[Buildroot] [PATCH 22/28] boot: rename BR2_TARGET_* to BR2_BOOT_*
Thomas Petazzoni
thomas.petazzoni at free-electrons.com
Tue Jul 5 19:54:13 UTC 2011
Signed-off-by: Thomas Petazzoni <thomas.petazzoni at free-electrons.com>
---
boot/at91bootstrap/Config.in | 18 +++---
boot/at91bootstrap/at91bootstrap.mk | 8 +-
boot/at91dataflashboot/Config.in | 2 +-
boot/at91dataflashboot/at91dataflashboot.mk | 2 +-
boot/barebox/Config.in | 8 +-
boot/barebox/barebox.mk | 12 ++--
boot/grub/Config.in | 94 +++++++++++++-------------
boot/grub/grub.mk | 50 +++++++-------
boot/syslinux/Config.in | 10 ++--
boot/syslinux/syslinux.mk | 6 +-
boot/u-boot/Config.in | 70 ++++++++++----------
boot/u-boot/u-boot.mk | 34 +++++-----
12 files changed, 157 insertions(+), 157 deletions(-)
diff --git a/boot/at91bootstrap/Config.in b/boot/at91bootstrap/Config.in
index f022dd5..26af93a 100644
--- a/boot/at91bootstrap/Config.in
+++ b/boot/at91bootstrap/Config.in
@@ -1,4 +1,4 @@
-menuconfig BR2_TARGET_AT91BOOTSTRAP
+menuconfig BR2_BOOT_AT91BOOTSTRAP
depends on BR2_arm
bool "AT91 Bootstrap"
help
@@ -8,9 +8,9 @@ menuconfig BR2_TARGET_AT91BOOTSTRAP
- Peripheral drivers such as PIO, PMC or SDRAMC...
- Physical media algorithm such as DataFlash, NandFlash, NOR Flash...
-if BR2_TARGET_AT91BOOTSTRAP
+if BR2_BOOT_AT91BOOTSTRAP
-config BR2_TARGET_AT91BOOTSTRAP_BOARD
+config BR2_BOOT_AT91BOOTSTRAP_BOARD
string "Bootstrap board"
default ""
help
@@ -18,22 +18,22 @@ config BR2_TARGET_AT91BOOTSTRAP_BOARD
choice
prompt "Boot Memory"
- default BR2_TARGET_AT91BOOTSTRAP_DATAFLASH
+ default BR2_BOOT_AT91BOOTSTRAP_DATAFLASH
help
Select Chip for which AT91 bootstrap should be built
-config BR2_TARGET_AT91BOOTSTRAP_DATAFLASH
+config BR2_BOOT_AT91BOOTSTRAP_DATAFLASH
bool "Data Flash"
-config BR2_TARGET_AT91BOOTSTRAP_NANDFLASH
+config BR2_BOOT_AT91BOOTSTRAP_NANDFLASH
bool "NAND Flash"
endchoice
-config BR2_TARGET_AT91BOOTSTRAP_MEMORY
+config BR2_BOOT_AT91BOOTSTRAP_MEMORY
string
- default "dataflash" if BR2_TARGET_AT91BOOTSTRAP_DATAFLASH
- default "nandflash" if BR2_TARGET_AT91BOOTSTRAP_NANDFLASH
+ default "dataflash" if BR2_BOOT_AT91BOOTSTRAP_DATAFLASH
+ default "nandflash" if BR2_BOOT_AT91BOOTSTRAP_NANDFLASH
endif
diff --git a/boot/at91bootstrap/at91bootstrap.mk b/boot/at91bootstrap/at91bootstrap.mk
index 66fc961..46627de 100644
--- a/boot/at91bootstrap/at91bootstrap.mk
+++ b/boot/at91bootstrap/at91bootstrap.mk
@@ -7,8 +7,8 @@ AT91BOOTSTRAP_VERSION := 1.16
AT91BOOTSTRAP_SITE := http://www.atmel.com/dyn/resources/prod_documents/
AT91BOOTSTRAP_SOURCE := AT91Bootstrap$(AT91BOOTSTRAP_VERSION).zip
-AT91BOOTSTRAP_BOARD := $(call qstrip,$(BR2_TARGET_AT91BOOTSTRAP_BOARD))
-AT91BOOTSTRAP_MEMORY := $(call qstrip,$(BR2_TARGET_AT91BOOTSTRAP_MEMORY))
+AT91BOOTSTRAP_BOARD := $(call qstrip,$(BR2_BOOT_AT91BOOTSTRAP_BOARD))
+AT91BOOTSTRAP_MEMORY := $(call qstrip,$(BR2_BOOT_AT91BOOTSTRAP_MEMORY))
AT91BOOTSTRAP_MAKE_SUBDIR := board/$(AT91BOOTSTRAP_BOARD)/$(AT91BOOTSTRAP_MEMORY)
AT91BOOTSTRAP_BINARY := $(AT91BOOTSTRAP_MAKE_SUBDIR)/$(AT91BOOTSTRAP_MEMORY)_$(AT91BOOTSTRAP_BOARD).bin
