[Buildroot] [PATCH] Add Transmission package

Maxime Ripard maxime.ripard at free-electrons.com
Mon Nov 14 12:17:06 UTC 2011


Ping ?

On 12/10/2011 17:22, Maxime Ripard wrote:
> From: Maxime Ripard <maxime at free-electrons.com>
> 
> Initial work by marcus.osdoba at googlemail.com
> 
> Signed-off-by: Maxime Ripard <maxime at free-electrons.com>
> ---
>  package/Config.in                    |    1 +
>  package/transmission/Config.in       |   35 ++++++++
>  package/transmission/S92transmission |  161 ++++++++++++++++++++++++++++++++++
>  package/transmission/transmission.mk |   47 ++++++++++
>  4 files changed, 244 insertions(+), 0 deletions(-)
>  create mode 100644 package/transmission/Config.in
>  create mode 100644 package/transmission/S92transmission
>  create mode 100644 package/transmission/transmission.mk
> 
> diff --git a/package/Config.in b/package/Config.in
> index 904ebb6..088cde6 100644
> --- a/package/Config.in
> +++ b/package/Config.in
> @@ -475,6 +475,7 @@ source "package/thttpd/Config.in"
>  source "package/tinyhttpd/Config.in"
>  endif
>  source "package/tn5250/Config.in"
> +source "package/transmission/Config.in"
>  source "package/ttcp/Config.in"
>  source "package/udpcast/Config.in"
>  source "package/vpnc/Config.in"
> diff --git a/package/transmission/Config.in b/package/transmission/Config.in
> new file mode 100644
> index 0000000..fc51c02
> --- /dev/null
> +++ b/package/transmission/Config.in
> @@ -0,0 +1,35 @@
> +config BR2_PACKAGE_TRANSMISSION
> +	bool "transmission"
> +	depends on BR2_INET_IPV6
> +	select BR2_PACKAGE_ZLIB
> +	select BR2_PACKAGE_OPENSSL
> +	select BR2_PACKAGE_LIBCURL
> +	select BR2_PACKAGE_LIBEVENT
> +	help
> +	  Transmission is a cross-platform BitTorrent client.
> +
> +comment "Transmission requires a toolchain with IPv6 support"
> +	depends on !BR2_INET_IPV6
> +
> +if BR2_PACKAGE_TRANSMISSION
> +
> +config BR2_PACKAGE_TRANSMISSION_UTP
> +	bool "Transmission uTP support"
> +	depends on BR2_INSTALL_LIBSTDCPP
> +	help
> +	  Install support for uTorrent Transport Protocol
> +
> +comment "uTP requires a toolchain with C++ support"
> +	depends on !BR2_INSTALL_LIBSTDCPP
> +
> +config BR2_PACKAGE_TRANSMISSION_CLI
> +	bool "transmission-cli"
> +	help
> +	  Install transmission command line interface.
> +
> +config BR2_PACKAGE_TRANSMISSION_REMOTE
> +	bool "transmission-remote"
> +	default y
> +	help
> +	  Install transmission remote management tool.
> +endif
> diff --git a/package/transmission/S92transmission b/package/transmission/S92transmission
> new file mode 100644
> index 0000000..f226154
> --- /dev/null
> +++ b/package/transmission/S92transmission
> @@ -0,0 +1,161 @@
> +#!/bin/sh
> +
> +# Original Author: Lennart A. Jtte, based on Rob Howell's script
> +# Modified by Maarten Van Coile & others (on IRC)
> +
> +# Changes for buildroot:
> +# USERNAME points to 'default' in standard installation
> +# TODO: set logfile with --logfile option
> +
> +# Do NOT "set -e"
> +
> +#
> +# ----- CONFIGURATION -----
> +#
> +# For the default location Transmission uses, visit:
> +# http://trac.transmissionbt.com/wiki/ConfigFiles
> +# For a guide on how set the preferences, visit:
> +# http://trac.transmissionbt.com/wiki/EditConfigFiles
> +# For the available environement variables, visit:
