[Buildroot] Urgent : at91rm9200 root file system
Dan Pattison
dan.pattison at ethertek.ca
Fri Feb 6 17:09:09 UTC 2009
Hello Sandeep:
To skip the file downloading, copy the linux-2.6.28.3.tar.bz2 file into
the buildroot/dl folder.
Regards,
Dan Pattison
Sandeep Kumar wrote:
> Hi Pattison,
>
> I am able to download the source from the link sent by you i.e.
> http://buildroot.uclibc.org/downloads/snapshots/buildroot-snapshot.tar.bz2
>
> After giving the "make at91rm9200df_defconfig" command configuration for
> my device was successful but after giving the "make" command it is
> downloading "linux-2.6.28.3.tar.bz2" which i have already downloaded.
>
> Is there any method to bypass this step and give the path of the
> downloaded "linux-2.6.28.3.tar.bz2".
>
> Thanks and Regards
> Sandeep
>
>
> On Fri, 2009-02-06 at 08:02 -0800, Dan Pattison wrote:
>
>> Hello Sandeep:
>>
>> The command works on my internet connection/linux computer. Make sure
>> you did not make any spelling mistakes. Copy paste the command from the
>> docs. Yes you can download the Buildroot package from here:
>> http://buildroot.uclibc.org/downloads/snapshots/buildroot-snapshot.tar.bz2
>>
>> This is all explained in the docs found here:
>> http://buildroot.uclibc.org/buildroot.html
>>
>> Best Regards,
>> Dan Pattison
>>
>>
>> Sandeep Kumar wrote:
>>
>>> Hi Pattison
>>>
>>> Thanks for reply
>>> I have tried with the commands sent by you but i am getting the
>>> following error:
>>>
>>> svn: Can't connect to host 'uclibc.org': Connection refused
>>>
>>> Can there be some authorization issue or so.
>>> I am able to access the website uclibc.org from internet. Is there
>>> anyway to download the package from there.
>>>
>>> Thanks and regards
>>> Sandeep
>>>
>>>
>>>
>>> On Fri, 2009-02-06 at 07:21 -0800, Dan Pattison wrote:
>>>
>>>
>>>> Sandeep:
>>>>
>>>> On the command line; navigate to the folder where you want your build
>>>> environment installed.
>>>> Type out this command:
>>>>
>>>> svn co svn://uclibc.org/trunk/buildroot
>>>>
>>>> It will download the current Buildroot files. Then type out:
>>>>
>>>> make at91rm9200df_defconfig
>>>>
>>>> Then type out:
>>>>
>>>> make
>>>>
>>>> Try that. Also the docs are here
>>>>
>>>> http://buildroot.uclibc.org/buildroot.html
>>>>
>>>> Best Regards,
>>>> Dan Pattison
>>>>
>>>>
>>>> Sandeep Kumar wrote:
>>>>
>>>>
>>>>> Hi Peter,
>>>>>
>>>>> Thanks once again for your response.
>>>>>
>>>>> Sorry!!!, I have not understood your reply. I am some what new to this
>>>>> platform. I am working on a linux machine and i do not have the source
>>>>> code for the root file system to make it. From where can i get the
>>>>> source code to build it for at91rm9200. Where should i execute the
>>>>> command sent by you (make at91rm9200df_defconfig; make) without having
>>>>> the source code. And if i am making some mistake can you please explain
>>>>> me in a little bit detail. I will be very thankful to you.
>>>>>
>>>>> Regards
>>>>> Sandeep
>>>>>
>>>>>
>>>>> On Fri, 2009-02-06 at 13:47 +0100, Peter Korsgaard wrote:
>>>>>
>>>>>
>>>>>
>>>>>>>>>>> "Sandeep" == Sandeep Kumar <sandeepk at verismonetworks.com> writes:
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>> Sandeep> Hi peter
>>>>>> Sandeep> Thanks for reply.
>>>>>>
>>>>>> Sandeep> For this I want the root file system source code which i
>>>>>> Sandeep> dont have. from where can i get it.
>>>>>>
>>>>>> Buildroot will download the sources and build the rootfs for you when
>>>>>> you run make.
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>> _______________________________________________
>>>>> buildroot mailing list
>>>>> buildroot at busybox.net
>>>>> http://lists.busybox.net/mailman/listinfo/buildroot
>>>>>
>>>>> ------------------------------------------------------------------------
>>>>>
>>>>>
>>>>> No virus found in this incoming message.
>>>>> Checked by AVG - www.avg.com
>>>>> Version: 8.0.233 / Virus Database: 270.10.18/1936 - Release Date: 01/29/09 17:57:00
>>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>
>>>
>>> ------------------------------------------------------------------------
>>>
>>>
>>> No virus found in this incoming message.
>>> Checked by AVG - www.avg.com
>>> Version: 8.0.233 / Virus Database: 270.10.18/1937 - Release Date: 01/29/09 17:57:00
>>>
>>>
>>>
>>
>
>
> ------------------------------------------------------------------------
>
>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com
> Version: 8.0.233 / Virus Database: 270.10.18/1937 - Release Date: 01/29/09 17:57:00
>
>
More information about the buildroot
mailing list