@@ -36,13 +36,13 @@ $(eval $(call GENTARGETS,boot,at91bootstrap))
# Toplevel Makefile options
#
#############################################################
-ifeq ($(BR2_TARGET_AT91BOOTSTRAP),y)
+ifeq ($(BR2_BOOT_AT91BOOTSTRAP),y)
TARGETS+=at91bootstrap
# we NEED a board name unless we're at make source
ifeq ($(filter source,$(MAKECMDGOALS)),)
ifeq ($(AT91BOOTSTRAP_BOARD),)
-$(error No AT91Bootstrap board name set. Check your BR2_TARGET_AT91BOOTSTRAP_BOARD setting)
+$(error No AT91Bootstrap board name set. Check your BR2_BOOT_AT91BOOTSTRAP_BOARD setting)
endif
endif
diff --git a/boot/at91dataflashboot/Config.in b/boot/at91dataflashboot/Config.in
index 88cd058..3ac2928 100644
--- a/boot/at91dataflashboot/Config.in
+++ b/boot/at91dataflashboot/Config.in
@@ -1,3 +1,3 @@
-menuconfig BR2_TARGET_AT91DATAFLASHBOOT
+menuconfig BR2_BOOT_AT91DATAFLASHBOOT
depends on BR2_arm
bool "AT91 DataFlashBoot"
diff --git a/boot/at91dataflashboot/at91dataflashboot.mk b/boot/at91dataflashboot/at91dataflashboot.mk
index 652b861..fb698ce 100644
--- a/boot/at91dataflashboot/at91dataflashboot.mk
+++ b/boot/at91dataflashboot/at91dataflashboot.mk
@@ -26,6 +26,6 @@ $(eval $(call GENTARGETS,boot,at91dataflashboot))
# Toplevel Makefile options
#
#############################################################
-ifeq ($(BR2_TARGET_AT91DATAFLASHBOOT),y)
+ifeq ($(BR2_BOOT_AT91DATAFLASHBOOT),y)
TARGETS+=at91dataflashboot
endif
diff --git a/boot/barebox/Config.in b/boot/barebox/Config.in
index a821c45..7f377a4 100644
--- a/boot/barebox/Config.in
+++ b/boot/barebox/Config.in
@@ -1,18 +1,18 @@
-menuconfig BR2_TARGET_BAREBOX
+menuconfig BR2_BOOT_BAREBOX
bool "Barebox"
help
The Barebox bootloader, formerly known as U-Boot v2.
http://www.barebox.org
-if BR2_TARGET_BAREBOX
-config BR2_TARGET_BAREBOX_BOARD_DEFCONFIG
+if BR2_BOOT_BAREBOX
+config BR2_BOOT_BAREBOX_BOARD_DEFCONFIG
string "board defconfig"
help
Name of the board for which Barebox should be built, without
the _defconfig suffix.
-config BR2_TARGET_BAREBOX_BAREBOXENV
+config BR2_BOOT_BAREBOX_BAREBOXENV
bool "bareboxenv tool in target"
help
Install bareboxenv tool in target.
diff --git a/boot/barebox/barebox.mk b/boot/barebox/barebox.mk
index 65a4f66..b844d43 100644
--- a/boot/barebox/barebox.mk
+++ b/boot/barebox/barebox.mk
@@ -9,11 +9,11 @@ BAREBOX_SOURCE := barebox-$(BAREBOX_VERSION).tar.bz2
BAREBOX_SITE := http://www.barebox.org/download/
BAREBOX_INSTALL_IMAGES = YES
-ifneq ($(BR2_TARGET_BAREBOX_BAREBOXENV),y)
+ifneq ($(BR2_BOOT_BAREBOX_BAREBOXENV),y)
BAREBOX_INSTALL_TARGET = NO
endif
-BAREBOX_BOARD_DEFCONFIG = $(call qstrip,$(BR2_TARGET_BAREBOX_BOARD_DEFCONFIG))
+BAREBOX_BOARD_DEFCONFIG = $(call qstrip,$(BR2_BOOT_BAREBOX_BOARD_DEFCONFIG))
ifeq ($(KERNEL_ARCH),i386)
BAREBOX_ARCH=x86
@@ -29,7 +29,7 @@ define BAREBOX_CONFIGURE_CMDS
$(MAKE) $(BAREBOX_MAKE_FLAGS) -C $(@D) $(BAREBOX_BOARD_DEFCONFIG)_defconfig
endef
-ifeq ($(BR2_TARGET_BAREBOX_BAREBOXENV),y)
+ifeq ($(BR2_BOOT_BAREBOX_BAREBOXENV),y)
define BAREBOX_BUILD_BAREBOXENV_CMDS
