[Buildroot] [BR-AVR32] [PATCH] Support for new MIMC200 board
Hans-Christian Egtvedt
hans-christian.egtvedt at atmel.com
Tue Oct 7 08:43:45 UTC 2008
On Tue, 07 Oct 2008 09:33:35 +0100
Mark Jackson <mpfj at mimc.co.uk> wrote:
> Hans-Christian Egtvedt wrote:
> > On Mon, 06 Oct 2008 13:34:51 +0100
> > Mark Jackson <mpfj at mimc.co.uk> wrote:
> >
> >> Please consider the following patch which adds support for a new
> >> AVR32 based board.
> >>
> >> The board is closely based on Atmel's NGW100 reference board, but
> >> has an extra 8MByte FLASH and 128KByte FRAM.
> >>
> >> The compressed patch is 66k, so I've stuck it on our website.
> >>
> >> http://www.mimc.co.uk/mimc200-new-board.patch.bz2
> >>
> >
> > Could you post it in plain text attachment/inline instead? It is a
> > bit hard to comment on a compressed patch file ;)
>
> Urm ... the patch is about 220k uncompressed. I thought it was a
> "bad thing" to post such a large patch.
>
> However, I'm happy to do so if you want !!
>
Hmm, that was a bit large, yes.
You must split up your patch, it contains far more than just a new
board. Each patch should only add/change one feature in Buildroot.
I would also recommend that you get all the kernel and U-Boot stuff
upstream first, and then go for the Buildroot stuff.
> > Is the patch based on the latest uclibc.org repo or Buildroot for
> > AVR32 release (v2.2.0)?
>
> The latest svn (actually r23594).
>
Then it is better if you post it to uclibc.org mailing list, I import
stuff from uclibc.org, so eventually it will end up in my fork() as
well.
--
Best regards,
Hans-Christian Egtvedt
More information about the buildroot
mailing list