACKAGE_FIS is not set
>>>>>> # BR2_PACKAGE_GADGETFS_TEST is not set
>>>>>>
>>>>>> #
>>>>>> # gdisk requires a toolchain with LARGEFILE/WCHAR/C++ support enabled
>>>>>> #
>>>>>> # BR2_PACKAGE_GENEXT2FS is not set
>>>>>> # BR2_PACKAGE_GENROMFS is not set
>>>>>> # BR2_PACKAGE_GPSD is not set
>>>>>> # BR2_PACKAGE_GVFS is not set
>>>>>> # BR2_PACKAGE_HDPARM is not set
>>>>>> # BR2_PACKAGE_HWDATA is not set
>>>>>> # BR2_PACKAGE_I2C_TOOLS is not set
>>>>>> # BR2_PACKAGE_INPUT_EVENT_DAEMON is not set
>>>>>> # BR2_PACKAGE_INPUT_TOOLS is not set
>>>>>> BR2_PACKAGE_IOSTAT=y
>>>>>> # BR2_PACKAGE_IRDA_UTILS is not set
>>>>>> # BR2_PACKAGE_KBD is not set
>>>>>> # BR2_PACKAGE_LIBV4L is not set
>>>>>> # BR2_PACKAGE_LM_SENSORS is not set
>>>>>> # BR2_PACKAGE_LSUIO is not set
>>>>>> # BR2_PACKAGE_LVM2 is not set
>>>>>> BR2_PACKAGE_MAKEDEVS=y
>>>>>> # BR2_PACKAGE_MDADM is not set
>>>>>> # BR2_PACKAGE_MEMTESTER is not set
>>>>>> # BR2_PACKAGE_MTD is not set
>>>>>> # BR2_PACKAGE_NTFS_3G is not set
>>>>>> # BR2_PACKAGE_NTFSPROGS is not set
>>>>>> BR2_PACKAGE_PCIUTILS=y
>>>>>> # BR2_PACKAGE_RNG_TOOLS is not set
>>>>>> # BR2_PACKAGE_SDPARM is not set
>>>>>> BR2_PACKAGE_SETSERIAL=y
>>>>>>
>>>>>> #
>>>>>> # smartmontools requires a toolchain with C++ support enabled
>>>>>> #
>>>>>> # BR2_PACKAGE_SQUASHFS is not set
>>>>>> # BR2_PACKAGE_SREDIRD is not set
>>>>>> # BR2_PACKAGE_SSHFS is not set
>>>>>> BR2_PACKAGE_STATSERIAL=y
>>>>>> # BR2_PACKAGE_SYSSTAT is not set
>>>>>> # BR2_PACKAGE_TI_UTILS is not set
>>>>>> # BR2_PACKAGE_UBOOT_TOOLS is not set
>>>>>>
>>>>>> #
>>>>>> # udev requires /dev mgmnt set to udev under System configuration
>>>>>> #
>>>>>> # BR2_PACKAGE_USB_MODESWITCH is not set
>>>>>> # BR2_PACKAGE_USBUTILS is not set
>>>>>> # BR2_PACKAGE_WIPE is not set
>>>>>> # BR2_PACKAGE_XFSPROGS is not set
>>>>>>
>>>>>> #
>>>>>> # Interpreter languages and scripting
>>>>>> #
>>>>>> # BR2_PACKAGE_HASERL is not set
>>>>>> # BR2_PACKAGE_LUA is not set
>>>>>> # BR2_PACKAGE_MICROPERL is not set
>>>>>> # BR2_PACKAGE_PHP is not set
>>>>>> # BR2_PACKAGE_PYTHON is not set
>>>>>> # BR2_PACKAGE_RUBY is not set
>>>>>> # BR2_PACKAGE_TCL is not set
>>>>>>
>>>>>> #
>>>>>> # Libraries
>>>>>> #
>>>>>>
>>>>>> #
>>>>>> # Compression and decompression