> +# http://trac.transmissionbt.com/wiki/EnvironmentVariables
> +#
> +# The name of the user that should run Transmission.
> +# It's RECOMENDED to run Transmission in it's own user,
> +# by default, this is set to 'transmission'.
> +# For the sake of security you shouldn't set a password
> +# on this user
> +#USERNAME=transmission
> +USERNAME=default
> +
> +
> +
> +# ----- *ADVANCED* CONFIGURATION -----
> +# Only change these options if you know what you are doing!
> +#
> +# The folder where Transmission stores the config & web files.
> +# ONLY change this you have it at a non-default location
> +#TRANSMISSION_HOME="/var/config/transmission-daemon"
> +#TRANSMISSION_WEB_HOME="/usr/share/transmission/web"
> +#
> +# The arguments passed on to transmission-daemon.
> +# ONLY change this you need to, otherwise use the
> +# settings file as per above.
> +#TRANSMISSION_ARGS=""
> +
> +
> +# ----- END OF CONFIGURATION -----
> +#
> +# PATH should only include /usr/* if it runs after the mountnfs.sh script.
> +PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
> +DESC="bittorrent client"
> +NAME=transmission-daemon
> +DAEMON=$(which $NAME)
> +PIDFILE=/var/run/$NAME.pid
> +SCRIPTNAME=/etc/init.d/$NAME
> +
> +# Exit if the package is not installed
> +[ -x "$DAEMON" ] || exit 0
> +
> +# Read configuration variable file if it is present
> +[ -r /etc/default/$NAME ] && . /etc/default/$NAME
> +
> +# Load the VERBOSE setting and other rcS variables
> +[ -f /etc/default/rcS ] && . /etc/default/rcS
> +
> +#
> +# Function that starts the daemon/service
> +#
> +
> +do_start()
> +{
> +    # Export the configuration/web directory, if set
> +    if [ -n "$TRANSMISSION_HOME" ]; then
> +          export TRANSMISSION_HOME
> +    fi
> +    if [ -n "$TRANSMISSION_WEB_HOME" ]; then
> +          export TRANSMISSION_WEB_HOME
> +    fi
> +
> +    # Return
> +    #   0 if daemon has been started
> +    #   1 if daemon was already running
> +    #   2 if daemon could not be started
> +    start-stop-daemon --chuid $USERNAME --start --pidfile $PIDFILE --make-pidfile \
> +            --exec $DAEMON --background --test -- -f $TRANSMISSION_ARGS > /dev/null \
> +            || return 1
> +    start-stop-daemon --chuid $USERNAME --start --pidfile $PIDFILE --make-pidfile \
> +            --exec $DAEMON --background -- -f $TRANSMISSION_ARGS \
> +            || return 2
> +}
> +
> +#
> +# Function that stops the daemon/service
> +#
> +do_stop()
> +{
> +        # Return
> +        #   0 if daemon has been stopped
> +        #   1 if daemon was already stopped
> +        #   2 if daemon could not be stopped
> +        #   other if a failure occurred
> +        start-stop-daemon --stop --quiet --retry=TERM/10/KILL/5 --pidfile $PIDFILE --name $NAME
> +        RETVAL="$?"
> +        [ "$RETVAL" = 2 ] && return 2
> +
> +        # Wait for children to finish too if this is a daemon that forks
> +        # and if the daemon is only ever run from this initscript.
> +        # If the above conditions are not satisfied then add some other code
> +        # that waits for the process to drop all resources that could be
> +        # needed by services started subsequently.  A last resort is to
> +        # sleep for some time.
> +