$(TARGET_CC) $(TARGET_CFLAGS) $(TARGET_LDFLAGS) -o $(@D)/bareboxenv \
$(@D)/scripts/bareboxenv.c
@@ -45,7 +45,7 @@ define BAREBOX_INSTALL_IMAGES_CMDS
cp $(@D)/barebox.bin $(BINARIES_DIR)
endef
-ifeq ($(BR2_TARGET_BAREBOX_BAREBOXENV),y)
+ifeq ($(BR2_BOOT_BAREBOX_BAREBOXENV),y)
define BAREBOX_INSTALL_TARGET_CMDS
cp $(@D)/bareboxenv $(TARGET_DIR)/usr/bin
endef
@@ -53,13 +53,13 @@ endif
$(eval $(call GENTARGETS,boot,barebox))
-ifeq ($(BR2_TARGET_BAREBOX),y)
+ifeq ($(BR2_BOOT_BAREBOX),y)
TARGETS+=barebox
# we NEED a board defconfig file unless we're at make source
ifeq ($(filter source,$(MAKECMDGOALS)),)
ifeq ($(BAREBOX_BOARD_DEFCONFIG),)
-$(error No Barebox defconfig file. Check your BR2_TARGET_BAREBOX_BOARD_DEFCONFIG setting)
+$(error No Barebox defconfig file. Check your BR2_BOOT_BAREBOX_BOARD_DEFCONFIG setting)
endif
endif
diff --git a/boot/grub/Config.in b/boot/grub/Config.in
index bc7a73e..462ef70 100644
--- a/boot/grub/Config.in
+++ b/boot/grub/Config.in
@@ -1,146 +1,146 @@
-config BR2_TARGET_GRUB
+config BR2_BOOT_GRUB
bool "grub"
depends on BR2_i386 || BR2_x86_64
help
The GRand Unified Bootloader for x86 systems.
-config BR2_TARGET_GRUB_SPLASH
+config BR2_BOOT_GRUB_SPLASH
bool "Splashimage support"
- depends on BR2_TARGET_GRUB
+ depends on BR2_BOOT_GRUB
help
Add support for splashimage.
A splashimage is a 14-color indexed .xpm picture which
is displayed as background for the grub menu.
-config BR2_TARGET_GRUB_DISKLESS
+config BR2_BOOT_GRUB_DISKLESS
bool "diskless support"
- depends on BR2_TARGET_GRUB
+ depends on BR2_BOOT_GRUB
help
enable diskless support
-config BR2_TARGET_GRUB_3c595
+config BR2_BOOT_GRUB_3c595
bool "3Com595 driver"
- depends on BR2_TARGET_GRUB
+ depends on BR2_BOOT_GRUB
help
enable 3Com595 driver
-config BR2_TARGET_GRUB_3c90x
+config BR2_BOOT_GRUB_3c90x
bool "3Com90x driver"
- depends on BR2_TARGET_GRUB
+ depends on BR2_BOOT_GRUB
help
enable 3Com90x driver
-config BR2_TARGET_GRUB_davicom
+config BR2_BOOT_GRUB_davicom
bool "Davicom driver"
- depends on BR2_TARGET_GRUB
+ depends on BR2_BOOT_GRUB
help
enable Davicom driver
-config BR2_TARGET_GRUB_e1000
+config BR2_BOOT_GRUB_e1000
bool "Etherexpress Pro/1000 driver"
- depends on BR2_TARGET_GRUB
+ depends on BR2_BOOT_GRUB
help
enable Etherexpress Pro/1000 driver
-config BR2_TARGET_GRUB_eepro100
+config BR2_BOOT_GRUB_eepro100
bool "Etherexpress Pro/100 driver"
- depends on BR2_TARGET_GRUB
+ depends on BR2_BOOT_GRUB
help
enable Etherexpress Pro/100 driver
-config BR2_TARGET_GRUB_epic100
+config BR2_BOOT_GRUB_epic100
bool "SMC 83c170 EPIC/100 driver"
- depends on BR2_TARGET_GRUB
+ depends on BR2_BOOT_GRUB
help
enable SMC 83c170 EPIC/100 driver
-config BR2_TARGET_GRUB_forcedeth
+config BR2_BOOT_GRUB_forcedeth
bool "Nvidia Geforce driver"
- depends on BR2_TARGET_GRUB
+ depends on BR2_BOOT_GRUB
help
enable Nvidia Geforce driver
-config BR2_TARGET_GRUB_natsemi
+config BR2_BOOT_GRUB_natsemi
bool "NatSemi DP8381x driver"
- depends on BR2_TARGET_GRUB
+ depends on BR2_BOOT_GRUB
help
enable NatSemi DP8381x driver