>>>>>> #
>>>>>> # BR2_PACKAGE_LIBARCHIVE is not set
>>>>>> # BR2_PACKAGE_LZO is not set
>>>>>> BR2_PACKAGE_ZLIB=y
>>>>>>
>>>>>> #
>>>>>> # Crypto
>>>>>> #
>>>>>> # BR2_PACKAGE_BEECRYPT is not set
>>>>>> # BR2_PACKAGE_GNUTLS is not set
>>>>>> # BR2_PACKAGE_LIBGCRYPT is not set
>>>>>> # BR2_PACKAGE_LIBGPG_ERROR is not set
>>>>>> # BR2_PACKAGE_LIBNSS is not set
>>>>>> # BR2_PACKAGE_OPENSSL is not set
>>>>>>
>>>>>> #
>>>>>> # Database
>>>>>> #
>>>>>> # BR2_PACKAGE_BERKELEYDB is not set
>>>>>>
>>>>>> #
>>>>>> # Mysql client requires a toolchain with C++ support enabled
>>>>>> #
>>>>>> # BR2_PACKAGE_SQLITE is not set
>>>>>>
>>>>>> #
>>>>>> # Filesystem
>>>>>> #
>>>>>> # BR2_PACKAGE_GAMIN is not set
>>>>>> # BR2_PACKAGE_LIBCONFIG is not set
>>>>>> # BR2_PACKAGE_LIBCONFUSE is not set
>>>>>> # BR2_PACKAGE_LIBFUSE is not set
>>>>>> # BR2_PACKAGE_LIBLOCKFILE is not set
>>>>>> # BR2_PACKAGE_LIBSYSFS is not set
>>>>>>
>>>>>> #
>>>>>> # Graphics
>>>>>> #
>>>>>> # BR2_PACKAGE_ATK is not set
>>>>>> # BR2_PACKAGE_CAIRO is not set
>>>>>> # BR2_PACKAGE_FONTCONFIG is not set
>>>>>> # BR2_PACKAGE_FREETYPE is not set
>>>>>> # BR2_PACKAGE_JPEG is not set
>>>>>> # BR2_PACKAGE_LIBART is not set
>>>>>> # BR2_PACKAGE_LIBEXIF is not set
>>>>>> # BR2_PACKAGE_GDK_PIXBUF is not set
>>>>>>
>>>>>> #
>>>>>> # libgtk2 requires a toolchain with WCHAR and C++ support
>>>>>> #
>>>>>> # BR2_PACKAGE_LIBPNG is not set
>>>>>>
>>>>>> #
>>>>>> # libraw requires a toolchain with C++ support enabled
>>>>>> #
>>>>>> # BR2_PACKAGE_LIBSVGTINY is not set
>>>>>> # BR2_PACKAGE_LIBUNGIF is not set
>>>>>>
>>>>>> #
>>>>>> # pango requires a toolchain with WCHAR and C++ support
>>>>>> #
>>>>>> # BR2_PACKAGE_PIXMAN is not set
>>>>>> # BR2_PACKAGE_TIFF is not set
>>>>>>
>>>>>> #
>>>>>> # webkit requires C++, WCHAR in toolchain and libgtk2
>>>>>> #
>>>>>>
>>>>>> #
>>>>>> # Hardware handling
>>>>>> #
>>>>>> # BR2_PACKAGE_LIBAIO is not set
>>>>>> # BR2_PACKAGE_LIBRAW1394 is not set
>>>>>> # BR2_PACKAGE_TSLIB is not set
>>>>>> # BR2_PACKAGE_LIBHID is not set
>>>>>> # BR2_PACKAGE_LIBIQRF is not set
>>>>>> # BR2_PACKAGE_LIBUSB is not set
>>>>>>
>>>>>> #
>>>>>> # Networking
>>>>>> #
>>>>>> # BR2_PACKAGE_LIBCGI is not set
>>>>>>
>>>>>> #
