[Buildroot] Boost package settings for using cross-compiler ?
Claus Klein
claus.klein at arcormail.de
Tue Nov 21 20:12:22 UTC 2006
Hi,
we use boost with ppc crosscompiler, here is my buildroot package.
Sure, its depend an bjam installed on host, the buildroot C++ toolchain, theading, zlib, ....
Realy, a big package for an embedded device ;-)
Check the boost configuration in boost.mk!
Regards,
claus
On Monday 20 November 2006 16:46, MikeW wrote:
> I successfully (so I thought) created a package file for building the Boost C++
> libraries under buildroot, but when I came to use them, found they had been
> built using native (i386) tools, unlike the rest of the libraries built
> by Buildroot, which were ARM architecture.
>
> The top-level Boost config parameters do not appear to have a tool
> prefix or macro to support cross-tools.
>
> So - has anyone built Boost successfully before ?
>
> I imagine that if so, the distribution would already contain
> a package file for the library ...
>
> Regards,
> Mike
>
> _______________________________________________
> buildroot mailing list
> buildroot at uclibc.org
> http://busybox.net/mailman/listinfo/buildroot
>
>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: boost.tgz
Type: application/x-tgz
Size: 2544 bytes
Desc: not available
Url : http://lists.busybox.net/pipermail/buildroot/attachments/20061121/3ab5b92a/attachment-0002.bin
More information about the buildroot
mailing list