[Buildroot] Image arch/arm/boot/uImage is ready but cp command fail to get it,
Jean-Christian de Rivaz
jc at eclis.ch
Sun Apr 13 20:12:58 UTC 2008
Hello, I try to build the at91sam9261 target using the default
configuration with this command into a clean SVN HEAD:
( yes "" | make at91sam9261ek_defconfig ) && ( yes "" | make )
At the end of the kernel build I get this error:
GEN .version
CHK include/linux/compile.h
UPD include/linux/compile.h
CC init/version.o
LD init/built-in.o
LD .tmp_vmlinux1
KSYM .tmp_kallsyms1.S
AS .tmp_kallsyms1.o
LD .tmp_vmlinux2
KSYM .tmp_kallsyms2.S
AS .tmp_kallsyms2.o
LD vmlinux.o
MODPOST vmlinux.o
LD vmlinux
SYSMAP System.map
SYSMAP .tmp_System.map
OBJCOPY arch/arm/boot/Image
Kernel: arch/arm/boot/Image is ready
AS arch/arm/boot/compressed/head.o
GZIP arch/arm/boot/compressed/piggy.gz
CC arch/arm/boot/compressed/misc.o
AS arch/arm/boot/compressed/piggy.o
LD arch/arm/boot/compressed/vmlinux
OBJCOPY arch/arm/boot/zImage
Kernel: arch/arm/boot/zImage is ready
UIMAGE arch/arm/boot/uImage
Image Name: Linux-2.6.24.3
Created: Sun Apr 13 21:27:36 2008
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 1611064 Bytes = 1573.30 kB = 1.54 MB
Load Address: 0x20008000
Entry Point: 0x20008000
Image arch/arm/boot/uImage is ready
make[1]: Leaving directory
`/home/jcdr/try/buildroot/project_build_arm/at91sam9261ek/linux-2.6.24.3'
cp -pf
/home/jcdr/try/buildroot/project_build_arm/at91sam9261ek/linux-2.6.24.3/uImage
/home/jcdr/try/buildroot/binaries/at91sam9261ek/at91sam9261ek-linux-2.6.24.3-20080413
cp: cannot stat
`/home/jcdr/try/buildroot/project_build_arm/at91sam9261ek/linux-2.6.24.3/uImage':
No such file or directory
make: ***
[/home/jcdr/try/buildroot/binaries/at91sam9261ek/at91sam9261ek-linux-2.6.24.3-20080413]
Error 1
Why the "cp" command don't get the arch/arm/boot/uImage file that the
kernel Makefile have build ?
--
Jean-Christian de Rivaz
More information about the buildroot
mailing list