>>>>>> # libcgicc requires a toolchain with C++ support enabled
>>>>>> #
>>>>>> # BR2_PACKAGE_LIBCURL is not set
>>>>>> # BR2_PACKAGE_LIBDNET is not set
>>>>>> # BR2_PACKAGE_LIBEXOSIP2 is not set
>>>>>> # BR2_PACKAGE_LIBIDN is not set
>>>>>> # BR2_PACKAGE_LIBMICROHTTPD is not set
>>>>>> # BR2_PACKAGE_NEON is not set
>>>>>> # BR2_PACKAGE_LIBMNL is not set
>>>>>> # BR2_PACKAGE_LIBNL is not set
>>>>>> # BR2_PACKAGE_LIBPCAP is not set
>>>>>> # BR2_PACKAGE_LIBOSIP2 is not set
>>>>>> # BR2_PACKAGE_LIBRSYNC is not set
>>>>>> # BR2_PACKAGE_LIBSOUP is not set
>>>>>> # BR2_PACKAGE_LIBUPNP is not set
>>>>>>
>>>>>> #
>>>>>> # Other
>>>>>> #
>>>>>> # BR2_PACKAGE_LIBARGTABLE2 is not set
>>>>>> # BR2_PACKAGE_ARGP_STANDALONE is not set
>>>>>> # BR2_PACKAGE_LIBATOMIC_OPS is not set
>>>>>> # BR2_PACKAGE_LIBCAP is not set
>>>>>> # BR2_PACKAGE_LIBDAEMON is not set
>>>>>> BR2_PACKAGE_LIBELF=y
>>>>>> # BR2_PACKAGE_LIBEVENT is not set
>>>>>> # BR2_PACKAGE_LIBFFI is not set
>>>>>> # BR2_PACKAGE_LIBGLIB2 is not set
>>>>>> # BR2_PACKAGE_LIBNSPR is not set
>>>>>>
>>>>>> #
>>>>>> # libsigc++ requires a toolchain with C++ support enabled
>>>>>> #
>>>>>> # BR2_PACKAGE_ORC is not set
>>>>>>
>>>>>> #
>>>>>> # Text and terminal handling
>>>>>> #
>>>>>>
>>>>>> #
>>>>>> # enchant requires a toolchain with C++ and WCHAR support enabled
>>>>>> #
>>>>>>
>>>>>> #
>>>>>> # icu requires a toolchain with C++ support and WCHAR enabled
>>>>>> #
>>>>>> BR2_PACKAGE_NCURSES=y
>>>>>> # BR2_PACKAGE_NCURSES_TARGET_PANEL is not set
>>>>>> # BR2_PACKAGE_NCURSES_TARGET_FORM is not set
>>>>>> # BR2_PACKAGE_NCURSES_TARGET_MENU is not set
>>>>>> # BR2_PACKAGE_NEWT is not set
>>>>>> # BR2_PACKAGE_PCRE is not set
>>>>>> # BR2_PACKAGE_POPT is not set
>>>>>> # BR2_PACKAGE_READLINE is not set
>>>>>> # BR2_PACKAGE_SLANG is not set
>>>>>>
>>>>>> #
>>>>>> # JSON/XML
>>>>>> #
>>>>>> # BR2_PACKAGE_EXPAT is not set
>>>>>> # BR2_PACKAGE_EZXML is not set
>>>>>> # BR2_PACKAGE_LIBROXML is not set
>>>>>> # BR2_PACKAGE_LIBXML2 is not set
>>>>>> # BR2_PACKAGE_LIBXSLT is not set
>>>>>> # BR2_PACKAGE_LIBYAML is not set
>>>>>> # BR2_PACKAGE_MXML is not set
>>>>>>
>>>>>> #
>>>>>> # xerces-c++ requires a toolchain with C++ and WCHAR support enabled
>>>>>> #
>>>>>> # BR2_PACKAGE_YAJL is not set
>>>>>>
