[Buildroot] [PATCH] docs: Configuration path update
Trevor Woerner
twoerner at gmail.com
Mon Nov 21 22:06:46 UTC 2011
From: Trevor Woerner <twoerner at gmail.com>
Update the procedure for modifying /etc/inittab's getty line with
the correct port and baud values to reflect their current names and
locations in the Buildroot configuration.
Signed-off-by: Trevor Woerner <twoerner at gmail.com>
---
docs/buildroot.html | 6 +++---
1 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/docs/buildroot.html b/docs/buildroot.html
index 2314d10..d5be127 100644
--- a/docs/buildroot.html
+++ b/docs/buildroot.html
@@ -1787,9 +1787,9 @@ Starting dropbear sshd: generating rsa key... generating dsa key... OK</pre>
<p>then it means that your system is running, but didn't start a
shell on the serial console. In order to have the system start a
shell on your serial console, you have to go in the Buildroot
- configuration, <code>Target options</code>, enable <code>Generic
- serial port config</code>, and select the serial port and speed
- you would like to use for the shell. This will automatically tune
+ configuration, <code>System configuration</code>, and modify
+ <code>Port to run a getty (login prompt) on</code> and
+ <code>Baudrate to use</code> as appropriate. This will automatically tune
the <code>/etc/inittab</code> file of the generated system so that
a shell starts on the correct serial port.</p>
--
1.7.6.233.gd79bc
More information about the buildroot
mailing list