> +        start-stop-daemon --stop --quiet --oknodo --retry=0/30/KILL/5 --exec $DAEMON
> +        [ "$?" = 2 ] && return 2
> +
> +        # Many daemons don't delete their pidfiles when they exit.
> +        rm -f $PIDFILE
> +
> +        return "$RETVAL"
> +}
> +
> +case "$1" in
> +  start)
> +        echo "Starting $DESC" "$NAME..."
> +        do_start
> +        case "$?" in
> +                0|1) echo "   Starting $DESC $NAME succeeded" ;;
> +                *)   echo "   Starting $DESC $NAME failed" ;;
> +        esac
> +        ;;
> +  stop)
> +        echo "Stopping $DESC $NAME..."
> +        do_stop
> +        case "$?" in
> +                0|1) echo "   Stopping $DESC $NAME succeeded" ;;
> +                *)   echo "   Stopping $DESC $NAME failed" ;;
> +        esac
> +        ;;
> +  restart|force-reload)
> +        #
> +        # If the "reload" option is implemented then remove the
> +        # 'force-reload' alias
> +        #
> +        echo "Restarting $DESC $NAME..."
> +        do_stop
> +        case "$?" in
> +          0|1)
> +                do_start
> +                case "$?" in
> +                    0|1) echo "   Restarting $DESC $NAME succeeded" ;;
> +                    *)   echo "   Restarting $DESC $NAME failed: couldn't start $NAME" ;;
> +                esac
> +                ;;
> +          *)
> +                echo "   Restarting $DESC $NAME failed: couldn't stop $NAME" ;;
> +        esac
> +        ;;
> +  *)
> +        echo "Usage: $SCRIPTNAME {start|stop|restart|force-reload}" >&2
> +        exit 3
> +        ;;
> +esac
> diff --git a/package/transmission/transmission.mk b/package/transmission/transmission.mk
> new file mode 100644
> index 0000000..451b525
> --- /dev/null
> +++ b/package/transmission/transmission.mk
> @@ -0,0 +1,47 @@
> +#############################################################
> +#
> +# transmission
> +#
> +#############################################################
> +TRANSMISSION_VERSION = 2.33
> +TRANSMISSION_SITE = http://download.transmissionbt.com/files/
> +TRANSMISSION_SOURCE = transmission-$(TRANSMISSION_VERSION).tar.bz2
> +TRANSMISSION_DEPENDENCIES = \
> +	host-pkg-config \
> +	libcurl \
> +	libevent \
> +	openssl \
> +	zlib
> +
> +TRANSMISSION_CONF_OPT = \
> +	--disable-gtk \
> +	--disable-libnotify \
> +	--enable-lightweight
> +
> +define TRANSMISSION_INIT_SCRIPT_INSTALL
> +	[ -f $(TARGET_DIR)/etc/init.d/S92transmission ] || \
> +		$(INSTALL) -m 0755 -D package/transmission/S92transmission \
> +			$(TARGET_DIR)/etc/init.d/S92transmission
> +endef
> +
> +ifeq ($(BR2_PACKAGE_TRANSMISSION_UTP),y)
> +	TRANSMISSION_CONF_OPT += --enable-utp
> +else
> +	TRANSMISSION_CONF_OPT += --disable-utp
> +endif
> +
> +ifeq ($(BR2_PACKAGE_TRANSMISSION_CLI),y)
> +	TRANSMISSION_CONF_OPT += --enable-cli
> +else
> +	TRANSMISSION_CONF_OPT += --disable-cli
> +endif
> +
> +
> +ifeq ($(BR2_PACKAGE_TRANSMISSION_REMOTE),y)
> +	TRANSMISSION_CONF_OPT += --enable-remote
> +else
> +	TRANSMISSION_CONF_OPT += --disable-remote
> +	TRANSMISSION_POST_INSTALL_TARGET_HOOKS += TRANSMISSION_INIT_SCRIPT_INSTALL
> +endif
> +
> +$(eval $(call AUTOTARGETS))


-- 
Maxime Ripard, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com


More information about the buildroot mailing list