>>>>>> #
>>>>>> # Miscellaneous
>>>>>> #
>>>>>> # BR2_PACKAGE_SHARED_MIME_INFO is not set
>>>>>>
>>>>>> #
>>>>>> # Networking applications
>>>>>> #
>>>>>> # BR2_PACKAGE_ARGUS is not set
>>>>>> # BR2_PACKAGE_AVAHI is not set
>>>>>> # BR2_PACKAGE_AXEL is not set
>>>>>> # BR2_PACKAGE_BOA is not set
>>>>>> # BR2_PACKAGE_BIND is not set
>>>>>> # BR2_PACKAGE_BMON is not set
>>>>>> # BR2_PACKAGE_BRIDGE is not set
>>>>>> # BR2_PACKAGE_BWM_NG is not set
>>>>>> # BR2_PACKAGE_CAN_UTILS is not set
>>>>>>
>>>>>> #
>>>>>> # ctorrent requires a toolchain with C++ support enabled
>>>>>> #
>>>>>> # BR2_PACKAGE_CUPS is not set
>>>>>> # BR2_PACKAGE_DHCP is not set
>>>>>> # BR2_PACKAGE_DHCPDUMP is not set
>>>>>> # BR2_PACKAGE_DNSMASQ is not set
>>>>>> BR2_PACKAGE_DROPBEAR=y
>>>>>> # BR2_PACKAGE_DROPBEAR_DISABLE_REVERSEDNS is not set
>>>>>> # BR2_PACKAGE_DROPBEAR_SMALL is not set
>>>>>> # BR2_PACKAGE_EBTABLES is not set
>>>>>> # BR2_PACKAGE_ETHTOOL is not set
>>>>>> # BR2_PACKAGE_HOSTAPD is not set
>>>>>> # BR2_PACKAGE_IFPLUGD is not set
>>>>>>
>>>>>> #
>>>>>> # iperf requires a toolchain with C++ support enabled
>>>>>> #
>>>>>> # BR2_PACKAGE_IPROUTE2 is not set
>>>>>> # BR2_PACKAGE_IPSEC_TOOLS is not set
>>>>>> # BR2_PACKAGE_IPSET is not set
>>>>>> # BR2_PACKAGE_IPTABLES is not set
>>>>>> # BR2_PACKAGE_IW is not set
>>>>>>
>>>>>> #
>>>>>> # Kismet requires a toolchain with C++ support enabled
>>>>>> #
>>>>>> # BR2_PACKAGE_XL2TP is not set
>>>>>> # BR2_PACKAGE_LIGHTTPD is not set
>>>>>> # BR2_PACKAGE_LINKS is not set
>>>>>> # BR2_PACKAGE_LRZSZ is not set
>>>>>> # BR2_PACKAGE_MII_DIAG is not set
>>>>>> # BR2_PACKAGE_MROUTED is not set
>>>>>> # BR2_PACKAGE_MUTT is not set
>>>>>> # BR2_PACKAGE_NBD is not set
>>>>>> # BR2_PACKAGE_NCFTP is not set
>>>>>> # BR2_PACKAGE_NETCAT is not set
>>>>>> # BR2_PACKAGE_NETKITBASE is not set
>>>>>> # BR2_PACKAGE_NETKITTELNET is not set
>>>>>> # BR2_PACKAGE_NETPLUG is not set
>>>>>> # BR2_PACKAGE_NETSNMP is not set
>>>>>> # BR2_PACKAGE_NETSTAT_NAT is not set
>>>>>> # BR2_PACKAGE_NFS_UTILS is not set
>>>>>> # BR2_PACKAGE_NGIRCD is not set
>>>>>> BR2_PACKAGE_NTP=y
>>>>>> # BR2_PACKAGE_NTP_SNTP is not set
>>>>>> # BR2_PACKAGE_NTP_NTP_KEYGEN is not set
>>>>>> BR2_PACKAGE_NTP_NTPD=y
