[Buildroot] svn commit: trunk/buildroot/target/device/Atmel/atngw100

Thiago A. Corrêa thiago.correa at gmail.com
Thu Sep 27 03:00:48 UTC 2007


Some 300 revisions ago, I was able to disable stdlibc++-v3 from the
make menuconfig. AFAIK, -v3 is some legacy stuff (?). Or is the
stdlibc++ from gcc 4.x still called -v3?

Back then it also didn't build. Now, I'm on -r2040 and I can't disable
it anymore, even thought I'm using the same .config

On 9/27/07, Ulf Samuelsson <ulf at atmel.com> wrote:
> ons 2007-09-26 klockan 23:02 +0200 skrev Bernhard Fischer:
> > On Thu, Sep 20, 2007 at 09:44:16AM -0700, ulf at uclibc.org wrote:
> > >Author: ulf
> > >Date: 2007-09-20 09:44:15 -0700 (Thu, 20 Sep 2007)
> > >New Revision: 19912
> > >
> > >Log:
> > >Enable CONFIG_SEQ in busybox for ngw100
> > >
> > >Modified:
> > >   trunk/buildroot/target/device/Atmel/atngw100/busybox-1.6.1.config
> >
> > That's interresting. atngw100_defconfig doesn't build for me since at
> > least some hundred revisions.
>
> The toolset builds in the Atmel trunk at www.atmel.no/buildroot.
> Something has broken after I checked in that toolset, and tested it.
> I have been spending a lot of time trying to find out why.
>
> When C++ is select, there is a problem with the current trunk.
> The Atmel trunk, using the same source builds fine.
> Something has happened with the toolchain makefile between July
> and now, causing lots of problems building stdc++ver3.
>
> Recently the uClibc for AVR32 build broke.
> uclibc-0.9.28.config does not have the statement
> # TARGET_avr32 is not set
> I believe it was present in uclibc-0.9.28.3.config
>
> I think that using the default uCLibc configuration file will
> therefore use 386 architecture by default (you will get a question)
> If the default is accepted, then things will break.
>
> I just checked in a minimal build which does not exhibit the uClibc
> problem.
>
> make atngw100small_defconfig
>
> should use a working uClibc config file
>
> Will test building it during the night to see if there are other
> problems.
>
> BR
> Ulf Samuelsson
>
>
> >
> > Can you please show me the exact commands that are ment to build this
> > config?
> >
> > PS: In fact, what ATMEL defconfig can i use as a reference if *any*
> > of these ATMEL targets is building successfully?
>
> _______________________________________________
> buildroot mailing list
> buildroot at uclibc.org
> http://busybox.net/mailman/listinfo/buildroot
>



More information about the buildroot mailing list