-config BR2_TARGET_GRUB_ns83820
+config BR2_BOOT_GRUB_ns83820
bool "NS83820 driver"
- depends on BR2_TARGET_GRUB
+ depends on BR2_BOOT_GRUB
help
enable NS83820 driver
-config BR2_TARGET_GRUB_ns8390
+config BR2_BOOT_GRUB_ns8390
bool "NE2000 PCI driver"
- depends on BR2_TARGET_GRUB
+ depends on BR2_BOOT_GRUB
help
enable NE2000 PCI driver
-config BR2_TARGET_GRUB_pcnet32
+config BR2_BOOT_GRUB_pcnet32
bool "AMD Lance/PCI PCNet/32 driver"
- depends on BR2_TARGET_GRUB
+ depends on BR2_BOOT_GRUB
help
enable AMD Lance/PCI PCNet/32 driver
-config BR2_TARGET_GRUB_pnic
+config BR2_BOOT_GRUB_pnic
bool "Bochs Pseudo Nic driver"
- depends on BR2_TARGET_GRUB
+ depends on BR2_BOOT_GRUB
help
enable Bochs Pseudo Nic driver
-config BR2_TARGET_GRUB_rtl8139
+config BR2_BOOT_GRUB_rtl8139
bool "Realtek 8139 driver"
- depends on BR2_TARGET_GRUB
+ depends on BR2_BOOT_GRUB
help
enable Realtek 8139 driver
-config BR2_TARGET_GRUB_r8169
+config BR2_BOOT_GRUB_r8169
bool "Realtek 8169 driver"
- depends on BR2_TARGET_GRUB
+ depends on BR2_BOOT_GRUB
help
enable Realtek 8169 driver
-config BR2_TARGET_GRUB_sis900
+config BR2_BOOT_GRUB_sis900
bool "SIS 900 and SIS 7016 driver"
- depends on BR2_TARGET_GRUB
+ depends on BR2_BOOT_GRUB
help
enable SIS 900 and SIS 7016 driver
-config BR2_TARGET_GRUB_tg3
+config BR2_BOOT_GRUB_tg3
bool "Broadcom Tigon3 driver"
- depends on BR2_TARGET_GRUB
+ depends on BR2_BOOT_GRUB
help
enable Broadcom Tigon3 driver
-config BR2_TARGET_GRUB_tulip
+config BR2_BOOT_GRUB_tulip
bool "Tulip driver"
- depends on BR2_TARGET_GRUB
+ depends on BR2_BOOT_GRUB
help
enable Tulip driver
-config BR2_TARGET_GRUB_tlan
+config BR2_BOOT_GRUB_tlan
bool "TI ThunderLAN driver"
- depends on BR2_TARGET_GRUB
+ depends on BR2_BOOT_GRUB
help
enable TI ThunderLAN driver
-config BR2_TARGET_GRUB_undi
+config BR2_BOOT_GRUB_undi
bool "PXE UNDI driver"
- depends on BR2_TARGET_GRUB
+ depends on BR2_BOOT_GRUB
help
enable PXE UNDI driver
-config BR2_TARGET_GRUB_via_rhine
+config BR2_BOOT_GRUB_via_rhine
bool "Rhine-I/II driver"
- depends on BR2_TARGET_GRUB
+ depends on BR2_BOOT_GRUB
help
enable Rhine-I/II driver
-config BR2_TARGET_GRUB_w89c840
+config BR2_BOOT_GRUB_w89c840
bool "Winbond W89c840 driver"
- depends on BR2_TARGET_GRUB
+ depends on BR2_BOOT_GRUB
help
enable Winbond W89c840 driver
diff --git a/boot/grub/grub.mk b/boot/grub/grub.mk
index 4938416..93238cb 100644
--- a/boot/grub/grub.mk
+++ b/boot/grub/grub.mk
@@ -14,29 +14,29 @@ ifeq ($(BR2_LARGEFILE),)
GRUB_CFLAGS+=-U_FILE_OFFSET_BITS
endif
-GRUB_CONFIG-$(BR2_TARGET_GRUB_SPLASH) += --enable-graphics
-GRUB_CONFIG-$(BR2_TARGET_GRUB_DISKLESS) += --enable-diskless
-GRUB_CONFIG-$(BR2_TARGET_GRUB_3c595) += --enable-3c595
-GRUB_CONFIG-$(BR2_TARGET_GRUB_3c90x) += --enable-3c90x
-GRUB_CONFIG-$(BR2_TARGET_GRUB_davicom) += --enable-davicom
-GRUB_CONFIG-$(BR2_TARGET_GRUB_e1000) += --enable-e1000
-GRUB_CONFIG-$(BR2_TARGET_GRUB_eepro100) += --enable-eepro100
-GRUB_CONFIG-$(BR2_TARGET_GRUB_epic100) += --enable-epic100
-GRUB_CONFIG-$(BR2_TARGET_GRUB_forcedeth) += --enable-forcedeth