>>>>>> BR2_PACKAGE_NTP_NTPDATE=y
>>>>>> # BR2_PACKAGE_NTP_NTPDC is not set
>>>>>> BR2_PACKAGE_NTP_NTPQ=y
>>>>>> BR2_PACKAGE_NTP_TICKADJ=y
>>>>>> # BR2_PACKAGE_NUTTCP is not set
>>>>>> # BR2_PACKAGE_OLSR is not set
>>>>>> # BR2_PACKAGE_OPENNTPD is not set
>>>>>> # BR2_PACKAGE_OPENSSH is not set
>>>>>> # BR2_PACKAGE_OPENVPN is not set
>>>>>> # BR2_PACKAGE_PORTMAP is not set
>>>>>> # BR2_PACKAGE_PPPD is not set
>>>>>> # BR2_PACKAGE_RADVD is not set
>>>>>> # BR2_PACKAGE_PPTP_LINUX is not set
>>>>>> # BR2_PACKAGE_PROFTPD is not set
>>>>>> # BR2_PACKAGE_QUAGGA is not set
>>>>>> # BR2_PACKAGE_RSH_REDONE is not set
>>>>>> # BR2_PACKAGE_RSYNC is not set
>>>>>> # BR2_PACKAGE_SAMBA is not set
>>>>>> # BR2_PACKAGE_SER2NET is not set
>>>>>> # BR2_PACKAGE_SOCAT is not set
>>>>>> # BR2_PACKAGE_SPAWN_FCGI is not set
>>>>>>
>>>>>> #
>>>>>> # Squid requires a toolchain with C++ and IPv6 support enabled
>>>>>> #
>>>>>> # BR2_PACKAGE_STUNNEL is not set
>>>>>> # BR2_PACKAGE_TCPDUMP is not set
>>>>>> # BR2_PACKAGE_TCPREPLAY is not set
>>>>>> # BR2_PACKAGE_TFTPD is not set
>>>>>> # BR2_PACKAGE_THTTPD is not set
>>>>>> # BR2_PACKAGE_TINYHTTPD is not set
>>>>>> # BR2_PACKAGE_TN5250 is not set
>>>>>> # BR2_PACKAGE_TTCP is not set
>>>>>> # BR2_PACKAGE_UDPCAST is not set
>>>>>> # BR2_PACKAGE_VPNC is not set
>>>>>> BR2_PACKAGE_VSFTPD=y
>>>>>> # BR2_PACKAGE_VTUN is not set
>>>>>> # BR2_PACKAGE_WGET is not set
>>>>>> # BR2_PACKAGE_WIRELESS_TOOLS is not set
>>>>>> # BR2_PACKAGE_WPA_SUPPLICANT is not set
>>>>>>
>>>>>> #
>>>>>> # Package managers
>>>>>> #
>>>>>> # BR2_PACKAGE_IPKG is not set
>>>>>>
>>>>>> #
>>>>>> # rpm requires libneon with SSL, XML and ZLIB support
>>>>>> #
>>>>>>
>>>>>> #
>>>>>> # xz payload support requires a toolchain with c++ support
>>>>>> #
>>>>>>
>>>>>> #
>>>>>> # Shell and utilities
>>>>>> #
>>>>>> # BR2_PACKAGE_AT is not set
>>>>>> # BR2_PACKAGE_BASH is not set
>>>>>> # BR2_PACKAGE_DASH is not set
>>>>>> # BR2_PACKAGE_DIALOG is not set
>>>>>> # BR2_PACKAGE_FILE is not set
>>>>>> # BR2_PACKAGE_INOTIFY_TOOLS is not set
>>>>>> # BR2_PACKAGE_LOCKFILE_PROGS is not set
>>>>>> # BR2_PACKAGE_LOGROTATE is not set
>>>>>> # BR2_PACKAGE_SCREEN is not set
>>>>>> # BR2_PACKAGE_SUDO is not set
>>>>>> # BR2_PACKAGE_WHICH is not set