-GRUB_CONFIG-$(BR2_TARGET_GRUB_natsemi) += --enable-natsemi
-GRUB_CONFIG-$(BR2_TARGET_GRUB_ns83820) += --enable-ns83820
-GRUB_CONFIG-$(BR2_TARGET_GRUB_ns8390) += --enable-ns8390
-GRUB_CONFIG-$(BR2_TARGET_GRUB_pcnet32) += --enable-pcnet32
-GRUB_CONFIG-$(BR2_TARGET_GRUB_pnic) += --enable-pnic
-GRUB_CONFIG-$(BR2_TARGET_GRUB_rtl8139) += --enable-rtl8139
-GRUB_CONFIG-$(BR2_TARGET_GRUB_r8169) += --enable-r8169
-GRUB_CONFIG-$(BR2_TARGET_GRUB_sis900) += --enable-sis900
-GRUB_CONFIG-$(BR2_TARGET_GRUB_tg3) += --enable-tg3
-GRUB_CONFIG-$(BR2_TARGET_GRUB_tulip) += --enable-tulip
-GRUB_CONFIG-$(BR2_TARGET_GRUB_tlan) += --enable-tlan
-GRUB_CONFIG-$(BR2_TARGET_GRUB_undi) += --enable-undi
-GRUB_CONFIG-$(BR2_TARGET_GRUB_via_rhine) += --enable-via-rhine
-GRUB_CONFIG-$(BR2_TARGET_GRUB_w89c840) += --enable-w89c840
+GRUB_CONFIG-$(BR2_BOOT_GRUB_SPLASH) += --enable-graphics
+GRUB_CONFIG-$(BR2_BOOT_GRUB_DISKLESS) += --enable-diskless
+GRUB_CONFIG-$(BR2_BOOT_GRUB_3c595) += --enable-3c595
+GRUB_CONFIG-$(BR2_BOOT_GRUB_3c90x) += --enable-3c90x
+GRUB_CONFIG-$(BR2_BOOT_GRUB_davicom) += --enable-davicom
+GRUB_CONFIG-$(BR2_BOOT_GRUB_e1000) += --enable-e1000
+GRUB_CONFIG-$(BR2_BOOT_GRUB_eepro100) += --enable-eepro100
+GRUB_CONFIG-$(BR2_BOOT_GRUB_epic100) += --enable-epic100
+GRUB_CONFIG-$(BR2_BOOT_GRUB_forcedeth) += --enable-forcedeth
+GRUB_CONFIG-$(BR2_BOOT_GRUB_natsemi) += --enable-natsemi
+GRUB_CONFIG-$(BR2_BOOT_GRUB_ns83820) += --enable-ns83820
+GRUB_CONFIG-$(BR2_BOOT_GRUB_ns8390) += --enable-ns8390
+GRUB_CONFIG-$(BR2_BOOT_GRUB_pcnet32) += --enable-pcnet32
+GRUB_CONFIG-$(BR2_BOOT_GRUB_pnic) += --enable-pnic
+GRUB_CONFIG-$(BR2_BOOT_GRUB_rtl8139) += --enable-rtl8139
+GRUB_CONFIG-$(BR2_BOOT_GRUB_r8169) += --enable-r8169
+GRUB_CONFIG-$(BR2_BOOT_GRUB_sis900) += --enable-sis900
+GRUB_CONFIG-$(BR2_BOOT_GRUB_tg3) += --enable-tg3
+GRUB_CONFIG-$(BR2_BOOT_GRUB_tulip) += --enable-tulip
+GRUB_CONFIG-$(BR2_BOOT_GRUB_tlan) += --enable-tlan
+GRUB_CONFIG-$(BR2_BOOT_GRUB_undi) += --enable-undi
+GRUB_CONFIG-$(BR2_BOOT_GRUB_via_rhine) += --enable-via-rhine
+GRUB_CONFIG-$(BR2_BOOT_GRUB_w89c840) += --enable-w89c840
define GRUB_DEBIAN_PATCHES
# Apply the patches from the Debian patch
@@ -58,7 +58,7 @@ define GRUB_INSTALL_STAGING_CMDS
install -m 0755 -D $(@D)/grub/grub $(STAGING_DIR)/sbin/grub
endef
-ifeq ($(BR2_TARGET_GRUB_SPLASH),y)
+ifeq ($(BR2_BOOT_GRUB_SPLASH),y)
define GRUB_INSTALL_SPLASH
cp boot/grub/splash.xpm.gz $(TARGET_DIR)/boot/grub/
endef
@@ -89,6 +89,6 @@ $(eval $(call AUTOTARGETS,boot,grub))
# Toplevel Makefile options
#
#############################################################
-ifeq ($(BR2_TARGET_GRUB),y)
+ifeq ($(BR2_BOOT_GRUB),y)
TARGETS+=grub
endif
diff --git a/boot/syslinux/Config.in b/boot/syslinux/Config.in
index 60f3b8f..eaa3d70 100644
--- a/boot/syslinux/Config.in
+++ b/boot/syslinux/Config.in
@@ -1,16 +1,16 @@
-config BR2_TARGET_SYSLINUX
+config BR2_BOOT_SYSLINUX
bool "syslinux"
depends on BR2_i386 || BR2_x86_64
help
The syslinux bootloader for x86 systems.
This includes: syslinux, pxelinux, extlinux.
-config BR2_TARGET_SYSLINUX_ISOLINUX
+config BR2_BOOT_SYSLINUX_ISOLINUX
bool "Install isolinux"
- depends on BR2_TARGET_SYSLINUX
+ depends on BR2_BOOT_SYSLINUX
default y
-config BR2_TARGET_SYSLINUX_PXELINUX
+config BR2_BOOT_SYSLINUX_PXELINUX
bool "Install pxelinux"
- depends on BR2_TARGET_SYSLINUX
+ depends on BR2_BOOT_SYSLINUX
default y
diff --git a/boot/syslinux/syslinux.mk b/boot/syslinux/syslinux.mk
index d1b2907..1f50ed5 100644
--- a/boot/syslinux/syslinux.mk
+++ b/boot/syslinux/syslinux.mk
@@ -17,8 +17,8 @@ define SYSLINUX_BUILD_CMDS
$(TARGET_MAKE_ENV) $(MAKE) CC="$(HOSTCC)" AR="$(HOSTAR)" -C $(@D)
endef
-SYSLINUX_IMAGES-$(BR2_TARGET_SYSLINUX_ISOLINUX) += isolinux.bin
-SYSLINUX_IMAGES-$(BR2_TARGET_SYSLINUX_PXELINUX) += pxelinux.bin
+SYSLINUX_IMAGES-$(BR2_BOOT_SYSLINUX_ISOLINUX) += isolinux.bin
+SYSLINUX_IMAGES-$(BR2_BOOT_SYSLINUX_PXELINUX) += pxelinux.bin
define SYSLINUX_INSTALL_IMAGES_CMDS
for i in $(SYSLINUX_IMAGES-y); do \
@@ -33,6 +33,6 @@ $(eval $(call GENTARGETS,boot,syslinux))
# Toplevel Makefile options
#
#############################################################
-ifeq ($(BR2_TARGET_SYSLINUX),y)
+ifeq ($(BR2_BOOT_SYSLINUX),y)
TARGETS+=syslinux
endif
diff --git a/boot/u-boot/Config.in b/boot/u-boot/Config.in
index aada346..d9a6385 100644
--- a/boot/u-boot/Config.in
+++ b/boot/u-boot/Config.in
@@ -1,10 +1,10 @@
-menuconfig BR2_TARGET_UBOOT
+menuconfig BR2_BOOT_UBOOT
bool "U-Boot"
help
Build "Das U-Boot" Boot Monitor
-if BR2_TARGET_UBOOT
-config BR2_TARGET_UBOOT_BOARDNAME
+if BR2_BOOT_UBOOT
+config BR2_BOOT_UBOOT_BOARDNAME
string "U-Boot board name"
help
One of U-Boot supported boards to be built.
@@ -12,47 +12,47 @@ config BR2_TARGET_UBOOT_BOARDNAME
choice
prompt "U-Boot Version"
- default BR2_TARGET_UBOOT_2011_03
+ default BR2_BOOT_UBOOT_2011_03
help
Select the specific U-Boot version you want to use
-config BR2_TARGET_UBOOT_2011_03
+config BR2_BOOT_UBOOT_2011_03
bool "2011.03"
-config BR2_TARGET_UBOOT_2010_12
+config BR2_BOOT_UBOOT_2010_12
bool "2010.12"
-config BR2_TARGET_UBOOT_2010_09
+config BR2_BOOT_UBOOT_2010_09
bool "2010.09"
-config BR2_TARGET_UBOOT_2010_06
+config BR2_BOOT_UBOOT_2010_06
bool "2010.06"
-config BR2_TARGET_UBOOT_2010_03
+config BR2_BOOT_UBOOT_2010_03
bool "2010.03"
-config BR2_TARGET_UBOOT_CUSTOM_TARBALL
+config BR2_BOOT_UBOOT_CUSTOM_TARBALL
bool "Custom tarball"
endchoice
-if BR2_TARGET_UBOOT_CUSTOM_TARBALL
+if BR2_BOOT_UBOOT_CUSTOM_TARBALL
-config BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION
+config BR2_BOOT_UBOOT_CUSTOM_TARBALL_LOCATION
string "URL of custom U-Boot tarball"
endif
-config BR2_TARGET_UBOOT_VERSION
+config BR2_BOOT_UBOOT_VERSION
string
- default "2011.03" if BR2_TARGET_UBOOT_2011_03
- default "2010.12" if BR2_TARGET_UBOOT_2010_12
- default "2010.09" if BR2_TARGET_UBOOT_2010_09
- default "2010.06" if BR2_TARGET_UBOOT_2010_06
- default "2010.03" if BR2_TARGET_UBOOT_2010_03
- default "custom" if BR2_TARGET_UBOOT_CUSTOM_TARBALL
-
-config BR2_TARGET_UBOOT_CUSTOM_PATCH_DIR
+ default "2011.03" if BR2_BOOT_UBOOT_2011_03
+ default "2010.12" if BR2_BOOT_UBOOT_2010_12
+ default "2010.09" if BR2_BOOT_UBOOT_2010_09
+ default "2010.06" if BR2_BOOT_UBOOT_2010_06
+ default "2010.03" if BR2_BOOT_UBOOT_2010_03
+ default "custom" if BR2_BOOT_UBOOT_CUSTOM_TARBALL
+
+config BR2_BOOT_UBOOT_CUSTOM_PATCH_DIR
string "custom patch dir"
help
If your board requires custom patches, add the path to the
@@ -64,68 +64,68 @@ config BR2_TARGET_UBOOT_CUSTOM_PATCH_DIR
choice
prompt "U-Boot binary format"
-config BR2_TARGET_UBOOT_FORMAT_BIN
+config BR2_BOOT_UBOOT_FORMAT_BIN
bool "u-boot.bin"
-config BR2_TARGET_UBOOT_FORMAT_KWB
+config BR2_BOOT_UBOOT_FORMAT_KWB
depends on BR2_arm
bool "u-boot.kwb (Marvell)"
-config BR2_TARGET_UBOOT_FORMAT_LDR
+config BR2_BOOT_UBOOT_FORMAT_LDR
depends on BR2_bfin
bool "u-boot.ldr"
endchoice
-config BR2_TARGET_UBOOT_TOOL_ENV
+config BR2_BOOT_UBOOT_TOOL_ENV
bool "fw_printenv tool in target"
help
Install fw_printenv / fw_setenv tools in target.