>>>>>> # BR2_PACKAGE_XMLSTARLET is not set
>>>>>>
>>>>>> #
>>>>>> # System tools
>>>>>> #
>>>>>> # BR2_PACKAGE_ACL is not set
>>>>>> # BR2_PACKAGE_ATTR is not set
>>>>>> # BR2_PACKAGE_BOOTUTILS is not set
>>>>>> # BR2_PACKAGE_HTOP is not set
>>>>>> # BR2_PACKAGE_MODULE_INIT_TOOLS is not set
>>>>>> # BR2_PACKAGE_PROCPS is not set
>>>>>> # BR2_PACKAGE_PSMISC is not set
>>>>>> # BR2_PACKAGE_RSYSLOG is not set
>>>>>> # BR2_PACKAGE_SYSKLOGD is not set
>>>>>> # BR2_PACKAGE_SYSVINIT is not set
>>>>>> BR2_PACKAGE_UTIL_LINUX=y
>>>>>> BR2_PACKAGE_UTIL_LINUX_MOUNT=y
>>>>>> BR2_PACKAGE_UTIL_LINUX_FSCK=y
>>>>>> # BR2_PACKAGE_UTIL_LINUX_LIBMOUNT is not set
>>>>>> BR2_PACKAGE_UTIL_LINUX_LIBUUID=y
>>>>>> # BR2_PACKAGE_UTIL_LINUX_UUIDD is not set
>>>>>> BR2_PACKAGE_UTIL_LINUX_LIBBLKID=y
>>>>>> # BR2_PACKAGE_UTIL_LINUX_AGETTY is not set
>>>>>> # BR2_PACKAGE_UTIL_LINUX_CRAMFS is not set
>>>>>> # BR2_PACKAGE_UTIL_LINUX_SWITCH_ROOT is not set
>>>>>> # BR2_PACKAGE_UTIL_LINUX_PIVOT_ROOT is not set
>>>>>> # BR2_PACKAGE_UTIL_LINUX_FALLOCATE is not set
>>>>>> # BR2_PACKAGE_UTIL_LINUX_UNSHARE is not set
>>>>>> # BR2_PACKAGE_UTIL_LINUX_RENAME is not set
>>>>>> # BR2_PACKAGE_UTIL_LINUX_SCHEDUTILS is not set
>>>>>> # BR2_PACKAGE_UTIL_LINUX_WALL is not set
>>>>>> # BR2_PACKAGE_UTIL_LINUX_ARCH is not set
>>>>>> # BR2_PACKAGE_UTIL_LINUX_INIT is not set
>>>>>> # BR2_PACKAGE_UTIL_LINUX_KILL is not set
>>>>>> # BR2_PACKAGE_UTIL_LINUX_LAST is not set
>>>>>> # BR2_PACKAGE_UTIL_LINUX_MESG is not set
>>>>>> # BR2_PACKAGE_UTIL_LINUX_PARTX is not set
>>>>>> # BR2_PACKAGE_UTIL_LINUX_RAW is not set
>>>>>> # BR2_PACKAGE_UTIL_LINUX_RESET is not set
>>>>>> # BR2_PACKAGE_UTIL_LINUX_LOGIN_UTILS is not set
>>>>>> # BR2_PACKAGE_UTIL_LINUX_WRITE is not set
>>>>>>
>>>>>> #
>>>>>> # Text editors and viewers
>>>>>> #
>>>>>> # BR2_PACKAGE_ED is not set
>>>>>> # BR2_PACKAGE_LESS is not set
>>>>>> BR2_PACKAGE_NANO=y
>>>>>> # BR2_PACKAGE_UEMACS is not set
>>>>>> # BR2_PACKAGE_VIM is not set
>>>>>>
>>>>>> #
>>>>>> # Filesystem images
>>>>>> #
>>>>>> # BR2_TARGET_ROOTFS_CRAMFS is not set
>>>>>> # BR2_TARGET_ROOTFS_CLOOP is not set
>>>>>> BR2_TARGET_ROOTFS_EXT2=y
>>>>>> BR2_TARGET_ROOTFS_EXT2_BLOCKS=0
>>>>>> BR2_TARGET_ROOTFS_EXT2_INODES=0
>>>>>> BR2_TARGET_ROOTFS_EXT2_RESBLKS=0