-menuconfig BR2_TARGET_UBOOT_NETWORK
+menuconfig BR2_BOOT_UBOOT_NETWORK
bool "Network Settings"
default y
help
Network settings for U-boot
-if BR2_TARGET_UBOOT_NETWORK
+if BR2_BOOT_UBOOT_NETWORK
-config BR2_TARGET_UBOOT_SERVERIP
+config BR2_BOOT_UBOOT_SERVERIP
string "server ip"
default "10.175.196.221"
help
TFTP server ip address
-config BR2_TARGET_UBOOT_IPADDR
+config BR2_BOOT_UBOOT_IPADDR
string "ip address"
default "10.175.196.18"
help
Target ip address
-config BR2_TARGET_UBOOT_GATEWAY
+config BR2_BOOT_UBOOT_GATEWAY
string "gateway ip"
default "10.175.196.1"
help
Gateway ip address
-config BR2_TARGET_UBOOT_NETMASK
+config BR2_BOOT_UBOOT_NETMASK
string "netmask"
default "255.255.255.0"
help
Network Mask
-config BR2_TARGET_UBOOT_ETHADDR
+config BR2_BOOT_UBOOT_ETHADDR
string "ethernet address"
default "04:25:fe:ed:00:18"
help
Target MAC address for the ethernet interface.
This should be changed for production units
-config BR2_TARGET_UBOOT_ETH1ADDR
+config BR2_BOOT_UBOOT_ETH1ADDR
string "ethernet 2 address"
help
Target MAC address for the second ethernet interface.
-endif # BR2_TARGET_UBOOT_NETWORK
+endif # BR2_BOOT_UBOOT_NETWORK
-endif # BR2_TARGET_UBOOT
+endif # BR2_BOOT_UBOOT
diff --git a/boot/u-boot/u-boot.mk b/boot/u-boot/u-boot.mk
index 215b1c7..ecbf675 100644
--- a/boot/u-boot/u-boot.mk
+++ b/boot/u-boot/u-boot.mk
@@ -3,14 +3,14 @@
# U-Boot
#
#############################################################
-U_BOOT_VERSION = $(call qstrip,$(BR2_TARGET_UBOOT_VERSION))
-U_BOOT_BOARD_NAME = $(call qstrip,$(BR2_TARGET_UBOOT_BOARDNAME))
+U_BOOT_VERSION = $(call qstrip,$(BR2_BOOT_UBOOT_VERSION))
+U_BOOT_BOARD_NAME = $(call qstrip,$(BR2_BOOT_UBOOT_BOARDNAME))
U_BOOT_INSTALL_IMAGES = YES
ifeq ($(U_BOOT_VERSION),custom)
# Handle custom U-Boot tarballs as specified by the configuration
-U_BOOT_TARBALL = $(call qstrip,$(BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION))
+U_BOOT_TARBALL = $(call qstrip,$(BR2_BOOT_UBOOT_CUSTOM_TARBALL_LOCATION))
U_BOOT_SITE = $(dir $(U_BOOT_TARBALL))
U_BOOT_SOURCE = $(notdir $(U_BOOT_TARBALL))
else
@@ -19,10 +19,10 @@ U_BOOT_SITE = ftp://ftp.denx.de/pub/u-boot
U_BOOT_SOURCE = u-boot-$(U_BOOT_VERSION).tar.bz2
endif
-ifeq ($(BR2_TARGET_UBOOT_FORMAT_KWB),y)
+ifeq ($(BR2_BOOT_UBOOT_FORMAT_KWB),y)
U_BOOT_BIN = u-boot.kwb
U_BOOT_MAKE_TARGET = $(U_BOOT_BIN)
-else ifeq ($(BR2_TARGET_UBOOT_FORMAT_LDR),y)
+else ifeq ($(BR2_BOOT_UBOOT_FORMAT_LDR),y)
U_BOOT_BIN = u-boot.ldr
else
U_BOOT_BIN = u-boot.bin
@@ -52,9 +52,9 @@ $(if $(call qstrip,$(2)),
@echo '#define $(strip $(1)) $(call qstrip,$(2))' >> $(@D)/include/config.h)
endef
-ifneq ($(call qstrip,$(BR2_TARGET_UBOOT_CUSTOM_PATCH_DIR)),)
+ifneq ($(call qstrip,$(BR2_BOOT_UBOOT_CUSTOM_PATCH_DIR)),)
define U_BOOT_APPLY_CUSTOM_PATCHES
- toolchain/patch-kernel.sh $(@D) $(BR2_TARGET_UBOOT_CUSTOM_PATCH_DIR) \
+ toolchain/patch-kernel.sh $(@D) $(BR2_BOOT_UBOOT_CUSTOM_PATCH_DIR) \
u-boot-$(U_BOOT_VERSION)-\*.patch
endef
@@ -71,16 +71,16 @@ define U_BOOT_CONFIGURE_CMDS
@echo "#define __BR2_ADDED_CONFIG_H" >> $(@D)/include/config.h
$(call insert_define,DATE,$(DATE))
$(call insert_define,CONFIG_LOAD_SCRIPTS,1)
- $(call insert_define,CONFIG_IPADDR,$(BR2_TARGET_UBOOT_IPADDR))
- $(call insert_define,CONFIG_GATEWAYIP,$(BR2_TARGET_UBOOT_GATEWAY))
- $(call insert_define,CONFIG_NETMASK,$(BR2_TARGET_UBOOT_NETMASK))
- $(call insert_define,CONFIG_SERVERIP,$(BR2_TARGET_UBOOT_SERVERIP))
- $(call insert_define,CONFIG_ETHADDR,$(BR2_TARGET_UBOOT_ETHADDR))
- $(call insert_define,CONFIG_ETH1ADDR,$(BR2_TARGET_UBOOT_ETH1ADDR))
+ $(call insert_define,CONFIG_IPADDR,$(BR2_BOOT_UBOOT_IPADDR))
+ $(call insert_define,CONFIG_GATEWAYIP,$(BR2_BOOT_UBOOT_GATEWAY))
+ $(call insert_define,CONFIG_NETMASK,$(BR2_BOOT_UBOOT_NETMASK))
+ $(call insert_define,CONFIG_SERVERIP,$(BR2_BOOT_UBOOT_SERVERIP))
+ $(call insert_define,CONFIG_ETHADDR,$(BR2_BOOT_UBOOT_ETHADDR))
+ $(call insert_define,CONFIG_ETH1ADDR,$(BR2_BOOT_UBOOT_ETH1ADDR))
@echo "#endif /* __BR2_ADDED_CONFIG_H */" >> $(@D)/include/config.h
endef
-ifeq ($(BR2_TARGET_UBOOT_TOOL_ENV),y)
+ifeq ($(BR2_BOOT_UBOOT_TOOL_ENV),y)
define U_BOOT_BUILD_TARGET_ENV_UTILS
$(TARGET_CONFIGURE_OPTS) $(MAKE) HOSTCC="$(TARGET_CC)" -C $(@D) env
endef
@@ -97,7 +97,7 @@ define U_BOOT_INSTALL_IMAGES_CMDS
cp -dpf $(@D)/$(U_BOOT_BIN) $(BINARIES_DIR)/
endef
-ifeq ($(BR2_TARGET_UBOOT_TOOL_ENV),y)
+ifeq ($(BR2_BOOT_UBOOT_TOOL_ENV),y)
define U_BOOT_INSTALL_TARGET_ENV_UTILS
$(INSTALL) -m 0755 -D $(@D)/tools/env/fw_printenv \
$(TARGET_DIR)/usr/sbin/fw_printenv
@@ -116,13 +116,13 @@ $(eval $(call GENTARGETS,boot,u-boot))
# Toplevel Makefile options
#
#############################################################
-ifeq ($(BR2_TARGET_UBOOT),y)
+ifeq ($(BR2_BOOT_UBOOT),y)
TARGETS+=u-boot
# we NEED a board name unless we're at make source
ifeq ($(filter source,$(MAKECMDGOALS)),)
ifeq ($(U_BOOT_BOARD_NAME),)
-$(error NO U-Boot board name set. Check your BR2_TARGET_UBOOT_BOARDNAME setting)
+$(error NO U-Boot board name set. Check your BR2_BOOT_UBOOT_BOARDNAME setting)
endif
endif
--
1.7.4.1
More information about the buildroot
mailing list