>>>>>> BR2_TARGET_ROOTFS_EXT2_NONE=y
>>>>>> # BR2_TARGET_ROOTFS_EXT2_GZIP is not set
>>>>>> # BR2_TARGET_ROOTFS_EXT2_BZIP2 is not set
>>>>>> # BR2_TARGET_ROOTFS_EXT2_LZMA is not set
>>>>>> # BR2_TARGET_ROOTFS_JFFS2 is not set
>>>>>> # BR2_TARGET_ROOTFS_UBIFS is not set
>>>>>> # BR2_TARGET_ROOTFS_SQUASHFS is not set
>>>>>> # BR2_TARGET_ROOTFS_TAR is not set
>>>>>> # BR2_TARGET_ROOTFS_CPIO is not set
>>>>>> # BR2_TARGET_ROOTFS_ISO9660 is not set
>>>>>> # BR2_TARGET_ROOTFS_INITRAMFS is not set
>>>>>> # BR2_TARGET_ROOTFS_ROMFS is not set
>>>>>>
>>>>>> #
>>>>>> # Bootloaders
>>>>>> #
>>>>>> # BR2_TARGET_BAREBOX is not set
>>>>>> # BR2_TARGET_GRUB is not set
>>>>>> BR2_TARGET_SYSLINUX=y
>>>>>> # BR2_TARGET_SYSLINUX_ISOLINUX is not set
>>>>>> # BR2_TARGET_SYSLINUX_PXELINUX is not set
>>>>>> # BR2_TARGET_UBOOT is not set
>>>>>>
>>>>>> #
>>>>>> # Kernel
>>>>>> #
>>>>>> BR2_LINUX_KERNEL=y
>>>>>> # BR2_LINUX_KERNEL_2_6_39 is not set
>>>>>> # BR2_LINUX_KERNEL_SAME_AS_HEADERS is not set
>>>>>> BR2_LINUX_KERNEL_CUSTOM_VERSION=y
>>>>>> # BR2_LINUX_KERNEL_CUSTOM_TARBALL is not set
>>>>>> # BR2_LINUX_KERNEL_CUSTOM_GIT is not set
>>>>>> BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.0.4"
>>>>>> BR2_LINUX_KERNEL_VERSION="3.0.4"
>>>>>> BR2_LINUX_KERNEL_PATCH=""
>>>>>> # BR2_LINUX_KERNEL_USE_DEFCONFIG is not set
>>>>>> BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
>>>>>> BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="/home/marc/linux-3.0.4/.config"
>>>>>> BR2_LINUX_KERNEL_BZIMAGE=y
>>>>>> # BR2_LINUX_KERNEL_IMAGE_TARGET_CUSTOM is not set
>>>>>> BR2_LINUX_KERNEL_INSTALL_TARGET=y
>>>>>>
>>>>>>
>>>>>>
>>>>>> _______________________________________________
>>>>>> buildroot mailing list
>>>>>> buildroot at busybox.net
>>>>>> http://lists.busybox.net/mailman/listinfo/buildroot
>>>>>>
>>>>>
>>>> _______________________________________________
>>>> buildroot mailing list
>>>> buildroot at busybox.net
>>>> http://lists.busybox.net/mailman/listinfo/buildroot
>>>>
>>>>
>>>>
>>> _______________________________________________
>>> buildroot mailing list
>>> buildroot at busybox.net
>>> http://lists.busybox.net/mailman/listinfo/buildroot
>>>
>>
>>
>


More information about the buildroot mailing list